PROPOSED WORK FOR CONSTRUCTION OF CHILDREN TRAFFIC PARK IN AKWADA(DRAFT) TPS NO.29 FP NO.59/4/3 FOR BHAVNAGAR MUNICIPAL CORPORATION, BHAVNAGAR.

NAME OF WORK :- PROPOSED WORK FOR CONSTRUCTION OF CHILDREN TRAFFIC PARK IN AKWADA (DRAFT) TPS NO.29 FP NO.

59/4/3 FOR BHAVNAGAR MUNCIPAL CORPORATION, BHAVNAGAR.

BHAVNAGAR MUNICIPAL CORPORATION

BUILDING DEPARTMENT

It No. Description Qty. Unit TOT.RATE Amount

Excavation for foundation upto 1.5 m depth including sorting out

1.00 and stacking of useful materials and disposing off the excavated 724.69 CUM 125.85

stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0m including

2.00 sorting out and stacking of useful materials and disposing off the 57.88 CUM 138.04

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and

getting out the soil and disposal of the surplus excavated soil as 1561.18

directed within a lead of 50 Meter for following diameter of

pipes.(iii) 300 mm

(ii) Uncoursed Rubble Masonry with hard stone of approved

4.00 quality in foundations and plinth in Cement Mortar 1:5 (1-cement : 407.63 CUM 2635.14

5-coarse sand including levelling up etc. complete

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not 137.47

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

Providing Supplying and laying Filling in foundation, plinth, trench

and uneven area of plot (for levelling and maintianing slop) with

6.00 murrum or selected soil in layers of 20 cm. Thickness. Including 5420.25 CUM 304.59

levelling, watering, ramming and consolidating etc.As dirceted

Providing Supplying and laying fine sand(PANO) (approved

7.00 quality of surendranagar bhogavo river) for sandpit as directed 272.25 CUM 429.25

Providing and laying ordinary cement concrete M-150 and curing

complete including the cost of form work but excluding the cost

of reinforcement for reinforced concrete work in Bases of Flooring

and the like and Mass concrete. For PCC

Providing laying Controled Reinforced cement concrete M- 25 using

minimum Cement content @ 450 kg/Cmt including curing etc

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in concrete road Coarse

and fine aggregate confirming to IS:383 maximum size of coarse

aggregate not exceeding 25 mm, using mechanical weigh batcher,

mixed as per approved mix design, laid, placed & distributed with

sufficient man power using M.S. Side Rail of road thickness with

9.00 necessary nut bolt plates, fixing as per width, compacted with Poker 185.00 CUM 5555

vibrator V.D. system ( Trimix ) & Surface Plate Vibrator, Troweling to

be carried out with the same machine running on troweling blades,

finished in a continuous operation including provision of contraction,

expansion, construction and longitudinal joints, joint filler separation

membrane, sealant primer, joint sealant debonding strip, dowel bar,

tie rod, Surface Hardner must be spread on final concrete surface to

harden the top surface, admixtures as approved, curing compound,

finishing to lines and grades including form work.

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in : (a) Foundations,

footings Bases of columns and raft slab

Providing and laying controlled cement concrete M-200 for R.C.C.

11.00 bored piles including ramming, vibrating, curing and finishing 58.38 CUM 4685.49

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars, posts

and struts for columns UP TO GROUND FLOOR

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars, posts

and struts for FIRST FLOOR

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Beams, girders and

cantilever up to floor For GROUND FLOOR

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Beams, girders and

cantilever up to floor For FIRST FLOOR

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in COPING/LINTEL FOR

ALL FLOOR ABOVE FLOOR TWO LEVEL

Providing and Laying Controlled Cement Concrete M-250 and curing

etc. Complete including the cost of form work and excluding the cost

of reinforcement etc complete in R.C.C.slabs for all thickness for up

to ABOVE FLOOR TWO LEVEL FOR GF.

Providing and Laying Controlled Cement Concrete M-250 and curing

etc. Complete including the cost of form work and excluding the cost

of reinforcement etc complete in R.C.C.slabs for all thickness for up

to ABOVE FLOOR TWO LEVEL FOR FF.

REINFORCED CEMENT CONCRETE: Providing and laying machine

mixed, machine vibrated, watertight controlled reinforced cement

concrete M-250 grade. Using 20 mm and smaller size machine

crushed black trap metal aggregate (of approved size) and well

sieved silt-free river sand in all types and size of structures as shown

in drawings including water stopper between RCC wall, watering

placing (pouring), necessary scaffolding, hoisting, leaving pockets for

pipe flanges, sockets etc.as directed and keeping drip moulds,

grooves, including curing, testing, haking, as per direction complete.

Note: (1) RATES OF REINFORCED CEMENT CONCRETE WORK SHALL

BE INCLUSIVE OF SHUTTERING, CENTERING BUT EXCLUSIVE OF STEEL

REINFORCEMENT FOR VERTICAL FINN/RCC PADDI.

Providing TMT Bar FE 500 D reinforcement for R.C.C. work including

20.00 bending, binding and placing in position complete upto floor two 72713.28 KG 77.28

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B) Conventional for

ground floor (BRICK MASONARY) FOR PLINTH AND GF LEVEL

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B) Conventional for

FOURTH floor & TERRACE floor.

Half brick masonry in common brunt clay building strength not less

than 35 Kg./Sqcm. In cement mortar 1:3 (1cement : 3 coarse sand)

23.00 with 2 Nos. of 6 mm. Diameter mild steel round bars after every 92.91 SQM 704.14

three coarse embedded in cement mortar for all floor up to floor two

Masonary work using Aerated light weight concrete block having

crushing strength not less than 35 kg/sqcm for super structure above

plinth level upto all floor two level in cement mortar 1:5 ( 1 cement :

5 fine sand ) complete as per Technical Specification

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement mortar

1:3 (1-cement:3-sand)finished with trowel including scaffolding

curing etc. comp.For all floor above floor two level ceilings & soffits

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

26.00 floor two level and finished even and smooth in (i) Cement mortar 3449.86 SQM 200.08

1:3 (1- Cement:3- sand) finished with trowel including scaffolding

curing etc. comp.For all floor above floor two level walls

20 mm thick SAND/GUTKA faced cement plaster for OUT SIDE on

27.00 walls up to height 12 metres above ground level consisting of 8 mm 3715.07 SQM 350.57

thick backing coat of C.M. 1:1 (1-Cement : 1-sand) etc. complete

Providing throating or plaster drip and moulding to R.C.C. Chajja

29.00 Prov.20mm deep finished groove etc.comp 1705.50 RMT 27.27

Finishing wall with 100% weather proof EXTERIOR paint of approved

make,brand and shade on wall surfaces (two coats), with 100% damp

proof primer one coats , recessed /embossed panels, pillars etc.,

30.00 give an even shade after throughly brushing the surface to remove 5985.67 SQM 218.16

all the dirt and remains of loose powdered material. The material

shall be as described in list of approved material.shade and pattern

as design by architect and directed by EIC.

Providing and laying 18-20mm average thick Granite stone slab

flooring cement mortar1:3 (1cement:3coarsesand) laid over and

31.00 jointed with grey / white cement slurry with matching color of stone 43.65 SQM 2521.97

including half round nosing, rubbing and polishing etc. complete.

shade and pattern as directed by Architect/enginner in charge.

