Loading
Loading…
Loading…
Tender Value
₹79.3 L
EMD Value
₹1.6 L
Closing Date
31 Aug 2026, 11:00 am7d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
+ Capital Works)
TM
14 conditions · 2 needing a document upload
Financial : The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (For details refer Para 10.2 /Part-I of GCC April-2022.)
Eligibility Criteria : Technical : The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. (For details refer Para 10.1/Part-I of GCC April 2022).
Similar nature work - OEM of concerned Track Machine or its authorized representative, OR, POH/IOH/Major repair of track machine including Electrical, Mechanical, Hydraulic works and commissioning of Machine.
4 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
As per 'Instructions to Bidders (ITB)' given in tender document & GCC April-2022 (Section-1 of Tender Document) .
Periodic cum major overhauling (POH) of T-28 portals (01 & 02) and (09 & 10) in SECR.
SECR-TM-POH-T28-2026-04A~SECR
SECR-TM-POH-T28-2026-04A
Open
Works - General
12 Months
Bilaspur, Chhattisgarh
₹0
₹1.6 L
7 Aug 2026
7 Aug 2026
17 Aug 2026
19 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 79,29,694.4 | ||
| — | 8.00 | — | — | ||
| Reconditioning of horizontal tubes :- Scope of work includes dismantling of horizontal tubes, cleaning, pre-grinding, surface preparation or depositing of metal by welding till the permissible clearance of 1 to 3 mm on both sides top and bottom of horizontal beam would be achieved, then further grind the weld surface till free movement of horizontal beam inside the tube. L & T 2B electordes would be used to perform the job in T-28 portal . Manpower, tools, materials and equipments at workshop will be provided by contractor. | — | — | — | 21,90,080 | |
| — | 8.00 | — | — | ||
| Reconditioning of vertical tubes :- Scope of work involves grinding, rubbing & finishing of the inside and outside surface of the reciprocating parts of the vertical columns Hardox plate or equivalent plate of required size will be welded inside and outside surface of the reciprocating parts of the vertical columns in T-28 portal. | — | — | — | 18,88,000 | |
| — | 1.00 | — | — | ||
| Reconditioning of Vertical Inner Column Twist Issues (Portal 9 RHS): - Repair the twisted part of the beam by cutting, welding & grinding. | — | — | — | 1,13,280 | |
| — | 4.00 | — | — | ||
| Rewiring of entire electrical system :- The scope of work shall include dismantling/removal of all faulty wiring circuits and defective electrical equipment/accessories, followed by complete rewiring of the electrical system using new electrical cables and associated components. The contractor shall arrange supply, installation, testing, and commissioning of all required electrical accessories/items i.e. electrical wires, fuses, emergency stop switches, pressure gauges, sleeves, working/cabin light assemblies with bulbs, terminal relays, switches, relay adaptors, horn, RPM meter, hour/cover meter, panel lights, connectors, external tubing, etc. Make/brands: for Electrical Cables: Lapp / Polycab/ RR cable, for Gauges: VDO / Bricol / Veethree, for Switches: Schneider / Haulotte Star, for24 Volt Relays: BOSCH, for Lights: Philips / Sigma / Hella & for Time Relays: OMRON / TRDUZEP. | — | — | — | 9,81,854.4 | |
| — | 4.00 | — | — | ||
| Diesel tank changing:- Scope of work includes removing the rusted diesel tank and install new disel tank. | — | — | — | 2,26,560 | |
| — | 4.00 | — | — | ||
| Reconditioning of working cabin and ladder :- Scope of work of reconditioning of cabin with new visible glasses and supply and installation of new ladders ( 04 Nos) in T-28 portal. | — | — | — | 3,58,720 | |
| — | 4.00 | — | — | ||
| Reconditioning of rail wheel mounting plates :- Scope of work reconditioning of rail wheel mounting plates ( 08 Nos) and replacement of motor engage gear crown & pinion, replacement of bearings, pins and WRI 215 seal set in T-28 portal, if required. | — | — | — | 94,400 | |
| — | 4.00 | — | — | ||
| Painting and denting work of T-28 machines :- Washing/degreasing with water, caustic soda and diesel etc,/de-rusting and reshaping the Deformed structural parts applying two coat of zinc based yellow primer two coats of PU paint or synthetic enamel of yellow colour of Berger make or equivalent. | — | — | — | 6,60,800 | |
| — | 4.00 | — | — | ||
| Labour charges :- Labour charges for complete job for POH of T-28 portal. | — | — | — | 14,16,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TD-POH-T-28.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
GCC-2022-ACS10_merged.pdf GCC April 2022 updated up to ACS10
ATTACHMENT
GCC-2022-ACS10_merged.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].