MODIFICATION OF TOILET IN CONFERENCE HALL

Dismantling and removing existing dadoing/ floor tiles, cement mortar etc. in lines and level upto the required level, disposal of debrices at places pointed out anywhere within the company premises as per the direction of engineer in charge.

Plain cement concrete work 1:2:4 mix using 20 mm nominal size hard granite broken stones including charges for mixing concrete, necessary form work,laying, consolidating, curing, etc. complete for foundation levelling course .etc

Providing and laying 8 mm thick or nearest size first class light colured vitrified glazed tiles for walls of size 120x60 cm (Johnson, somany, khajaria or equivalant make) over special adhesive (cerabond, Ramco, khajaria or equivalent make) including pointing the joints with matching colour epoxy, levels for daoding, etc.complete

Providing and laying 9 mm thick or nearest size matt finished vitrified tile(Anti-skid) of size 600x600 mm having water absorption less than 0.5% laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & pattern, pointing the joints with matching colour epoxy,finishing neat to lines and level etc. complete.

Providing and fixing false ceiling at all heights with 6mm integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 600 x 600 mm or nearest size of approved texture, design and patterns over inter locking aluminium ceiling grids with 25x25x1. 5mm anodized aluminium angles or equivalent sections fixed alround walls at the required height for false ceiling using rawal plugs, screws etc. 36x25x1.5mm anodized aluminium main tees or equivalent sections 600 mm intervals suspended from the roof truss work at required length and adjustable 6mm suspension rod, holding nuts, washers etc. 25x25x1.5mm Tees interlocked to this main Tees at bottom part including providing necessary frame work for tube light fittings etc. complete as per the direction including painting with two coats of plastic emulsion paint including 1 coat of cement primer to all faces of the tiles. No deductions shall be made for light points.

Cement Concrete Solid Block Masonary Work In C M 1:6 using solid cement concrete blocks (As Per IS 2185) of approximate size 300 x 200 x 150 mm for superstucture walls, compound walls etc. including curing.

Plastering with cement mortar 1:4, for an average thickness of 12 mm, one coat, floated hard and trowelled smooth at all levels to fair faces of brick masonry, etc.

Painting with synthetic enamel paint two coats of approved quality and colour to new / old surfaces of structural steel works doors, windows of steel / wood etc.after rubbing with sand paper and cleaning well the surfaces including cost of all labour,materials and scaffolding etc.at all heights.

Supplying and fixing 15mm or nearest size quarter turn CP BRASS LONG BODY taps of premium quality and brand of Jaguar or approved quality and make.

Supplying and fixing quarter turn long body cp brass pillar taps / piller cock of premium quality of Jaguar or approved make matching to the design of counter top wash basin including making required provision on counter top / fixing to wash basin, including all the accessories etc. complete.

Providing and fixing one piece, floor mounted, European type water closet (western commode) white vitreous china / ceramic, sleek stright line, fully covered square / D shaped design, 715x335x715 mm or nearest available size, double trap, rimless, syphonic flushing, approved colour, brand / make (Cera, Paryware,Hindware or equivalent make), shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, soft close seat cover, all fittings and fixtures, nuts, bolts and gasket etc including making connection with the existing S trap, after removing the existing closet, cutting and removing the floors as required in neat lines, making the existing soil line good for installing the new water closet, complete in all respect as per direct ions of Engineer-in-Charge.

Supplying and laying 110 mm dia PVC pipes of approved make for soil pipe including cost of all specials such as bends, door bends, making connection to the closet and septic tank etc. cost of all labour and materials.

Supplying, laying, jointing & hydrostatically testing ISI marked PVC pipes 63mm OD(10 Kg/cm2) conforming to IS 4985 and all required PVC specials such as tees, bends, elbows,unions, reducers, adapters, coupling etc., as per IS 7834 or IS 10124 for internal waterlines as per the direction of engineer in charge.

Supplying, laying, jointing & hydrostatically testing ISI marked PVC pipes 25mm OD(10 Kg/cm2) conforming to IS 4985 and all required PVC specials such as tees, bends, elbows,unions, reducers, adapters, coupling etc., as per IS 7834 or IS 10124 or internal waterlines as per the direction of engineer in charge.