Providing and laying 19 to 20mm thick BANSI stone

flooring/cladding cement mortar 1:3 (1 cement :3coarse sand) laid

32.00 over and jointed with grey / white cement slurry with matching color 1726.45 SQM 1126.15

of stone including half roundnosing, rubbing and polishing etc

Providing and laying 600×600 mm terrazzo flooring tiles, 20 mm

thick, in CM 1:4, including grinding, polishing, curing, complete. As

directed & approved by Architect and Authority etc complete.(A)

Providing and laying polished kota stone slab 25mm thick in Trade

and risers of steps,skirting Dedo and pillars laid on 10mm thick

34.00 cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray 202.14 SQM 1135.48

cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

Providing and laying 60 cm x 120 cm Antiskid Vitrified 8 mm thick

tiles flooring over over 20 mm (average) base of cement mortar

1:6(1cement : 6 coarse sand) on new surfrace jointed with colour

35.00 cement slurry including finishing with flush pointing and cleaning the 55.00 SQM 1472.91

surface etc complete shade and pattern as approved by Architect

and EIC.Asian,Simpollo,Johanson, Swastik & Rak (Premium First

Quality) FOR ALL FLOOR

Providing and laying Ceramic tiles 60 cm * 120 cm 6 mm. Thick in

kitchen,toilet and dado on 10 mm. Thick cement plaster 1:3 (1

36.00 cement : 3 coarse sand) pointing in white cleaned jointed with white 270.96 SQM 1048.26

cement slurry. size, shade and pattern as approved (matched to

flooring) for all floor WALL as design by architect and directed by EIC

Brick bat waterproofing treatment 100mm average thick in CM 1:3

37.00 with smooth surface finish and required slop etc, complete as 302.50 SQM 559.54

directed by Architect/Engineer

Providing and laying broken coloured chine mosaic flooring/Wall

Cladding for landscape area fountain storage using 12 mm to

mm broken pieces of colourfull glazed tiles to be laid over

38.00 cement mortar 1:3 to plain or slope and to be tempered to bring 302.50 SQM 1523.66

mortar creme out upto surface using white/colour cement/grout

including rounding off junctions and extending them upto

wall,clearing with water and oxalic acid etc. as directed.

WATER PROOF PLASTER: Providing 15 mm thick water proof cement

plaster with first coat of cement mortar 1:4 (1 - cement : 4 - sand)

and over a first coat finishing and floating coat of neat cement

paste mixed with integrated water proofing compound in

proportion mentioned by manufacture including necessary

scaffolding, curing etc. complete for all floors.(NOTE: This plaster is

to be applied in toilet block floors, chhajja tops, underground

water tanks etc.) To be measured in SQ.MTS.

Applying two coats of Birla (white cement based) or Asian (acrylic

lapy- putty) or equivalent & two coats of primer of approved brand

40.00 and manufacture on new wall/ceiling surface to give an even shade 2647.36 SQM 40.59

including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth.

Wall painting ( three coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even

41.00 shade including throughly brushing the surface free from mortar 2647.36 SQM 128.38

droppings and other foreign matter and sand papered smooth. on

walls shade and pattern as design by architect and directed by EIC.

TOP SOIL: Supplying and spreading in position 150mm thk layer of

good approved redsieved soil including levelling, watering,

consolidation by manually or mechanically(which ever convenient at

site) at every 50mm thik layers, cost including of allmaterials, labour

and other charges required to complete and as directed by the

Engineer In charge

Providing, supplying, laying and planting diffrent types of PALM

trees suggested area with necessary garden soil required for

43.00 trees, curing, requiredmanure, for soil bed etc. complete at all 45.00 EACH 2530.05

level, between 7 ft to 9 ft heights as design and directed by

Providing, supplying, laying and planting diffrent types of KADAM

trees suggested area with necessary garden soil required for

44.00 trees, curing, requiredmanure, for soil bed etc. complete at all 25.00 EACH 2530.05

level, between 7 ft to 9 ft heights as design and directed by

Providing, supplying, laying and planting diffrent types of NEEM

trees suggested area with necessary garden soil required for

45.00 trees, curing, requiredmanure, for soil bed etc. complete at all 36.00 EACH 2530.05

level, between 7 ft to 9 ft heights as design and directed by

Providing, supplying, laying and planting different kinds of

plants(Yellow,pink,green,etc.), shrubs and lawnsareain suggested

46.00 area with necessary garden soil required for plants, curing, 869.00 SQM 800.93

requiredmanure, for flower bed etc. complete at all level, heights as

design and directed by ARCHITECT.

Providing,supplying and laying Green lawn (SECTION-I TYPE) with

necessary garden soil, FYM( farm yard manure) required depth

excavation or filling in height as per specification, design and

directed by Architect and authority.

Providing and fixing cobbled stone flooring as per approved design

48.00 including 75mm sand layer for levaling and filling the joints with 52.50 SQM 885.77

grout in proper line and leval etc complete.

Reception counter Size: 900(D) 1200(H) Providing and curve table

with counter as shown, consist main table, counter, with pedestal

unit with all necessary accessories keyboard, CPU stand ,popup box

8M cutout with vertebrae, modesty panel etc with all required

necessary accessories. All finishes laminate shall be approved by

architect.Table top and Legs : 25mm thk chamfered finish corian

6mm thick as per approved make and sample by Architect/ Client.

Counter front :12mm thk flexi Plywood board with corian finish as

per approved make and sample by Architect/ Client Pedestal:

Providing and fixing pedestal unit comprising two box drawer and

one file drawer fitted with telescopic channels of Hettich / Häfele

make or approved equivalent for smooth operation, provided with a

central locking system locking all drawers with a single key and

finger groove handles as per approved design, and mounted on

castors for easy mobility. All finishes outside corian and inside

laminate shall be approved by architect. Rate shall inclusive of mock

up sample, all materials, loading, unloading, transportation,

monocoat polish, placing at all floors and for all leads, all accessories

as described in item description. Work complete as per the detailed

drawing , mockup sample and instruction of Architect/Client.

Providing , supplying MR Grade Plying,arranging and fixing unit size-

1500mm L X 750mm W X 750mm H made of 25mm thick table top

and legs and modesty in18mm thick, made of thick MR Grade Ply

with laminate finish with 2mm thick pvc edge banding finish. Side

unit 1000mm L X 450mm W X 750mm H and having Top and Legs in

25mm and drawer fascia, shutters,bottom made of 18mm thick MR

Grade Ply with laminate finish with 2mm thick pvc edge banding

finish. Back 9mm thick MR Grade Ply with laminate finish. Swing

shutters with lock, drawer with sliding telescopic channel, handles

provision included in it. High quality hardware should are used.

Construction: Knock down construction. The rate shall include all

materials, hardware and labour etc. complete. Finish : Approved

shade as approved by engineer in-charge/employer. For cable

manager, top cutout of 60mm shall be provided. Product

certification: ISO 9001, ISO 14001 & ISO 45001 (Certifying agencies of

ISO should be accredited by” NABCB” ), AIOTA office furniture, IGBC,

BIFMA Membership and Green Pro (CII) certificate.BIFMA Test

Report: ANSI/BIFMA X5.5-2021 For: Desk & Table Products Executive

Desk/Office Table.Approved make - GODREJ,HERMAN MILLER,

STEELCASE, KNOLL,HOF,ROCKWORTH,HAWORTH.

Café Table 4 pax Size: 1100(Dia) X 750(H) Providing and fixing Table, with all

necessary accessories. All finishes laminate,powder coating shade shall be approved

by architect. Table top : 25mm thk plywood with 1mm laminated both side Plywood

with 2mm thick matching PVC edge banding as per approved make and sample by

Architect/ Client. Understructure-Metal powdercoted leg as shown with time

member with mounting supports All finishes laminate,powder coating shall be

approved by architect. Rate shall inclusive of mock up sample, all materials, loading,

unloading, transportation, monocoat polish, placing at all floors and for all leads, all

accessories as described in item description. Work complete as per the detailed

drawing , mockup sample and instruction of Architect/Client.

Three Seater Sofa-Providing and supply Sofa sturcture made from

18mm MR Grade Mr grad plywood supported with Maranti Solid

wood, back side and curved part Covered with 3mm flexi ply, sofa

arm made from 12mm thick MR Grade Mr grad plywood supported

with maranti solid wood. Elastic Belt, 75mm board & 2.25 mm thick

elastic webbing stapling in seat frame at 100 mm centre to centre

distance, belt fastern in X and Y axies of seat, elastic belt elongation

52.00 45% tensile strength 350 kg. Foam 100 mm X 40 density Premium 2.00 EACH 136350

Quality foam covered with 25mm X 32 density super soft Premium

Quality Foam for soft touch filling in seat. 50 mm X 40 density

Premium Quality foam covered with 25mm X 32 density super soft

Premium Quality foam for soft touch filling in back. Stiching Stiching

work done with well known german brand (Aman / Gutermann)

Thread. Nylone & Polyster thread used as per application. Wooden

Frame and Legs applied with polishing.

Café Chair-Providing and supply (A) Full Height 839 mm,(B)

Frame/Legs Height 432 mm,(C) Length 534 mm,(D) width 496 mm.

53.00 Varients of Colors in- White,Symphony Pink, Symphony Brown, 32.00 EACH 5555

Symphony Gray, Symphony Green. seat- polypropylene alloy seat

with cushion. legs-polypropylene alloy.

A durable injection moulded Black shade PP(Polypropylene)+ Nylon

plastic material backrest features breathable mesh fabric for better

ventilation and adjustable lumbar support for customized comfort

and spinal alignment; The seat features a 12mm thick molded

plywood base, topped with a layer of PU (Polyurethane) mold foam

that has a density of 57(+/-5) kg/m³; The armrest has a sturdy PP

construction and allows for 1-way adjustment, enabling users to

customize the height to their preference. The backrest is fitted with a

synchronous tilt mechanism featuring a single-position locking

system, allowing for controlled tilting by a tension-adjustable spring

system; A height adjustment is facilitated by a 90mm stroke Class

gas spring lift, ensuring smooth and stable height control; A sturdy 5-

leg nylon plastic base with a diameter of 660mm for enhanced

stability, equipped with 60mm twin-wheel casters for smooth

movement on all surfaces, Approved make - GODREJ,HERMAN

MILLER, STEELCASE, KNOLL,HOF,ROCKWORTH,HAWORTH.

Providing, Supplying, Installation, Testing & Commissioning of 4 Face

Quartz Tower Clock (1200 mm) complete with microprocessor-based

quartz mechanism, motor drive unit, centralized gear system,

coupling assembly and in-built 12-hour battery backup, operating on

55.00 230V AC supply. The dial shall be M.S. frame with polycarbonate 1.00 EACH 560550

sheet and aluminium balanced hands, suitable for all weather

conditions, including GPS-based electronic striking system with

timer, amplifier and 4 horn speakers & all labour and installation.

Providing and fixing Double Glazed Unit (DGU) glass comprising

mm required colour tinted toughened glass (outer side) + 12 mm air

gap + 6 mm clear toughened glass (inner side), fixed in aluminium

56.00 frame with EPDM gasket, structural silicone sealant and necessary 28.84 SQM 16311.5

fittings, including fabrication, fixing and sealing, complete as per

approved drawings and direction of Engineer-in-charge-approved

make-saint Gobain or Modi guard

Providing and fixing 5 mm thick clear toughened glass door/window

openable in powder coated / anodized aluminium Domal section

frame, including frame system with, handles, lock, wool pile, rubber

gasket, screws, fasteners, sealant,floor spring,glass cutout and all

necessary accessories. The aluminium sections shall be extruded and

fabricated with proper mitred joints and fixed in position with hold

fasteners / screws including making grooves and finishing edges

complete in all respect with material, labour, scaffolding,

transportation and installation as per drawings and direction of

Engineer-in-Charge

Clearing and grubbing road land including uprooting rank

vegetation grass bushes,shrubs,sapling and trees girth up to

58.00 mm removal of stumps of trees cut earlier and disposal of 11020.00 SQM 3.45

unserviceable materials(D) By mechanical means in area of

Earthwork in cutting in all sorts of soil, flexible payment road and

soft murrum, including conveying and spreading the stuff,

embankment as and where directed from the end of the cutting with

all required lead and lift. Including all type depths.

Supplying and filling in foundation selected soil in layers of 20cm

thickness with a CBR equal of greater than 8. including

watering, ramming and consolidating and upto required lead.

60.00 complete. For the preparation of top layer & require to prepare the 1000.00 CUM 285.83

cross-section wherever the available width is more than the

designed section, as directed by the EIC and approved drawing.

Road, Footpath & Parking

Providing laying and spreading granual material in required

proportion so as to have mix material gradation of GSB grade ll,

61.00 oncluding sprending in uniform thickness, rolling with vibratory 500.00 CUM 1008.99

roller 80-100 kn tatic wt. to proper grade and camber including

watering etc. complete. Road, Footpath & Parking

Providing and laying compacted W.B.M. 100 mm thick of

machine crushed B.T. metal of size 45 mm to 90 mm with using

62.00 20 % stone screenings as filler grit and stone dust including 500.00 CUM 1970.83

spreading, watering & consolidation by vibratory roller etc

complete. Road, Footpath & Parking

Providing and laying 50 mm Thick Dense Bituminous Macadam

compacted thickness using specified graded black trap crushed

stone aggregates as per MORTH gradation using emulsion for

tack coat (Rapid setting) @ 2.5 Kg./10 Sq.m. with mechanical

sprayer and VG 30 bulk bitumen for mixing at the rate of 4.5 %

63.00 (45 Kg./M.T.) by Drum mix and hot laid process using sensor 346.38 MT 3633.98

paver finisher to the required camber and grade, and rolling with

vibratory roller to achieve desire density including prime coat,

cost of fire wood, oil, Kerosene, flushing of stone dust as

required, labour charges and hire charges of machineries etc.

Providing and laying 30mm mm thick Bituminous concrete with

B.T. stone chips as per MORTH gradation and specifications

using VG 30 bulk bitumen for mixing at the rate of 5.0 % (50.0

Kg./M.T.)by wt. of total mix inclg. heating the asphalt, aggregates

64.00 by continous batching drum mix plant and spreading the same by 216.95 MT 3849.11

paver finisher to the required camber and grade, including rolling

with vibratory roller to achive desired density and using, asphalt

painting, fire wood, oil, Kerosene, labour charges and hire

charges of machinaries etc. complete.

Cautionary Warning Sign:- Providing and fixing sing boards

made out of 2mm aluminium sheet; size 90 x 90x 90 cms.

equilateral triangle as per design of IRC-67-2022. Pre treated with

phospheting process & acidetching; coated with one coat of

epoxy primer and two coats of best quality epoxypaint;

reflectorised withretro refiective sheeting as per latest

M.O.S.T.Specifications; 3.1m long stand postand frame

65.00 fabricated from suitable sizeiron angle of 35 x 35 x3mm, 75 x 75 30.00 EACH 3808.65

x 6mm as required; painted with bestquality epoxy coatings in

black andwhite bends. The details of symbol foreach board shall

be as per theinstruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the

supervision of engineer in charge.(A) Engineer

Regulatory/Mandatory signs:- Providing and fixing signboards

made out of 2mm aluminium sheet, size 60 cm. diameter circle as

per the design of IRC-67-2022 pre treated with phospheting

process & acid eteching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T. Specifications; 3.1m

long stand post and frame fabricated from suitable size iron angle

of 35 x 35 x 3mm 75x75x6mm as required; painted with best

quality epoxy coatings in black and white bends. The details of

the symbol for each board shall be as per the instructions of the

engineer in charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60 cm. for each leg. including excavation curing

etc., complete under the supervision of the engineer in charge.(A)

Informatory Signs:- Providing and fixing sing boards made out

of 2mm aluminium sheet; size 80 x 60cms. rectangle as per the

design of IRC-67 2022 pre treated with phospheting process &

acid teching; coated with one coat of epoxyprimer and two coats

of best qualityepoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; 3.1m long stand

postand frame fabricated from suitable sizeiron angle of 35 x 35 x

3mm 75x75x6mm as required; painted with best qualityepoxy

coatings in black and whitebends. the details of symbol for

eachboard shall details of symbol for eachboard shall be as per

the instruction ofengineer in charge. The fixing at site shall be in

1:2:4 CC block of size 45 x45 x 60cms. for each leg. including

excavation curing tec. complete under the supervision of engineer

in charge.(A)EngineerGrade......................

Direction sign (Junction board):- Providing and fixing sing

boards made out of 2mm aluminium sheet; size 244 x 122cms.

rectangle as as per the design of IRC-67-1977 pre treated with

phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint;

reflectorised with retrorefiective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as per IRC 30-

68.00 1968, 3.1 m long (2 nos) stand post and frame fabricated 6.00 EACH 14831.7

fromsuitable size iron angle of 50 x 50 x 5mm 75x75x6mm as

required; painted with best quality epoxy coatings in black and

white bends. the details of symbol or inscription / numerals for

each board shall be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

60cms. for each leg. including excavation curing etc. complete

under the supervision of engineer in charge.(A) Engineer Grade

Place ideatification sign :- Providing and fixing sing boards

made out of 2mm aluminium sheet; size 150 x 90cms. rectangle

as as per the design of IRC-67-1977 pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T. Specifications; Letters

and numerals should be as per IRC-30 1968, 3.1 m long (2 nos)

69.00 stand post and frame fabricated from suitable size iron angle of 14.00 EACH 9390.65

50x50x5mm 75x75x6mm as required; painted with best quality

epoxy coatings in black and white bends. The details of symbol or

inscription / numerals for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including

excavation curing etc. complete under the supervision of engineer

in charge.(A) EngineerGrade

Providing and laying of Hot applied Thermoplastic compound

mm thick including Reflectorising Glass Beads @ 250 gms per

70.00 sqm area, thickness of 2.5 mm is exclusive of surface applied 450.00 SQM 367.72

glass beads as per IRC : 35 & finished surface to be level,

uniform and free from streaks and holes.

Supplying and fixing cat eye (Stimsonite) made out from Acrilo

beautile sterine injuction high compressed molding with reflector

71.00 made of MMC (prismatic type of size 12cm x 6cm x 2.5cm) 100.00 EACH 375.72

provided with bituminous adhesive 100g. with each unit for

fixing. (High Intensity grade)

Suppling and fixing RCC Precast Bollards on Footpath as per entry

restriction of vehicle , Size-15Cm Dia and 95Cm Height

including foundation, erecting and colour (primer coat and 2 coat

paint epoxy coated paint shall be used.)

Providing and fixing pre-cast Rubber Dye inter locking concrete

block 60 to 65mm thick with grade of concrete M400 pnumatic

compressed/ vibrated mechanically and as per approved design

73.00 Confirming to IS 15658: 2006 including 35 mm Sand layer for 2130.00 SQM 562.57

levelling and filling the joint with sand in proper line and level as

per guidlines of IRC :SP 63 2018 etc. Complete. Footpath &

Providing fixing new pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cm height and 15cm thick of

M250 grade concret as per approved design and including

excavation for fixing in proper line and level,filling the joint with

C:M 1:3 (1cement: 3fine sand) ,1 coat primer and 2 coat paint etc

Providing and fixing MS railing made of Squre Hollow tubes,

including welding, grinding, buffing, polishing and making

curvature (wherever required), primer coat, two coat paint and

75.00 fitting the same with necessary nuts and bolts complete, i/c fixing 7560.00 KG 121.2

the railing with necessary accessories & dash fasteners, bolts etc.,

of required size, on the top of the Footpath key with suitable

arrangement as per approval of Engineer in-charge,

Providing and applying two coats of synthetic enamel paint to the

76.00 steel railing as per the Technical Specifications and as directed 432.00 SQM 94.39

by the Engineer.

Providing and applying two coats of synthetic enamel paint,

77.00 including primer, to the kerb as per technical specifications and 202.50 SQM 94.39

as directed by the Engineer-in-charge.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

78.00 chamber and water tight C.I.Cover with frame of 300 mm x 300 mm 5.00 EACH 1292.19

size (inside) with standard weight. 100 m x 100 m.size P.Type.

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less

than 35 kg. Cm² in C.M. 1:5 C.I. cover with frame (Light duty) 455 mm

x 610 mm internal dimensions, total weight of cover with frame to

be not less than 38 kg.(Wt. of cover 23 Kg.) and (Wt. of frame 15 Kg.)

79.00 R.C.C. top slab with 1:2:4 mix (1-cement :2-coarse sand : 4- graded 5.00 EACH 2932.92

stone aggregate 20 mm size) foundation concrete 1 :5 :10 inside

plaster 15 mm thick with cement mortar 1 :3 finished smooth with a

floating coat of neat cement on walls and bed concrete etc.complete.

(A) Inside dimensions 500 mm x 700 mm and 450 mm deep for pipe

line with one or two inlets.

Providing and constructing Sewer manholes, scraper manholes and

unit house connection chamber, as per the type design in brick

masonary in C. M. 1:3 ,inside and outside lastering in C. M. 1:3

necessary coping in R.C.C.M. 200 fixing C. I. steps and fixing manhole

frame and covers (But excluding supply of manhole frame and

covers) over manholes and house connection chambers and fixing

80.00 Manhole covers (but excluding supplying of manhole covers) over 1.00 EACH 12300.79

scraper manhole etc. complete, providing and fixing safety chain

wherever necessary as per the stipulations in the type desing

complete (excl. excavation). Manhole type "A" circular type having

inside diameter of minimum 1200 mm and for depth from 0 M to

1.50 M (for 150 mm to 500 mm dia sewers). Manhole type "A" as

above but up to 1.0 M depth.

Providing and fixing 35 mm thick shutters for Doors, windows

and clerestory windows including Indian teak wood frames 10cm

81.00 x 7 cm. size including anodized alluminium fixtures and fastenings 40.19 SQM 5338.3

including primer coat of approved quality and two coats of oil

painting etc, complete. (ii) Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors, windows

and clerestory windows including Indian teak wood frames

82.00 cm x 7 cm. size including black enamelled iron oxidixed 4.06 SQM 4641.01

fixtures and fastenings including primer coat of approved quality

and two coats of oil painting etc, complete. (i) Fully Glazed.

Appliying priming coat over new wood and wood based surface

after and including preparing the surface by throughly cleaning

83.00 oil, grease, dirt and other foreign matter, sand papering and 115.91 SQM 44.64

knotting. (B) Ready mixed

paint brushing wood primier pink.

Painting two coats (excluding priming coat) on new wood and

wood based surface with enamel paint, interior to give an even

84.00 shade including cleaning the surface of all dirt, dust and other 115.91 SQM 95.95

foreign matter sand papering and

Providing and Fixing Tensile roof sheets are lightweight, high-

strength fabric membranes (like PVC-coated polyester, PTFE, or

ETFE) stretched over a support structure (cables, steel) to create

large, often column-free, curved roofs, offering dynamic design,

natural light, and weather protection for public spaces,including

all fitting labour etc, complete as directed by Architect/Engineer

Providing,Making, Fabricating, Eracting with Fixing M.S.

Fabricated Structure as per required cnc cutting and design, m.s

flat , M.S.box pipe, M.S. round dia pipe M.S.Hollow Pipe top cover

as per design (square/round), M.S. polished square and round

shape as per design,MS angle & GI Concertina coil wire for

fencing, M.S Polished flat with making required size hole at

required spacing as design by architect and directed by EIC.and

hold fast with coach bolts & required fitting including all as per

drawing etc. complete.as design by architect and directed by

Applying priming coat over new steel and other metal surfaces

after and including preparing the surface by thoroughly cleaning,

87.00 oil grease, dirt and other foreign matter and scoured with brushes 1172.60 SQM 37.62

fine steel wool, scrapers, and sand paper with ready mixed

priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel

and other metal surfaces with enamel paint, brushing interior to

give an even shade including cleaning the surface of all dirt,

dust and other foreign matter.

Providing and fixing C.P.V.C. water supply pipes schedule 80 pipes

confirming to ASTM F-441 for hot as well as cold water supply with

necessary fitting like Tee, Elbows, Union, coupler, etc. in walls as

89.00 well as floors concealed in walls and finishing the wall with cement 200.00 RMT 170.35

mortar to give each finish of brands like Astrl or Finolex. Complete

with necessary scaffolding at all levels.

(A) 15 mm Ø C.P.V.C. pipes.

90.00 -Do- (B) 25 mm Ø C.P.V.C. pipes. 200.00 RMT 253.82

91.00 -Do- (C) 32 mm Ø C.P.V.C. pipes. 100.00 RMT 338.23

92.00 -Do- (D) 40 mm Ø C.P.V.C. pipes. 200.00 RMT 447.72

Providing and fixing concealed center point to wall ceiling & floor

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

93.00 seal for potable water of following dia. nominal bore tube fittings 500.00 RMT 660.58

and clamps including making good the wall, ceiling and floor

etc.complete. [F] 50mm.

Providing and fixing in position C.P.V.C. Ball valve confirming to

ASTM F-441 to water supply line. (A) 25mm Ø C.P.V.C. Ball valve.

95.00 -Do- (B) 32 mm Ø C.P.V.C. Ball valve. 10.00 EACH 544.39

96.00 -Do- (C) 40 mm Ø C.P.V.C. Ball valve. 5.00 EACH 602.97

Providing laying and jointing in true line and level 110 mm dia.

U.P.V.C. Pipe (SCH- 40) for cold water including fittings make PRINCE

/ SUPREME / ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

Providing and laying to level and slope` under ground

98.00 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer outer and 100.00 RMT 393.9

inner solid P.V.C. (A) 110 mm Ø 3.2 mm thick.

Providing and laying to level and slope` under ground

99.00 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer outer and 50.00 RMT 584.79

inner solid P.V.C. (B) 160 mm Ø 4.7 mm thick.

Providing and laying to level and slope` under ground

100.00 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer outer and 10.00 RMT 737.3

inner solid P.V.C. (C) 200 mm Ø 4.7 mm thick.

PProviding and fixing washbasin with single hole for pillartap with

C.I. or M.S. brackets painted white includingsutting holes and making

101.00 good the same but including fittings.(A) Vitreous China:(ii) Flat Back 4.00 EACH 1520.95

mm x v 400mm size. (i) In white colour

Providing and fixing C.P. Pillar cock 15 mm Heavy duty swan neck

with flange and wall flange of make like Jaguar, ESS ESS, Cera (to be

provided for water tubes in no.) C.P. Pillar cock 15 mm Heavy duty

Providing and fixing C.P. Angle stop cock 15 mm Heavy duty with cap

103.00 and wall flange of make like Jaguar, ESS ESS, Cera & providing water 4.00 EACH 407.42

tubes/connection pipe with fitting all including.

Providing and fixing Urinal of approved quality

includingconnection with trap and with integral longitudinal flush

104.00 pipe complete set (unit) including connecting the whole unit with 4.00 EACH 1670.73

water supply and drainage.(in nos.) .(A) Squating plate pattern

white earthenware 550mm x 300mm.

Providing and fixing wash down water closet (European type, W.C.

Pan) with integral P or S trap including jointing the trap with soil pipe

in Cement Mortar 1:1 (1-Cement : 1- fine sand) (A) vitreous China

Pattern :(i) in white colour (all C.P. fitting of approved brand like

Jaguar, ESS ESS or Cera) Jet spray heavy duty with S.S. Braided hose

60 cm long with brass screw down stop tap.(A) 15mm

dia. complete set (unit) including connecting the whole unit with

water supply and drainage.(in nos.)

Providing and fixing chromium plated brass half trun flushcock of

106.00 approved quality including fixing in pipe line etc.complete.(ii) 25mm 9.00 EACH 263.77

Providing and fixing self closing press matic bib cock with flange and

107.00 wall flange of make like Jaguar, ESS ESS, Cera (to be provided for 12.00 EACH 1599.84

water tubes in no.)

OVER HEAD PVC WATER TANK : Supplying, lifting and installing in

position, PVC water tank 'EURO' or equivalent having cross section of

tank wall having outer coloured layer, U.V resistant layer, insulating

108.00 layer and anti bacterial inner layer. Cost including transporting, 5000.00 LTR 3.94

labour and making necessary connection for inlet, outlet, linkage,

overflow, wash-out, etc.with required platform etc. as directed by

engineer in charge.

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 100 mm diameter with SS jali of the following nominal

109.00 diameter of self cleansing design with C.I scread down or 20.00 EACH 651.54

hinged grating including the cost of cutting and making

Applying Anti corrosve Chemical treatment Food Grade epoxy for

water retaining structure including cleaning the surface thoroughly &

making surface dry. Even & smooth for applying treatment and

coats.DCL1400 with 3 years Guarantee.

Providing and applying a protective and waterproofing coating of

approved quality [Bituminous Paint/Bitumen Emulsion/Bituminous

Mastic] conforming to IS: 158 (or relevant IS code) on the external

111.00 surface of the Reinforced Cement Concrete (RCC) water tank, 48.00 SQM 190.89

including all necessary surface preparation, cleaning, and application

of two or more coats as specified by the engineer-in-charge,

Supply and installation of Triple Seater Spinner (Model: VSW 03)

made from heavy duty galvanized iron pipe structure complete with

triple seating arrangement, circular support frame, handle grips with

safety knobs, and FRP molded comfortable seats. The equipment

shall be finished with high quality PU paint coating, making it rust

proof and weather resistant for long-term outdoor use. The unit shall

safely accommodate 02 children at a time and shall be suitable for

installation in an approximate area of 6’-0” x 6’-0”.

Supply and installation of Triple Seater Spinner (Model: VSW 05)

made from heavy duty galvanized iron pipe structure complete with

triple seating arrangement, circular support frame, handle grips with

safety knobs, and FRP molded comfortable seats. The equipment

shall be finished with high quality PU paint coating, making it rust

proof and weather resistant for long-term outdoor use. The unit shall

safely accommodate 02 children at a time and shall be suitable for

installation in an approximate area of 6’-0” x 6’-0”.

Supply and installation of Multi Swing Set (Model: VSS 05) made

from heavy duty galvanized iron pipe structure complete with

standard swing seats, platform disc swings, heavy duty swing frame,

and high strength colour coated chains with safety covering. The

seats shall be made from heavy duty rubber material suitable for

outdoor playground use. The entire equipment shall be finished with

high quality PU paint coating, making it rust proof and weather

resistant for long-term outdoor installation. The unit shall safely

accommodate 04 to 06 children at a time and shall be suitable for

installation in an approximate area of 18’-0” x 6’-0”.

Supply and installation of Merry Go Round (Model: VMR 03) made

from heavy duty galvanized iron structure complete with circular

rotating platform and bench type seating arrangement. The platform

shall be manufactured using anti-skid G.I. sheet to ensure user safety

115.00 during operation. The equipment shall be finished with durable paint 1.00 EACH 26260

coating, making it rust proof and weather resistant for long-term

outdoor use. The unit shall safely accommodate 04 to 06 children at

a time and shall be suitable for installation in an approximate area of

4 feet diameter.

Supply and installation of Multi Play Station (Model: VMPS 13)

made from heavy duty galvanized iron pipe structure complete

with elevated platforms having safety railings, spiral slide,

covered tunnel slide, and swing arrangement. The slides shall be

manufactured using high quality LLDPE / HDPE material suitable

116.00 for outdoor playground applications. The entire equipment shall 1.00 EACH 141400

be finished with durable auto refinish paint coating, making it rust

proof and weather resistant for long-term outdoor use. The unit

shall safely accommodate 12 to 18 children at a time and shall

be suitable for installation in an approximate area of 18’-0” x 22’-

Supply and installation of WXGA Multimedia Projector (Model:

BenQ MW560N) having native WXGA resolution of 1280 x 800 with

minimum brightness of 4,500 ANSI lumens and contrast ratio of

25,000:1. The projector shall support high quality digital image

projection suitable for classrooms, conference rooms, training

centres, and multimedia presentations. The unit shall be based on

DLP projection technology with standard connectivity options

including HDMI, VGA, USB, and audio interfaces. The projector

shall be supplied complete with all standard accessories, power

cable, remote control, and manufacturer warranty.

Supply and installation of Motorized Projection Screen having 100-

inch diagonal viewing size with approximate viewing area of 60”

x 80” and 4:3 aspect ratio. The screen shall be made from high

quality matte white 4K compatible projection fabric with high

gain surface for enhanced image clarity and brightness. The unit

shall be equipped with heavy duty synchronous motor for smooth

and noiseless operation and shall include RF remote control

system for convenient screen operation. The screen shall be

suitable for wall or ceiling mounting and intended for use in

classrooms, conference halls, auditoriums, and training rooms.

Supply and installation of Wall Mount Speaker System (Model:

Byford Audio WP66) consisting of 2-way passive speaker

configuration with 6.5-inch woofer and 1-inch tweeter. The

speaker shall support multi-tap power output of 40W / 20W / 10W

at 100V line operation suitable for public address and sound

reinforcement applications. The speaker shall provide minimum

sound pressure level of 91 dB SPL with frequency response range

from 70 Hz to 20 kHz for clear audio reproduction. The cabinet

shall be manufactured from high quality ABS plastic with durable

matte finish suitable for wall mounted indoor installations. The unit

shall be supplied complete with standard mounting accessories

and manufacturer warranty.

Supply and installation of PA Mixer Amplifier (Model: Urban

Classic PA-120) having minimum output power of 120 Watt RMS

suitable for public address and sound reinforcement applications.

The amplifier shall be provided with minimum 03 microphone

inputs and 01 auxiliary input along with built-in Bluetooth and USB

connectivity for multimedia audio playback. The unit shall

120.00 include 2-band equalizer for tone adjustment and clear sound 1.00 EACH 21614

reproduction. The amplifier shall be suitable for operation with

100V line speaker systems in classrooms, conference halls,

auditoriums, and public announcement systems. The equipment

shall be housed in heavy duty metal cabinet and supplied

complete with all standard accessories and manufacturer

Supply of High-Speed HDMI Cable (10 Meter) compliant with

HDMI Version 2.0 supporting 4K Ultra HD video transmission. The

cable shall be equipped with gold plated connectors to ensure

better conductivity, corrosion resistance, and long-lasting

performance. The cable shall support high-speed digital audio-

video signal transmission with minimal interference and shall be

suitable for connecting multimedia devices such as projectors,

laptops, computers, and display systems. The cable shall be

supplied in complete working condition, suitable for plug-and-

play installation.

Supply of Heavy Duty Projector Ceiling Mount Kit (1+1 Arm Type)

made from high strength metal suitable for safe installation of

multimedia projectors. The mount shall be powder coated for

corrosion resistance and long life. It shall be equipped with

adjustable tilt, swivel, and height adjustment features to ensure

122.00 proper alignment and projection positioning. The unit shall be 1.00 EACH 2020

universal compatible with standard projector mounting points

and shall be suitable for installation in classrooms, conference

halls, and training rooms. The item shall be supplied complete

with all necessary installation accessories, fasteners, and

mounting hardware.

Supply, installation, testing, commissioning and calibration of

complete Audio-Visual system including projector, motorized

screen, PA system, speakers, cables and all related accessories.

The scope includes all necessary minor accessories such as

connectors, fasteners, clamps, cable management items and

consumables required for proper installation and integration of JOB

the system. Work includes complete installation, alignment, audio WORK

tuning, projector focusing, screen adjustment, system

configuration, testing and commissioning to ensure full

operational readiness.

All work shall be executed by skilled technical personnel as per

standard electrical and safety norms.

Pro. And fixing single layer water proof gypsum board

mm thick sections using water proof board of size 1220 mm

x 1830 mm x 8.0 mm suspended by GI suspender channel

of size 25 mm x 3 mm with intermediate channel og size

mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling

section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c

and perimeter channel A of size 20 mm x 27 mm x 30 mm x

0.5 mm at edges & drops incl.paper tap sand sofit cleat,

anchor fastener, scoch bolt connecting cleat,joining

compound top coat on ceiling incl.making necy.opening for

light fitting,diffuser etc. comp. as per detail drawing as

GRID FALSE CEILING :- P&F Perforated ceiling 600 x 600 mm with

grid section (24/15mm) with semi recessed / micro look joints, NRC :

0.9, Fire resistance : Class-A, as per design, with 50 mm. rockwool,

inclusive of fixing, labour and all other required acessories etc

complete as per the company specifications and guidelines

(ECOTONE / GYPROC / ARMSTRONG )

Supply and fix FRP (Fibre Reinforced Polymer) cladding panel,

mm thick, UV stabilised, colour and finish as approved by

126.00 Architect, fixed to MS sub-frame with SS self-tapping screws, EPDM 9.90 Sqm 1363.5

washers, and neutral-cure silicon sealant at all joints and edges

Wall – 1 (Rear face) : 3.00 m wide × 3.30 m high

Supply and fix FRP cladding panel, 3 mm thick, UV stabilised

127.00 (specifications as item 1.1 above). 7.16 Sqm 1363.5

Wall – 2 (Side face) : 2.17 m wide × 3.30 m high

Supply and fix FRP cladding panel, 3 mm thick, UV stabilised

128.00 (specifications as item 1.1 above). 7.16 Sqm 1363.5

Wall – 3 (Side face) : 2.17 m wide × 3.30 m high

Supply and fix FRP cladding panel, 3 mm thick, UV stabilised

129.00 (specifications as item 1.1 above). 6.51 Sqm 1363.5

Roof Panel : 3.00 m × 2.17 m

Supply and install SS 304 self-tapping screws M6 diameter with

130.00 EPDM bonded washers for fixing FRP panels to MS sub-frame, at 6 185.00 Nos 12.12

nos per sqm, including all making good.

Supply and apply neutral-cure UV-stable silicon sealant at all FRP

131.00 panel joints, edges, and perimeter including surface preparation 45.00 Rmt 85.85

Supply and fix FRP corner trims / aluminium flashing strips at all

132.00 external corners, eaves edges, and panel terminations including 18.00 Rmt 222.2

SS fixings and sealant.

Apply 2 coats of exterior grade acrylic paint to FRP cladding

133.00 surface, colour as directed by Architect, including surface 30.73 Sqm 95.95

preparation, primer coat, and all finishing as specified.

Supply, fabricate and install decorative hollow sphere of diameter

2000 mm (radius R = 1.00 m) as shown on Drawing C-1 Elevation,

fabricated from SS 304 grade sheet 1.5 mm thick, pressed into

134.00 segments, TIG welded, weld dressing and satin polished to 1.00 Nos 95950

smooth finish, mounted on MS support bracket with SS flange

plate, complete in all respects.

1 No. – Dia 2000 mm (R 1.00 m)

Supply, fabricate and install decorative hollow SS 304 sphere as

135.00 per specifications of item 2.1 above. 1.00 Nos 62620

1 No. – Dia 1600 mm (R 0.80 m) | SS 304 sheet 1.5 mm thick

Supply, fabricate and install decorative hollow SS 304 sphere as

136.00 per specifications of item 2.1 above. 2.00 Nos 22220

2 Nos. – Dia 900 mm (R 0.45 m) | SS 304 sheet 1.2 mm thick

Supply and weld SS 304 mounting flange plate 150 × 150 × 6 mm

137.00 thick to each SS sphere for bolting to MS mounting bracket, 4.00 Nos 656.5

including all SS hardware, 1 no per ball.

Erection, installation, alignment and final securing of SS

138.00 decorative balls on MS cloud frame mounting brackets including 4.00 Nos 505

all lifting, positioning and final fastening complete in all respects.

Supply, fabricate and erect MS circular hollow section (CHS)

100NB (114.3 mm OD × 6.3 mm wall thickness) to IS:1161 Grade

139.00 YST 310, as main arch spine spanning over the gate opening, 284.00 Kg 88.88

shop fabricated, primed and delivered to site.

Unit weight = 14.20 kg/m | Run = 20.00 m | Weight = 284.0 kg

Supply, fabricate and erect MS square hollow section (SHS) 75 ×

75 × 4 mm to IS:4923 Grade YST 310, as cloud outline ribs and

140.00 secondary frame members forming the FRP cloud cladding 180.00 Kg 82.82

profile, shop fabricated and primed.

Unit weight = 8.69 kg/m | Run = 20.70 m | Weight = 180.0 kg

Supply, fabricate and fix MS square hollow section (SHS) 50 × 50 ×

3 mm to IS:4923, as purlins, cross-bracing and FRP panel support

sub-frame welded to secondary ribs.

Unit weight = 4.25 kg/m | Run = 30.00 m | Weight = 127.5 kg

Supply, fabricate and weld MS flat bar 50 × 6 mm as FRP panel

fixing cleats, edge trims and perimeter framing to cloud sub-

Unit weight = 2.22 kg/m | Run = 27.00 m | Weight = 59.9 kg

Supply, fabricate and weld MS gusset and connector plates,

143.00 mm thick, at all frame node connections, as required for structural 80.00 Kg 72.72

integrity of the cloud frame assembly.

Supply, fabricate and grout MS base plate 350 × 350 × 16 mm

thick, with 4 nos M20 × 300 mm long anchor bolts, nuts and

144.00 washers, fixed to RCC / MS pillar at arch foot, including all 2.00 Nos 4545

grouting complete.

2 Sets – One at each arch foot

Supply, fabricate and weld MS intermediate support bracket to

gate pillar or column for mid-span arch support, fabricated from

145.00 MS plate and flat bar as required, including all fixing bolts and 4.00 Nos 1818

4 Nos – At mid-span support points

Supply, fabricate and weld MS ball mounting bracket consisting

of 150 × 150 × 8 mm MS plate with 50NB MS pipe stub 150 mm

146.00 long, welded to main arch frame at required angle and position 4.00 Nos 959.5

for fixing each SS decorative ball, 1 no per ball.

4 Nos – One bracket per SS ball

Structural welding: provide 6 mm fillet weld at all connections

throughout the cloud frame assembly, including tack welding, full

penetration welds at primary connections, weld dressing and

inspection as directed, estimated weld run = 80 m.

Apply 2 coats of rust-inhibitive red oxide primer to all MS frame

148.00 surfaces including weld zones, cut ends and exposed metal, after 160.00 Sqm 85.85

wire brushing and surface preparation to Sa 2.5 standard.

Apply 2 coats of enamel finish paint over primed MS surfaces,

149.00 colour as directed by Architect, including touch-up to damaged 160.00 Sqm 111.1

primer areas after erection, to achieve minimum 80 micron DFT.

Hire of 25 Tonne capacity hydraulic mobile crane for erection and

alignment of MS cloud frame arch and positioning of SS

150.00 decorative balls, including all rigging, slings and associated 1.00 LS 14140

Duration: 1 Day – Bhavnagar

Skilled erector and rigger for assembly, erection and alignment of

MS cloud frame and installation of SS balls including all safety

equipment and supervision as required.

4 Nos × 5 Days = 20 Man-days

Helper / mazdoor assisting erection team for handling, lifting and

152.00 general site work during MS frame erection and ball installation. 20.00 Day 454.5

4 Nos × 5 Days = 20 Man-days

Supply, cut and fix 19mm semi-WP IS:303 BWR plywood

(Greenply/Century/SRG or approved equal) for horizontal shelf

153.00 panels (top, bottom & 4 intermediate = 6 nos) of stool shelf unit, 10.66 Sqm 1393.8

including cutting to size, MS screws, fevicol bonding, all carpentry

Supply, cut and fix 19mm semi-WP IS:303 ply vertical end side

154.00 panels (left & right), spec. as item 1.1. 2.04 Sqm 1393.8

Supply, cut and fix 19mm semi-WP IS:303 ply internal vertical

155.00 dividers (6 nos, 7 columns), spec. as item 1.1. 6.13 Sqm 1393.8

Supply, cut and fix 12mm semi-WP IS:303 BWR ply back panel of

stool shelf unit, wall side, fixed with MS screws and rawl plugs, all 1151.4

carpentry complete.

Supply and apply 1mm decorative laminate

(Merino/Greenlam/Formica) to front face of stool shelf unit, 1116.05

contact adhesive, edges trimmed flush.

1mm laminate – top & bottom faces of 6 horizontal shelves (12

158.00 faces), spec. as 3.1. 21.32 Sqm 1116.05

1mm laminate – both faces of 6 internal dividers (12 faces), spec.

1mm laminate – inner faces of 2 end side panels, spec. as 3.1.

1mm laminate – front face of 12mm back panel, spec. as 3.1.

Supply, cut and fix 19mm semi-WP IS:303 ply horizontal shelf

162.00 panels (4 nos), spec. as 1.1. 4.75 Sqm 1393.8

Supply, cut and fix 19mm semi-WP IS:303 ply vertical end side

163.00 panels (2 nos), spec. as 1.1. 1.59 Sqm 1393.8

Supply, cut and fix 19mm semi-WP IS:303 ply internal vertical

164.00 dividers (3 nos), spec. as 1.1. 2.38 Sqm 1393.8

Supply, cut and fix 12mm semi-WP IS:303 ply back panel of

165.00 display shelf unit, wall side, spec. as 2.1. 5.37 Sqm 1151.4

Supply and apply 1mm decorative laminate

(Merino/Greenlam/Formica) to all exposed surfaces of display

shelf unit: front face, all shelf top & bottom faces, all divider faces,

side inner faces and back panel face, spec. as item 3.1.

Front: 5.37 + Shelves(8): 9.5 + Dividers(6): 4.76 + Sides(2): 1.59 +

Back: 5.37 = 26.59 sqm

Supply, cut and fix 12mm semi-WP IS:303 ply circular seat disc,

Dia 400mm, CNC/jigsaw cut, edges sanded smooth, for Fixed 232.3

stools (Yellow).

Supply, cut and fix 12mm semi-WP IS:303 ply circular seat disc,

168.00 Dia 400mm, for Removable stools (Red), spec. as item 7.1. 13.00 Nos 232.3

Supply and fix high-density U-foam cushion, 40 kg/m³ density,

75mm thick, circular Dia 400mm top disc with 75mm height edge

169.00 wrap, glued with PU adhesive, for all stools (Fixed and 23.00 Nos 515.1

Removable), complete in all respects.

Quoted per stool

Supply and fix upholstery fabric (PU Leather/Rexine, min 0.8mm

thick, colour as approved) over U-foam and ply seat disc,

covering top face, wrapping 75mm down foam sides, tucking

170.00 50mm under seat, stapled and contact-adhered, complete in all 23.00 Nos 429.25

Eff. Dia 650mm | Area: π×0.325²=0.3318 sqm/stool × 23 =

sqm | Quoted per stool

Supply, bend to Dia 400mm, butt weld and grind smooth 25×4mm

IS:2062 MS flat bar as circular seat ring (below ply disc) for 176.75

Removable stools (Red) only.

