Welcome maintenance and misc B/R and E/M work for Offrs Md Accn under AGE B/R, GE Ludhiana

Amount

M&L for prepration of old decorated plastered or un-plastered surface of walls by brooming down or steel wire brushing to remove all loose dirt, dust, all loose scales of lime wash and foreign matters; scrapping down smoke soots, moulds, moss and efflorescent salts & trading oil and greasy spots, removing of nails, making good holes, cracks with lime putty/ plaster of paris and applying two coats of white wash with fibre brushes complete all as specified and directed.

All as per ser item No. 01 here-in-before but on ceiling surface complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of walls after complete removal of existing treatment by fine sand paper/ abrasive paper and dusting off to achieve even and smooth surfaces, scrapping down smoke soots, moulds, moss and efflorescent salts and trading oil and greasy spots, removing of nails, making good holes, cracks with lime putty/ plaster of paris, again rubbing down with sand paper to make the surface even and smooth and applying two coats of oil emulsion distemper (white/tinted) over and including 3 mm thick wall care putty filling with fibre brushes complete all as specified and directed

M&L for preparation of old surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for prepration of old painted surfaces of wooden or wood based materials of any description not otherwise described, exceeding 10 cm width or girth, by removing dust, dirt or any extraneous material, flat portion shall be smoothed with abrasive paper if requried, nails and joints etc shall be filled with paint and applying one coat of synthetic enamel paint with fibre brushes complete all as specified and directed.

All as per ser item No. 5 here-in-before but on steel surfaces complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above gd level) complete all as specified and directed.

M&L 25mm thick cement concrete (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in floors finished even and fair complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified & directed.

M&L non skid joint free ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as specified and directed.

All as per item No 10 above as in skirting over rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tile n. exc. 0.36 sqm laid in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) including necessary cutting as per site requirement complete all as specified and directed.

All as per item No 12 above as in skirting over rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L Glazed ceramic coloured tiles (300x450mm) x 7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match the shade of tile over 10mm thick rendering of in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in sunken portion excceding 15cm thickness in any description complete all as specified and directed.

M&L PCC (1:5:10) type E-2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for applying two coats of Shalimar supercrete / Nito Bond water proofing coating as approved on the entire surfaces of sunken portion complete all as specified and directed.

M&L for 15mm thick screed bed in cement mortar 1:3 admixed with integral water proofing compound complete all as specified and directed.

M&L cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, sides of ruonded or chamfered on edges of sunken floor complete all as specified and directed.

S&F 32mm dia GI pipe 450mm long beveled cut a both ends by making hole in wall sunken portion approx above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surfaces complete all as specified and directed.

Taking down steel water tubes of size 15mm bore and connection including cleaning for refixing or removal from site complete all as specified and directed.

Taking down steel water tubes of size 20mm bore and connection including cleaning for refixing or removal from store complete all as specified and directed.

S&F 15mm GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

All as per item No 23 above but 20mm bore complete all as specified and directed.

Supply & fixing in repairs bib tap cast copper alloy chromium plated fancy type with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule15mm bore complete all as specified and directed.

M&L cuting chases pining in making good to facing where required and pointing in cement mortar 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10cm but n.exc. 20cm girth complete all as specified and directed.

Supply & fixing in repairs chromium plated stop valve concealed type with long shank, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for unions suitable for size 15mm bore complete all as specified and directed.

S&F 15mm bore stop valve/angle valve cast copper alloy chromium plated fancy type screwed down, high pressure with crutch or butter fly handles fixed in repairs complete all as specified and directed.

Supply & fixing in repairs pillar tap cast copper alloy with capstan head, chromium plated,fancy type screwed down, high pressure with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

Supply & fixing PVC connection 15mm size 450mm long with PTMT nuts complete all as specified and directed.

S&F PVC valve less, syphonic action type low level flushing cistern of capacity 10 Ltrs with inlet, ball valve, float and handle and fixed to IWC on existing brackets, fixed in repairs complete all as specified and directed.

S&F in repair plastic water closet seat cover of white colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete as specified and directed.

S&F in replacement vitreous china wash down water closet pan (pedestal pattern) white with trap including connection to existing out joint pipe, flushing pipe or cistern, antisyphonage pipe, including making good to floor etc complete all as specified and directed.

S & F in repair vitreous china wash basin, white, flat back of size 550mm x 400mm fixed on existing brackets, including 32mm bore CP waste coupling, PVC waste pipe, inlet & outlet, chrimium plated PVC pipe etc. complete all as specified and directed.

Supply and fixing in repair chromium plated shower rose 125mm size with or without swivel joints including fixing to 15mm bore pipe complete all as specified and directed.

S & F in repairs ball Brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed 20mm dia complete all as specified and directed.

Supply & fixing in repairs stop valve cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for unions suitable for size 20mm bore complete all as specified and directed.

Supply & fixing in replacement vitreous China squatting pan 'Orissa' pattern of size 580mm x 440mm white with integral foot rests including lime concrete for fixing the trap and making connection to trap and flush pipe and making good the floor to existing specifications complete all as specified and directed.

Supply & fixing brass chromium plated tubular towel rail 20mm dia D-type, 60cm long between flanges complete all as specified and directed.

S&F in repair 32 mm bore PVC waste pipe complete all as specified and directed.

S&F in repair 40 mm bore PVC waste pipe complete all as specified and directed .

S&F in repair brass chromium plated jet for pedestal water closet including PVC flexible pipe alongwith complete necessary fittings complete all as specified and directed.

S&F PVC (SWR) floor trap of 75mm outlet plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug waste pipe washers including cantilever cast iron brackets connecting union etc overall size 915mmx460mm with bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F in repair rotational moulded polythylene water strarge tanks 1000 ltr (Cylinderical vertical with closed top ) triple layers hoisted and fixed in position incl dismantling existing tank complete all as specified and directed.

S&F in repair rotational moulded polythylene water strorage tanks 500 ltr (Cylinderical vertical with closed top ) triple layer hoisted and fixed in position including dismantling existing tank all as per specified in SSR Pt-1 complete all as specified and directed.

Disconnecting existing tanks of cap exc 500 ltrs & n.exc 1000 Ltrs, setting aside (or lower ing if required) for repairs, cleaning, etc. and hoisting if required re- connecting and re-fixing in position and cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes etc complete all as specified and directed.

Disconnecting existing water tanks, for repairs, cleaning and removing all scale and dirt etc from tanks, and from mouth of circulating pipes etc and reconnecting in same position of capacity exc 250 ltrs and not exc 500 ltrs each etc. complete all as specified and directed .

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe (minimum weight 15mm-90gms) complete all as specified and directed.

S&f in repair chromium plated grating 125mm dia circular and fixing with cement Concrete 1:2:4 on nahani trap or floor trap complete all as specified and directed.

S & F in repairs waste coupling PTMT 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed

All as per item No 52 above but 40mm dia complete all as specified and directed

S&F in repairs PVC kit for double action valveless syphonic action type low level flushing cistern with inlet, ball valve, float and handle fixed on existing cistern complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from steel or wooden frames or stone, concrete or brick surroundings; glazing with putty or fixed with beads complete all as specified and directed.

Supply & fixing, sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5sqm in each pane complete all as specified and directed.

Supply & fixing, figured glass 4mm thick pin headed type glazing with oil putty in square n. exc. 0.5sqm in each pane complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50sqm but not exceeding 4.00sqm each and removing from site complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

Supply and fixing factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

Supply and fixing pressed steel frame size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. Sheet thickness 1.25mm.

Supply and fixing 1.25mm thick pressed steel frame size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. Sheet thickness 1.25mm.

Supply & fixing, 35mm thick plain framed panelled shutters (two number of panels) of 2nd class hard wood with lock rail and panel inserts of 9mm thick BWP commercial ply, the size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. Type of wood as approved.

Supply & fix glazed and skeleton shutter, 35mm thick of 2nd class hard wood open rebated and prepared to receive glass, gauge etc., without sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members as specified in clause 8.24 (a) of MES Schedule (Part-I), and fitted to chowkhats complete all as specified & directed. Type of wood as approved.

M & L framed work as in door or gates of angle or other section with gusset plates, rails, braces etc conforming to Fe 410, Gde E-250 complete all as specified and directed.

Dismantling boarding, any description & fixed in any position complete all as specified and directed.

M&L Prelaminated particle board thickness 18/19mm, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M & L extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.

M&L mild steel work conforming to Fe-410-O or Fe-310-O as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, walkways, railing, framed work of water tanks and similar works complete all as specified and directed.

Supply & fixing in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supply & fixing 100mm long butt hinges mild steel medium weight cold rolled complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F aluminium handles anodised cast type 150mm long complete all as specified and directed.

Supply & fixing helical door spring mild steel 300mm, ordinary rat tail rod pattern including roller and roller plate welded to chowkats complete all as specified and directed.

S&F floor door stopper of aluminium of 140 mm alloy body and tongue, anodised, with hard drawn steel spring fixed in floor etc all as specified and directed.

S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

M&L preparing new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L preparing steel and iron surfaces (new) of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, zinc chromate primer complete all as specified and directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L rendering 12mm thick on brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick on in cement mortar (1:3) on ceiling/soffit of slabs finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick on brick work or concrete surface in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified and directed.

M&L preparing newly plastered or pointed surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L preparing newly plastered or pointed surface of wall and applying two coats of distemper oil emulsion over and including 3mm thick wall care putty complete all as specified and directed.

M&L prepration of newly plastered or pointed surface of walls and applying two coat of cement base paint complete all as specified and directed.

Supply & fixing in repairs 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to walls complete all as specified and directed.

Supply & fixing in repairs PVC (SWR) bend 110mm bore of any radius complete all as specified and directed.

Supply & fixing in repair curtain rod made out of 25mm dia (outer dia) pipe having thickness 0.63mm, PVC coated and colour / Pattern over all dia 28 to 29mm including taking down existing curtain rod complete all as specified and directed.

Supply & fixing in repair plastic finial of 28 to 29mm bore decorated type of any colour /Patern best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive complete all as specified and directed.

Supply & fixing in repair mild steel prepainting bracket to hold the curtain rod and fixed to wall (concrete /brick masonary) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the distrubed surfaces complete all as specified and directed.

Supply & fixing in repairs wall Mixer/basin mixer/sink mixer cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F in repair PVC bathroom cabinet mirror size 350mm x 450mm complete all as specified and directed.

S&F soap dish fixed to walls with chromium plated brass screws complete all as specified and directed.

Supply & fixing in repair glass self assembly with stainless steel frame Corner glass shelf etc complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack fixed in wall having overall size 600mm x 750mm x 250mm complete all as specified and directed.

S & F in repairs health faucet mild steel cromium plated suitable for 15 mm dia pipe 1.25 metre lomg flexible tube and ABS wall hook including making connections andfixed to in position etc complete all as specified and directed.

S& F in repair door seal including fixing with screws, complete all as directed (measurement done for each door) complete all as specified and directed.

S&F in replacement vitreous china one piece including connection to existing out joint pipe, including making good to floor etc complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thichness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L Granite slab 20 mm thick (table rubbed and polished) as in in steps, jambs,pillars, window-cill, cooking platform over and including 15 mm thick bedding layer in cement mortar (1:4) in and pointed with white or colour cement (1:2) using marble dust with admixture to match the shade of granite complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of cement base paint to walls after prepration complete all as specified and directed.

Taking down carefully point wiring of any type (ie on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittings & fixutres such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawal plug, screw etc including removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit fire proof, medium grade, ISI marked 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box / modular junction box, bell mouth, reducer, bend and flexible conduit etc including cutting chases in wall for laying of conduit and making good to all disturbed surfaces and matching the same with adjoining specifications with modular plate and shutter fixed with steel screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for one light point controlled by one switch SP one way.

All as per srl item No.108 here in before but for one fan point controlled by one switch and regulator complete all as specified and directed.

All as per srl item No. 108 here in before but for one bell point controlled by one bell push complete all as specified and directed.

All as per srl item No. 108 here in before but for one light point controlled by two way switches complete all as specified and directed.

All as per srl item No. 108 here in before but for one socket outlet 5 Amps on independent board complete all as specified and directed..

All as per srl item No. 108 here in before but for one socket outlet 5 Amps on same board controlled with other switch complete all as specified and directed.

All as per srl item No. 108 here in before but with 2.5 Sqmm (nominal area) FRLS cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed

M&L for point wiring with 1.5 Sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through existing surface/ concealed conduit and accessories and terminated in and including new sunk type pressed steel terminal switch boxes 1.6 mm thick with plastic laminated bakelite sheet top cover 3 mm thick make hylum fixed with nickel polished steel screws with washers and including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for one light point controlled by one switch SP one way.

All as per srl item No. 115 here in before but for one fan point controlled by one switch and regulator complete all as specified and directed.

All as per srl item No. 115 here in before but for one bell point controlled by one bell push complete all as specified and directed.

All as per srl item No. 115 here in before but for one socket outlet 5 Amps on same board controlled with other switch complete all as specified and directed.

All as per srl item No. 115 here in before but for one socket outlet 5 Amps on independent board complete all as specified and directed.

All as per srl item No. 115 here in before but one light point controlled by two way switches complete all as specified and directed.

All as per srl item No. 115 here in before but with 2.5 Sqmm copper (nominal area) FRLS cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm with stranded copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge.

S&F switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified.

S&F switch piano flush type, 5 Amps, 240 Volt AC single pole, two way complete all as specified.

S&F switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified.

S & F socket out let 5 Amp, 5 pin flush type complete all as specified and directed.

M&L Socket outlet multi purpose 3 in 1, 6 pin, 5 & 15 Amps, flush type complete all as specified.

S & F Bell push switch flush type 5 Amps, SP, 240 volts complete all as specified.

S&F Bell electric AC (Ding Dong) 240 volt SP complete all as specified and directed.

S & F for batton holder insulated body complete all as specified and directed.

Supply & fixing in repair LED retrofit lamp 10 W (TU) 6500K, 220-240v, B-22 base cap complete all as specified and directed.

S&F for ceiling rose surface type bakelite 65 x 50 mm three terminal complete all as specified and directed.

S&F five step fan regulator, electronic type, single phase, including connection complete after dismantling/ removing unserviceablve regulator all as specified.

S&F 18/20 watt LED (4 Ft) batten for surface pendent and conduit mounting high transmissitivity diffuser,high lumen complete with 20W LED tube rod (4ft) including taking down existing light fittings complete all as specified and directed.

S&F 10 watt decorative ultra slim square profile linear LED lighting fixture with extruded polycabonate environmental friendly enegy efficient including rod/tube and connection from ceiling rose to connector complete with all accessories internally pre-wired and including connecting up with twin/three core twisted flexible copper conductor cable with suitable size including taking down existing light fittings all as specified & directed.

S&F 5 watt decorative ultra slim square profile linear LED lighting fixture with extruded polycabonate environmental friendly enegy efficient including rod/tube and connection from ceiling rose to connector complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down existing light fittings all as specified & directed.

Supply & fixing LED 12/18W stellar pro round resses type down light PDC aluminium housig downlights corona series warm white color including taking down existing light fittings etc complete all as specified and directed.

Supply & fixing LED 12/18W stellar pro surface type down light PDC aluminium housig downlights corona series warm white color including taking down existing light fittings etc complete all as specified and directed.

S&F in repair energy saving bulk head luminaries with opal diffuse LED 10 watt 6000 K power factor more than 0.90 IP-65 class-I protection with high efficiency Led electronic driver, surge protection upto 2 KV, operative on 140 volts to 270 volts AC supply complete prewired products must be made in India only connection and testing complete all as specified and directed.

M&L Sub main wiring with PVC insulated cable copper conductor FRLS two single core 6 Sqmm drawn through Existing or new PVC rigid non metallic conduit including earth continuity FRLS copper conductor 6 Sqmm PVC insulated with green insulation complete all as specified and directed. Note : PVC conduit shall be measured and paid separately.

M&L Sub main wiring with PVC insulated cable copper conductor FRLS two single core 4 Sqmm drawn through Existing or new PVC rigid non metallic conduit including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified and directed. Note : PVC conduit shall be measured and paid separately.

M&L PVC rigid non metallic conduit fire proof medium grade ISI mark 25mm dia surface or concealed including conduit accessories such as tee, elbow ,bend junction box complete all as specified and directed. Note : Cutting chases shall be measured and paid for separately.

M&L cutting chases for concealed conduit wiring and making good in cement mortar 1:3 , cutting of girth suitable to accomodate 25 mm bore wiring conduit pipe including finishing of disturbed surfaces as per existing adjoining specifications complete all as specified and directed.

M & L in factory made Pantone 7541C shade powder coated distribution board 4 way TPN DB Double door with metal double door (IP-43 protection) fabricated of CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps bus bar, Neutral bar, Standard din rail,earth bar and cable ties for cable management, top and bottom removable gland plates with provn for MCB TPN and RCCB as incomer and 12 SP MCBs outgoing complete all as specified and conforming to IS :8623 along with cable end box for above DB.

M & L for replacement TPN MCB 16 to 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828 of 1996, IEC 60898 of 2002.

M & L for replacement TPN MCB 40 to 100 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828 of 1996, IEC 60898 of 2002.

M&L in factory made Pantone 7541C shade powder coated distribution board SP & N 12 way fabricated of CRCA sheet with metal door (IP-43 protection) bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as a incomer and 10 SP MCBs as outgoing complete all as specified and directed conforming to IS: 8623 along end box for above DB.

M&L in factory made Pantone 7541C shade powder coated distribution board SP & N 8 way fabricated of CRCA sheet with metal door (IP-43 protection) bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as a incomer and 6 SP MCBs as outgoing complete all as specified and directed conforming to IS: 8623 along end box for above DB.

All as per srl item No. 40 here-in-before but of size 4 ways complete all as specified and directed.Note for srl item 37,40,41& 42 :- MCB,s SPN & SP shall be measured and paid for separately.

M&L SP MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828 of 1996, IEC 60898 of 2002.

M&L Single Pole & Neutral MCB 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828 of 1996, IEC 60898 of 2002 .

Supply and laying insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 6 Sqmm 2 core complete all as specified and directed.

M&L for energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 35 watt LED for bldg security lights with high efficiency electronic driver BIS approved, having IP-65 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply 140 volts to 270 volts pre-wired complete all as specified and directed.

Supply only insulation LT tape size normal width 20mm Length 25 Mtr Thickness 0.125mm complete all as specified and directed.

S&F switch one Modular type with plate , 5 Amps, 240 Volt AC single pole, one way complete all as specified and directed.

S&F switch one Modular type with plate, 15 Amps, 240 Volt AC single pole, one way complete all as specified and directed.

M&L Socket 2 in 1 pin, 5 Amps,two Modular type with plate and shutter complete all as specified and directed.

M&L Socket 3 pin, 15 Amps,two Modular type with plate complete all as specified and directed.

S&F, Bell push switch two Modular type 5 Amps, SP, 240 volts complete all as specified and directed.

S&F Modular White cover plate with frame,12 module complete all as specified and directed.

S&F Modular White cover plate with frame,8 module complete all as specified and directed .

S&F Modular White cover plate with frame,6 module complete all as specified and directed.

S&F Modular White cover plate with frame,4 module complete all as specified and directed.

S&F Modular White cover plate with frame,3 module complete all as specified and directed .

S&F Modular Metal flush box 12 module complete all as specified and directed.

S&F Modular Metal flush box 8 module complete all as specified and directed.

S&F Modular Metal flush box 6 module complete all as specified and directed.

S&F Modular Metal flush box 4 module complete all as specified and directed.

S&F Modular Metal flush box 3 module complete all as specified and directed

Supply and fix sheet metal enclosure with socket plug top and SPN MCB 20Amp , 10kA, 50 Hz and enclosure with a two pin and earth plug and socket complete all as specified and directed.

M& L for earthing complete with & including galvanized MS earth plate of size 600 x 600 x 6 mm thick, buried vertically in ground to a depth not less than 2.25 metre below ground level, with lop edge of earth plate not less than 1.5 below ground level connected to galvanized earth wire soldered and riveted or connected to earth plate by means of nuts, bolts , check nuts & washers, of galvanized iron or steel all as Shown in electrical plate No. 3 of MES SSR Part- I (2009) and connected to panel board, all as specified and testing on completion including provn of earth wire 4 mmm dia duly protected with and including 15 mm dia bore medium grade GI pipe upto 7.5 (maximum) meter from electrode to earth point including provn of the earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate and GI light grade watering pipe of 20mm dia bore with funnel with wire mesh including all necessary excavation & earth work in any type of soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC 1:3:6 type C-1 as in earth chamber, 50 mm thick RCC cover using cementconcrete 1:2:4 type B-0 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work and MS frame using MS angle of size 40mm x 40mm x 6mm complete all as specified & directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to the department.

JAI DURGA CONSTRUCTION COMPANY (BID ID -3119302)