Loading…
Loading…
Tender Value
₹11.9 L
EMD Value
₹11,910
Closing Date
22 May 2026, 4:00 pmClosed
Executive Engineer, RWS & S (P) Division , Nandyal
Nandyal
Operation and Maintenance of CPWS Scheme to Mayalur and other habitations for the year 2026-27 in Nandyal District
933368
09/2026-27 dT:11-05-2026
OPEN - NCB
Civil Works
NANDYAL
7 documents required · 7 mandatory
₹422
₹11,910
17 May 2026
17 May 2026
17 May 2026
Operation and Maintenance of CPWS Scheme in the habitations including all charges for filling of SS Tank up to MWL, maintenance of crew and all labour charges (Pump Operator/ Electrician, Semi skilled Fitter/ Helper, Watchman) involved for Operation and Maintenance of pump sets, treatment plants, pipe lines, head works including transmission lines, distribution lines, service reservoirs and others like sluice valves excluding cost of materials like pipes, CID Joints, valves, repairs to pump sets including rewinding of electrical motors and including mixing of required quantity of gas chlorination daily excluding cost of gas chlorination and release of water through taps at the rate of 40 LPCD at prescribed time but excluding power consumption charges as envisaged in special conditions which will be paid by the department excluding GST Charges etc., complete., as per specification and direction of the department from 01-04-2026 to 31-03-2027. (The quantity of supply water in KL should be allowed from the date of commission of the agency)
Supply of bleaching powder including cost and conveyance of all materials and all labour charges etc., complete.,
Manufacture, supply and delivery of Unplasticised 75 mm dia PVC 6 kgs/ sqcms pipe s for portable water supplies confirming to IS:4985/2000(3Rd revision) with bell ends (Socket) as per specifications in light Grey/ Natural lvory/ any other colour except white ) inclusive of transportation to the sub-Divisional store any where in AP exluding all taxes.
Manufacture, supply and delivery of Unplasticised 90 mm dia PVC 6 kgs/ sqcms pipe s for portable water supplies confirming to IS:4985/2000(3Rd revision) with bell ends (Socket) as per specifications in light Grey/ Natural lvory/ any other colour except white ) inclusive of transportation to the sub-Divisional store any where in AP exluding all taxes.
Manufacture, supply and delivery of Unplasticised 140 mm dia PVC 6 kgs/ sqcms pipe s for portable water supplies confirming to IS:4985/2000(3Rd revision) with bell ends (Socket) as per specifications in light Grey/ Natural lvory/ any other colour except white ) inclusive of transportation to the sub-Divisional store any where in AP exluding all taxes.
Manufacture, supply and delivery of Unplasticised 160 mm dia PVC 6 kgs/ sqcms pipe s for portable water supplies confirming to IS:4985/2000(3Rd revision) with bell ends (Socket) as per specifications in light Grey/ Natural lvory/ any other colour except white ) inclusive of transportation to the sub-Divisional store any where in AP exluding all taxes.
Manufacture supply of 150mm dia AC pipe Class-15 Pressure pipe ( Mazza Process) as per BIS No. 1592/2003 as amended from time to time duly marked with BIS Mark including cost of material incidental handling , loading packing charges but exclusive of transportation, unloading stacking at departmental stores, and excluding all taxes . The pipes shall be tested at factory permises confirming to IS Code 1592/2003.
Earth work excavation of Pipe line leakage in 75mm dia PVC Pipe line 6 Kg/Cm2 of following diameter of different places including excavation manually or by machinery dewatering removing of mud cleaning of pipe and leakage portion cutting the pipe line jointing & replacing using CID Joints including CID Joint inclusive of using all required machinery, labour DG Set fuel operator CID Joints rubber rings, nuts bolts etc complete ( But excluding cost of pipe )
Earth work excavation of Pipe line leakage in 90mm dia PVC Pipe line 6 Kg/Cm2 of following diameter of different places including excavation manually or by machinery dewatering removing of mud cleaning of pipe and leakage portion cutting the pipe line jointing & replacing using CID Joints including CID Joint inclusive of using all required machinery, labour DG Set fuel operator CID Joints rubber rings, nuts bolts etc complete ( But excluding cost of pipe )
Earth work excavation of Pipe line leakage in 140mm dia PVC Pipe line 6 Kg/Cm2 of following diameter of different places including excavation manually or by machinery dewatering removing of mud cleaning of pipe and leakage portion cutting the pipe line jointing & replacing using CID Joints including CID Joint inclusive of using all required machinery, labour DG Set fuel operator CID Joints rubber rings, nuts bolts etc complete ( But excluding cost of pipe )
Earth work excavation of Pipe line leakage in 160mm dia PVC Pipe line 6 Kg/Cm2 of following diameter of different places including excavation manually or by machinery dewatering removing of mud cleaning of pipe and leakage portion cutting the pipe line jointing & replacing using CID Joints including CID Joint inclusive of using all required machinery, labour DG Set fuel operator CID Joints rubber rings, nuts bolts etc complete ( But excluding cost of pipe )
Earth work excavation of Pipeline leakage in 150mm AC Pipe line of following diameter of different places including necessary excavation manually or by machinery dewatering removing of mud cleaning of pipe and leakage portion cutting the pipe line & removing peice of pipe form trench with inclusive of machanical deviced JCB Hydraulic crane if necessary & labours required with providing material such Turned CID Joints rubber rings, nuts bolts etc complete ( But excluding cost of pipe )
Replacement of Capacitors at Head works an at intermediate pumping stations
Removal charges for 3.00 HP three phase monoblock pumpset including all labour charges etc complete
Removal charges for 7.50 HP three phase monoblock pumpset including all labour charges etc complete
Removal charges for 10.00 HP three phase monoblock pumpset including all labour charges etc complete
Rewinding charges for 3.00HP Mono Block pumpset for all types and makes copper wire overhauling with minor repairs testing for the original speed and no load consumption
Rewinding charges for 7.50HP Mono Block pumpset for all types and makes copper wire overhauling with minor repairs testing for the original speed and no load consumption
Rewinding charges for 10.00HP Mono Block pumpset for all types and makes copper wire overhauling with minor repairs testing for the original speed and no load consumption
Labour Charges for Errection of 3.00HP Mono Block pumpset including all labour charges
Labour Charges for Errection of 7.50HP Mono Block pumpset including all labour charges
Labour Charges for Errection of 7.50HP Mono Block pumpset including all labour charges
Fabrication, transportation and supply of wall mounted 7.5 HP control panel board size 600x600x250mm of 18 SWG CRCA sheet steel enclosure 14 SWG mounting plate for cable entry fabricated painted with two coats of Red oxide primer and two coats of grey paint lock and key arrangements two side louvres with weld mesh inside etc complete consisting of the following equipment with all internal wiring using LAURITZ KNUDSEN ( FORMERLY L&T) / Finolex copper FRLS Cables of suitable size and capacity and cable calmp etc complete for 3 phse motor pump sets
Fabrication, transportation and supply of wall mounted 10.00 HP control panel board size 600x600x250mm of 18 SWG CRCA sheet steel enclosure 14 SWG mounting plate for cable entry fabricated painted with two coats of Red oxide primer and two coats of grey paint lock and key arrangements two side louvres with weld mesh inside etc complete consisting of the following equipment with all internal wiring using LAURITZ KNUDSEN ( FORMERLY L&T) / Finolex copper FRLS Cables of suitable size and capacity and cable calmp etc complete for 3 phse motor pump sets
Supply and fixing of 4 squre mm 3 core copper flat finolex cable wire including all materials and all labour charges etc., complete
Supply and delivery of Temper proof DI Flanged single chamber 50 mm dia Air Valve Release ValveP.N 1.60 with Body and cover made of Ductile iron Grade GGG- 40/SG -400/15 or GGG-50/SG-500/7 or Equivalent as per ISI 865, IS:3896-2 with Food Grade Epoxy Power Coating (EP-P(Main: 250 Micron) inside and Uut side of Color Blue RAL 5005, All internal parts such as Float shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/ BIS/AWWA standards (or) Combination Flange drilling as per IS- 1538 and exclusive of all taxes and transportation
Supply and delivery of "Resilient Seated Soft Sealing" 80mm dia Gate Valves (Sluice Valves) PN 1.60 with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.
Supply and delivery of "Resilient Seated Soft Sealing"150 mm dia Gate Valves (Sluice Valves) PN 1.60 with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
AS Copy.pdf
TENDER_DOCUMENT • 0.49 MB
BOQ.xlsx
TENDER_DOCUMENT • 0.43 MB
NIT.doc
TENDER_DOCUMENT • 0.05 MB
CERTIFICATES IN THE M BOOK.doc
TENDER_DOCUMENT • 0.03 MB
O&M D L PERIOD 5 YEARS GORt No 2290 Dt 20-12-2012.PDF
TENDER_DOCUMENT • 0.17 MB
O&M RGISTERS MAINTAINED BY THE CONTRACTOR.doc
TENDER_DOCUMENT • 0.03 MB
O&M Special Conditions - I.doc
TENDER_DOCUMENT • 0.05 MB
O&M Special conditions - II.doc
TENDER_DOCUMENT • 0.04 MB
Thumbs.db
TENDER_DOCUMENT • 0.02 MB
VOL-1 Part-A.doc
TENDER_DOCUMENT • 0.22 MB
Vol-Part-B (No change).doc
TENDER_DOCUMENT • 0.20 MB
Chapter 5_3.pdf
TENDER_DOCUMENT • 0.44 MB
Chapter 10-12.pdf
TENDER_DOCUMENT • 0.50 MB
Prelims-Pages.pdf
TENDER_DOCUMENT • 0.12 MB
Chapter 13-16.pdf
TENDER_DOCUMENT • 0.81 MB
Chapter 17-20.pdf
TENDER_DOCUMENT • 0.24 MB
Chapter 6-9.pdf
TENDER_DOCUMENT • 0.84 MB
Cover-Final.pdf
TENDER_DOCUMENT • 1.87 MB
Chapter 1-4.pdf
TENDER_DOCUMENT • 0.31 MB
Download all tender documents and submit your bid