Supplying, threading / laying and jointing PVC pipe 20 mm outer dia pipes 10kg/cm2 conforming to IS 4985 for internal waterlines with all required pvc specials, such as tees, bends, elbows,unions, reducers, etc. With clamps including cutting masonry wall or concrete floors, sunshades, etc and finishing neat with cement plaster, wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and making connection the existing line, etc. complete.

Supplying and laying 32 mm dia PVC pipes (10kg/cm2 pressure pipes.) of approved quality for water line including cost of all fittings.

Supplying and fixing tile insert shower drain chanel (8 x 8 inches) with SS trap of premium quality including removing the existing and finishing the floors neatly as per the satisfaction of engineer in charge,

Supply & fix PVC floor trap 100mm dia. of approved quality.including making connection to the drain line using 2" dia pvc pipe etc.

Supplying and fixing cp brass health faucet of approved shade/ Brand with angle cock of premium quality with cp braided flexible pipe 1m long, wall hooked ,making conncetion to water line,etc. complete

Supplying 560mm X 860 mm or nearest size beveled edge coppered back mirror of premium quality superior make 5mm thick glass micro, square /oval / circular shape with double coat silver plating, including all accessories.

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing frame / bolts with in the position in template, plastering the inside outside area, in neat lines and levels etc. complete as per direction of Engineer-in-charge.

Providing and fixing powder coated aluminium frame work for ventilators. Openable type ventilators using powder coated aluminium medium guage sections for outerframe, shutter frame approved quality and sections (jindal or equivalent make). Shutter frame shall be single or multi panelled with 4mm thick frosted glass. Including fixing in position, cost of necessary hardwares like screws, rubber beading (EDPM), PVC latch, Detachable hinges, hooks, labour, scaffolding etc. Complete at all heights including dismantling and removing the old ventilators, finishing the surface with cement plastering and matching colour wall paint etc. Complete as per direction of Engineer-in- charge.

Providing and fixing C.P Toilet paper roll holder of premium quality with all accessories as required and making good the walls wherever required.

Supplying and fixing approved quality C.P Towel Ring (Square or open rod) of premium quality with brackets and making good the walls wherever required.

Providing and fixing cantilever (wall mounted) wash basin counter cabin with shutter made of 16mm thick wpc board with 1mm thick laminate finish of approved shade / colour, including fixing of 0.1mm thick laminate on back side, providing necessary soft close Hinges, 2mm edge banding, 100mm s.s handles. fixing in positions with necessary screws, factory made by hydraullic pressing machine, edge banding etc. complete as per the direction of engineer in charge. ( measurment will be given for elavation area)

Supplying and fixing wash basins with 500 x 350 x 110 mm or nearest size premium thin rim table top wash basin of approved quality /brand/ make with 1 no. 32 mm CP Brass waste coupling of standard pattern, 32mm PVC Waste pipe including cutting and making good the counter top slab etc. complete.

Supplying and fixing white glazed vitreous china flat back lipped front urinal of size 430 x 350 x230mm or nearest size( Indian make premium quality) with 1 no.15mm PVC heavy type connection with CP learning nut and 1 no. 15mm CP regulating valve of superior make, fixing the urinal to wall with necessary wooden plugs & iron screws including cutting and making good the walls etc. complete.

Supplying and fixing Urinal Valve- auto closing concealed flush valve with wall flange including necessary wooden plugs & iron screws, cutting and making good the walls etc. complete.

Providing and fixing openable door with 16mm thick WPC board with 1mm thick laminate finish of approved shade/colour including profile handle, necessary hardware fittings of approved make.( measurment will be given for elevation area)

Providing and fixing built in shelf with openable door of 16mm thick WPC board with 1mm thick laminate finish of approved shade/colour including profile handle, providing racks, necessary hardware fittings of approved make etc. complete.

Providing counter top with 15- 20mm thick nano white granite of approved colour or shade including cutting and finishing with neat surface

Supplying and fixing rectangluar shaped glass partition with frosted glass 8mm thick with chrome finish of size 450 X 900mm for basin/ urinal including cost of all material and labour etc. complete

P T KRISHNAN ENGINEERING CONTRACTOR