Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.4 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹46.5 L+₹11.0 L (31.1%)Rejected-Finance 60 B C BAZAR AMBALA CANTT HARYANA 133001 | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance Rejected being |
| Sl No | Description | Qty | Unit | M/s R.K.Jain L2 | Ridhi Enterprises L1 |
|---|---|---|---|---|---|
| 1.00 | Material and labour for 10 mm thick rendering or plastering using polymer modified ready mix plaster of fine grade Portland cement, graded sand and polymer with water soluble additives as per manufacture's specifications of approved make, on any faces of brick work or concrete ceiling or chajja surfaces and finished even and smooth without using extra cement, complete, all as specified and as directed by the Engineer–in charge.
Make:- Smart care ready mix plaster of Asian paint or equivalent in Berger/Ultra tech/Pidilite | 50 | Sqm | 325 ₹16,250 | 300 ₹15,000 Lowest |
| 2.00 | Dismantling reinforced cement concrete as in suspended slabs, beams, lintels etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition) complete, all as specified and as directed by the Engineer-in-Charge. | 1 | Cum | 125 ₹125 Lowest | 200 ₹200 |
| 3.00 | Material and labour for providing reinforced cement concrete M-25 (design mix) using 20mm graded crushed stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete, all as specified and as directed by the Engineer-in-Charge. | 1 | Cum | 6,300 ₹6,300 | 3,500 ₹3,500 Lowest |
| 4.00 | Material and labour for TMT steel bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia complete, all as specified and as directed by the Engineer-in-Charge. | 100 | Kg | 75 ₹7,500 Lowest | 88 ₹8,800 |
| 5.00 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key scrubbing down with water, etc. complete, all as specified and as directed by the Engineer-in-Charge | 2,560 | Sqm | 5 ₹12,800 Lowest | 14 ₹35,840 |
| 6.00 | Material and labour for rendering 15 mm thick on brick work or concrete wall surfaces in patches( Area of each patch not exceeding 2.00 sqm), any height, in cement mortar 1:4 and finished the surface even and smooth without using extra cement complete, all as specified and as directed by the Engineer-in-Charge. | 500 | Sqm | 150 ₹75,000 Lowest | 160 ₹80,000 |
| 7.00 | Material and labour for 15 mm thick rendering or plastering using polymer modified ready mix plaster of fine grade Portland cement, graded sand and polymer with water soluble additives as per manufacture's specifications of approved make, on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement, complete, all as specified and as directed by the Engineer–in charge.
Make:- Smart care ready mix plaster of Asian paint or equivalent in Berger/Ultra tech/Pidilite | 1,200 | Sqm | 345 ₹4,14,000 | 300 ₹3,60,000 Lowest |
| 8.00 | Material and labour for 05 mm thick rendering or plastering using polymer modified ready mix plaster of fine grade Portland cement, graded sand and polymer with water soluble additives as per manufacture's specifications of approved make, on any faces of concrete ceiling or chajja surfaces and finished even and smooth without using extra cement, complete, all as specified and as directed by the Engineer–in charge.
Make:- Smart care ready mix plaster of Asian paint or equivalent in Berger/Ultra tech/Pidilite | 100 | Sqm | 270 ₹27,000 Lowest | 300 ₹30,000 |
| 9.00 | Material and labour for rough cast plaster complete as specified in SSR Part-I, clause 14.22 shall consisting of following:- firstly apply under coat in cement mortar 1:4 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine stone aggregate of size between 6 to 12 mm as per the texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied, complete, all as specified and as directed by the Engineer-in-Charge. | 800 | Sqm | 165 ₹1,32,000 Lowest | 170 ₹1,36,000 |
| 10.00 | Material and labour for preparation of new plastered/unplastered surfaces of walls, etc. and applying two coats of cement base paint over a coat chalk whiting complete, all as specified and as directed by the Engineer-in-Charge. | 1,200 | Sqm | 15 ₹18,000 Lowest | 18 ₹21,600 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
18 Sept 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (N) AMBALA CANTT
GE (N) AMBALA CANTT
CA NO GE(N)AMB-33/2025-26 PERIODICAL SERVICES TO OTM ACCN V TO X SECTOR B OF AGE B/R-I (NORTH) UNDER GE (N) AMBALA CANTT
2025_MES_727098_1
GE(N)/AMB-33/2025-26
Open Tender
Civil Works
Item Rate
330 days
GE (N) AMBALA CANTT
As per tender document
9 documents required · 9 mandatory
₹500
GE (N) AMBALA CANTT
₹90,000
Yes
30 Oct 2025
21 Aug 2025
20 Sept 2025
21 Aug 2025
18 Sept 2025
4 Sept 2025
21 Aug 2025 - 4 Sept 2025
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .