Loading
Loading…
Loading…
Tender Value
₹1.0 Cr
EMD Value
₹2.0 L
Closing Date
30 Mar 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ELECT G
15 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar nature of work for minimum eligibility criteria is as under:- "Supply, Erection, testing and commissioning of water pumping installation or Repair or maintenance of different pumps having capacity 15000 GPH or more or AMC of different pumps having capacity 15000 GPH or more or Supply, erection testing and commissioning of LT/HT panels. ." (Ref. CEGE/ECR/HJP's letter no. ECR/ELE/G/Similar nature/2480 dtd. 5.06.2020)
3 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1. I/We have visited the works site and I/We am/are aware of the site conditions. 2. We have read the tender Notice[NIT] details, Tender document along with all the conditions attached/referred to, in this tender document, and agree to abide by the said conditions. 3. We are aware of the fact that the railway reserves the right to amend the scope and value of the contract and to reject[or accept] this offer without assigning any financial liability.
Electrical work in connection with (A)Replacement of old PS Tank & CI Tank at various colonies of DHN Division(B) Replacement of old PS Tank & CI Tank at NUQ, DXN, GMX, GHD, RAY, GMO, PNME, CRP, PEH, MGME & GMIA Stations of DHN Division
EL-53-OPEN-2025-26
EL-53-OPEN-2025-26
Open
Works - General
12 Months
Dhanbad, Jharkhand
₹0
₹2.0 L
30 Mar 2026
5 Mar 2026
16 Mar 2026
64 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 41,81,336.94 | ||
| — | 8.00 | — | — | ||
| Provision (Supply and erection) of Earthing station (RI-7021) as per Drg.No. ETI/ OHE/P/ 7020 or latest (The price shall cover supply and erection of an earth electrode (RI 7021) as per drawing no. ETI/OHE/P/7020. The price shall also cover the provision of a protective concrete Box with removable MS cover. The material should confirm to ACTM vol. II Part II Para 7.1.1 with figure A 3.01. The price shall cover the testing of earth value and painting the value on the earth pit. The earth electrode shall normally be of mild steel galvanized perforated pipe of not less than 44 mm nominal bore and about 3 meter length provided with a spike at one end and welded lug suitable for connecting directly Earth wire/MS flat of required size at other end. The connection of Earth wire/M S flats to each electrode shall be made through M S links by bolted joints, fasteners to be supplied by the contractor. The earth surrounding the electrode shall be chemically treated by alternate layers of fine charcoal and salt at least 150 mm all around. The item should be procured from approved supplier of CORE or RDSO, duly inspected by either RITES or Railway Representative deputed by Sr. Div. Elect.Engineer (G)/ Dhanbad.) | — | — | — | 23,474.8 | |
| — | 2.00 | — | — | ||
| Installation, testing and commissioning & Supply of Horizontal split casing pump (HS Pump), Model: DSM 65 / 32, along with 22 KW motor, Base frame, coupling, coupling guard, foundation nuts & bolts, double stage, size: 80 mm x 65 mm, Speed: 1450 RPM, 70 Mtrs. Head, Discharge: 46 M3/Hr. (10000 GPH), Efficiency: 55%, Sp. Gravity: 1. 0, BKW at Shaft: 15. 88 KW, REC Motor: 22 KW/30HP, NPSHR/margin: 3. 06m//0. 50m (Note: Motor is TEFC, 3- Phase, Squirrel cage, suitable for voltage: 415 V + 10%, Frequency: 50 HZ + 5%, Continuous Rating ((SI Duty) with class 'F' insulation suitable for ambient Temp: 50 degree Cent (temp. rise limited to Class 'B' ) and altitude of up to 1000 M above MSL. Motors conform to IS- 325 and IS- 12615 with efficiency level IEI and provided with enclosure protection class- IP 55 ( Acceptable Make: Kirloskar or similar)Installation of the Pump set includes minor Civil works for foundation, grouting, fixing of base plate, leveling & alignment etc. | — | — | — | 3,80,900 | |
| — | 2.00 | — | — | ||
| Installation, testing and commissioning & supply of HS Pump motor set 15000 GPH x 250 ft. head, 1- stage, Impeller CHS-210 FG 260, Shaft-CSIS- 1570 hot-RLD 40C8- tem (Deg-C) Ambient capacity 68. 19M3/Hr NPSHR Flooded efficiency -58%, Motor Rating: 30 KW nominal RPM- 1470, horizontal foot mounted TEFC sq. cage induction motor with class '1' insulation SI duty, & IP- 55 protection IS- 325, Power supply: 415V + 10%, 50 HZ + 5%, 3- Phase, AC (Make: Kirloskar, KSB, Beacon, Grundfos)Installation of the Pump set includes minor Civil works for foundation, grouting, fixing of base plate, leveling & alignment etc. | — | — | — | 5,02,414.18 | |
| — | 6.00 | — | — | ||
| — | 3.00 | — | — | ||
| — | — | — | 1,82,969.01 | ||
| — | 2.00 | — | — | ||
| Installation, testing ,commissioning & Supply of 20HP Automatic Star/Delta starter with (1)Pump protection relay(C & S mpro-200@45<45@E) (2)Programmable time switch(Automatic ON/OFF purpose) (3)LVM with SPP and phase Seq. complete with other electrical accessories e.g voltmeter(0-500V), Ammeter(0-50A),selector switches etc. including wiring. (Make- L&T, Siemens, C&S) | — | — | — | 88,992.14 | |
| — | 5.00 | — | — | ||
| Installation, testing ,commissioning and Supply of Fully Automatic star delta starter capacity 90 HP 415 V AC with all p[rotection containing Havells make 125 A or similar contactor O/L Relay ramnge 40-60A switch 200A singfle phase preventor under voltage release Minilec make ammeter, voltmeter selector switch for both ON/OFF push button LED indication lamp including wiring and suitable Busher complete panel (Make- L&T, Siemens, C&S) | — | — | — | 2,14,486.55 | |
| — | 4.00 | — | — | ||
| Installation, testing ,commissioning and Supply of Fully Automatic Star Delta Starter 75 HP, Relay Range 66-110 Amp for Motor Rating AC-3 Duty, 415V, 50Hz, 3-phase, in Sheet enclousere, with all protection like under voltage single phasing suitable copper busbar, ammeter, voltmeter 0-500V on/off, push button, LED indication RYB- TPN switch with internal wiring complete set (Make- L&T, Siemens, C&S) | — | — | — | 2,40,100.24 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril-2022_1.pdf
ATTACHMENT
GCCCorrectionslip1to10.pdf
ATTACHMENT
Tender Document
ATTACHMENT
TenderDoc-EL-53-2025-262.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .