Kerala

AOC

Works

Civil Works - Buildings

GENERAL-Arts College Economics and Commerce Block-Plaster Repairs and Maintenance-General Civil Work

Public Works Department

Thirunananthapuram | Thiruvananthapuram, Kerala

Amount: ₹7.4 LCloses: 30 Aug 2025Closed

Timeline

Published21 Aug 2025
Closed30 Aug 2025
Awarded15 Nov 2025

Bids

Item Rate

1 Bid15 Nov 2025

#	Company	Amount	Rank	Status
1	SURESH KUMAR.M L1₹7.3 LAccepted-AOC	₹7.3 L	L1	Accepted-AOC The selected contractor has executed agreement

BoQ Comparative

Line Items (18)

Sl No	Description	Qty	Unit	SURESH KUMAR.M L1
1.00Civil Works
1.00	15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.	9	cum	3,715 ₹33,435 Lowest
1.00	13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)	159.75	sqm	458 ₹73,165.5 Lowest
1.00	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	1,408.56	kg	233 ₹3,28,194.48 Lowest
1.00	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	150	sqm	852 ₹1,27,800 Lowest
1.00	15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.	108	sqm	57 ₹6,156 Lowest
1.01	26.29.1:Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter	100	metre	8 ₹800 Lowest
1.01	26.29.2:Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars above 12 mm diameter	100	metre	16 ₹1,600 Lowest
1.01	26.30.1:Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.Upto and including 12mm dia.	25	holes	154 ₹3,850 Lowest
1.01	5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more	64.15	kg	113 ₹7,248.95 Lowest

Tender Value

₹7.4 L

EMD Value

₹18,490

Closing Date

30 Aug 2025, 11:00 amClosed

Tender Inviting Organisation

Name

Assistant Executive Engineer

Address

O/o the Assistant Executive Engineer, PWD Buildings Sub division, PMG, Thiruvananthapuram

Work Description

GENERAL-Arts College Economics and Commerce Block-Plaster Repairs and Maintenance-General Civil Work

Tender Information

Tender ID

2025_PWD_789299_1

Reference Number

PWD/BLDG/TR/14921/2025_5_1_1/1

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

120 days

Location

Thirunananthapuram

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical/Finance

RequiredTender Schedule (.xls)

RequiredPreliminary Agreement and Affidavit (.pdf)

RequiredAttested copy of License (.pdf)

RequiredEMD exemption documents (If any) (.pdf)

RequiredForm of tender (.pdf)

RequiredIntegrity pact (.pdf)

RequiredStandard Bid Document (.pdf)

RequiredG S T Document (.pdf)

RequiredDeclaration and e-payment form (.pdf)

Fee & Financial Details

Tender Fee Amount

₹1,635

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹18,490

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

15 Nov 2025

Published

21 Aug 2025

Bid Opening

1 Sept 2025

Download Starts

21 Aug 2025

Download Ends

30 Aug 2025

Submission Starts

21 Aug 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

SURESH KUMAR.M

L1₹7.3 LAccepted-AOC

Sl No	Description	Qty	Unit	SURESH KUMAR.M L1
1.00Civil Works
1.00	15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.	9	cum	3,715 ₹33,435 Lowest
1.00	13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)	159.75	sqm	458 ₹73,165.5 Lowest
1.00	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	1,408.56	kg	233 ₹3,28,194.48 Lowest
1.00	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	150	sqm	852 ₹1,27,800 Lowest
1.00	15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.	108	sqm	57 ₹6,156 Lowest
1.01	26.29.1:Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter	100	metre	8 ₹800 Lowest
1.01	26.29.2:Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars above 12 mm diameter	100	metre	16 ₹1,600 Lowest
1.01	26.30.1:Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.Upto and including 12mm dia.	25	holes	154 ₹3,850 Lowest
1.01	5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more	64.15	kg	113 ₹7,248.95 Lowest

Sl No

Description

Qty

Unit

SURESH KUMAR.M

1.00Civil Works

1.00

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

cum

3,715

₹33,435

Lowest

1.00

13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)

159.75

sqm

458

₹73,165.5

Lowest

1.00

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

1,408.56

233

₹3,28,194.48

Lowest

1.00

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

150

sqm

852

₹1,27,800

Lowest

1.00

15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

108

sqm

₹6,156

Lowest

1.01

26.29.1:Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter

100

metre

₹800

Lowest

1.01

26.29.2:Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars above 12 mm diameter

100

metre

₹1,600

Lowest

1.01

26.30.1:Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.Upto and including 12mm dia.

holes

154

₹3,850

Lowest

1.01

5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

64.15

113

₹7,248.95

Lowest