π×0.400=1.257m/stool × 13 stools = 16.34m

Supply, bend to Dia 400mm, butt weld and grind smooth 25×4mm

IS:2062 MS flat bar as circular base foot ring for Removable stools 176.75

π×0.400=1.257m/stool × 13 stools = 16.34m

Supply, cut and weld 12mm dia IS:2062 MS solid round bar as

stool legs, 4 nos per stool, each 450mm high, welded to seat ring

173.00 and base ring, welds ground smooth, for Removable stools (Red) 23.40 Rmt 227.25

4 legs × 0.450m × 13 stools = 23.40m total

Supply and apply powder coating (electrostatic spray,

thermosetting polyester, 60-80 micron DFT, colour as approved) to

complete MS frame of each removable stool (2 flat rings +

174.00 round bar legs), including surface preparation (degreasing, 13.00 Nos 343.4

phosphating), powder application, oven curing at 180°C,

Frame SA/stool: rings 0.0628 + legs 0.0679 = 0.1307 sqm ×

stools = 1.699 sqm | Quoted per stool

Providing and applying two coats of Indigo Platinum Series Floor

Coat Emulsion (Premium Exterior Floor Coating) including cost of

all labor, materials, surface preparation, primer coat, tools,

scaffolding, and equipment complete as directed by Engineer-in-

Charge. Specifications: • Premium exterior floor coating for

driveways, walkways, terraces, podiums, and exterior tiles. •

Features: High abrasion resistance, strong adhesion, durable semi-

gloss finish, anti-skid properties, superior resistance to algae &

fungus, high washability, long-lasting color retention, UV

resistance. • Application includes thorough cleaning of surface,

crack filling, primer/sealer coat, and two uniform coats of

emulsion by brush/roller/spray. • Shade: As approved by

Engineer-in-Charge. Measurement: Payment shall be made on

actual finished surface area measured in Sq. Mt.

Providing, supplying and fixing MANGLOR TILE on sloping slab of

Club building & Yoga Hall in cement paste/ Chemical as 274.72

approved , including necessary vatta, curing etc. complete. As

directed by Architect and EIC.

Reading Chair-Providing and supply The chair pipe structure of MS

CRCA finish 16 gauge round pipe having a diameter of 32 mm, the

understructure frame tubular structure with stability for proper

balance, the seat and back is supported on spring structure, the

177.00 backrest armrest and seat dimensioned and curved from an 3.00 EACH 11615

ergonomics point of view, the frame and spring-seat structure

prepared from MIG welding process & powder coated, proper high-

density rubber bush provided at all four legs, seat & back

upholstered with fabric.

178.00 JCB machine rental work at the site of excavation or cleaning 16.00 HOUR 1414

179.00 Water conection with necessary fitting 1.00 JOB 2020.00

180.00 Drainage conection with necessary fitting 1.00 JOB 2020.00

Takti for Inauguration with naming as directed by architect or EIC.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete. Cat III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

183 type erected on PVC / Metallic/Wooden box, single 15.00 Pt. 742.35

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete.Cat

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

184 covered with appropriate front plate modules erected on / in 31.00 Pt. 823.15

wall / ceiling as per pipe erected with following type of

accessories.[II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board.(f) with medium class

Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat III.

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden

185 box, single mounting base frame covered with textured / 35.00 Pt. 283.81

metallic/white front plate modules erected on / in wall /

ceiling with following type accessories. Cat III.

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

186 , modules erected with necessary connections as per site 45.00 Each 347.44

situation directed by Engineer In charge(13)

6A/10A/16A/20A/25A/32A Single pole Modular MCB Switch.

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB

Providing & laying approved make ISI marked HDPE 6Kg / cm2

(Class-3) as per IS:4984:1995 PE-80 to be erected at road

crossing on or floor as directed for laying of cable. The pipes as

following size of dia & weight per 6 mtr.(b) 50 mm inner dia

Supplying and erecting Flexible PVC insulated multi strand multi

189 core 1.1 kv grade ISI marked copper wires of following size to be 625 Rmt 197.96

erected as directed.(k) 4.00Sq.mm 4 core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of

following size of cables(C) 4 core 10 Sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

191 on wall/ceiling, with 1.5 sq. mm copper conductor FRLS 1850.00 Rmt 68.68

PVC insulated stranded wire of green colour for earth

continuity of following size (A) With medium class Rigid

PVC pipe and accessories(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

192 on wall/ceiling, with 1.5 sq. mm copper conductor FRLS 800.00 Rmt 90.90

PVC insulated stranded wire of green colour for earth

continuity of following size(A) With medium class Rigid PVC

pipe and accessories(b) 2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in /

on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

following size (a) with medium class Rigid PVC pipe and

accessories(a) 2 wire 4 sq. mm

supplying and erecting sheet steel powdercoated cable and

termination box to be mounted on top or bottom of the

194 m.b.b.distribution box for housin/ covering extra wires and cables 4 each 939.3

suitable for followingsize of m.c.b. db box. Three phase double

12way double door.

S.I.T.C. submersible pump set suitable for bore of 100 mm. dia. or

more having three phase motor capacity not more than 5 H.P.

195 with following capacity . Lifting and Lowering taken extra. (A) (25 1.00 each 40713.1

stage) 120 to 125 LPM discharge at 155 to 120 mtrs. head

respectively suitable for 50 mm dia. delivery pipe

Supplying and erecting Direct on line starter with 30 Amp.

(resistive @ 230v) power relay and with 2 to 5/ 4 to 10 / 8 to

amp. Range C.T. Operated electronic overload relay in

engineering grade plastic enclosure for 3 ph 415v 50 HZ A.C.

motor up to 7.5 HP with high voltage protection (above 480 v) and

196 under voltage protection (below 330 v) current sensing single 1.00 each 2557.32

phasing protection. Reverse phasing protection, inverse current

characteristic overload protection with indication for On, OL,

HV,LV SPP in a single unit with feather touch start / stop push

button, high temperature with standing Bakelite terminals

complete erected on P.W. Block with necessary connection.

Supplying & erecting in earthpit of minimum bore dia. 225mm size

ASH or approved make Safe Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant

197 ohmic value surrounded by highly conductive compound with 5.00 each 12498.75

high charge dissipation suitable for panel earthing.[A] For

electrical installation up to 440 V (c) For Electrical Installation

covering Transformer Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System(like Automation, SCADA)

i.e independent Earthing in normal soil. Length of Pipe : 2.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Providing one bag of 25 Kg. Additional Back Filling Compound

(BFC) suitable for safe earthing device.

Providing and erecting Pipe type earthing having 150 cms.long

and 2.5 cms. dia. galvanised iron pipe with coupling and buch 150.00 434.3

buried in specially prepared earth pit complete with necessary

SWG earth wire.

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on

200 3 phase and neutral 415V,50Hz. having characteristic of quick 10.00 each 3110.8

action & tripping with all advance feature & do not incorporate

any electronic component for following Max. rating erected as

directed. (ii) 40Amps. FP Cat. III

providing and erecting Mains with ISI marked electrolyte stranded

copper conductor, Non PVC Zero Halogen free fire retardant

201 insulated copper conductor, insulated wire (HRFR) conforms to IS- 150.00 RMT 66.66

694, erected in existing pipe with 1.5sq. mm copper conductor of

same specifications for earth continuity of following size. (a)

core 1.5 Sq. mm

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA and

Short Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed. 100 Amps FP (100

mA Sensitivity) cat III

Supply, Installation, Testing and Commissioning of suitable sweep,

BEE 5 Star rated, Ceiling fan with Brush Less Direct Current

(BLDC) permanent ferrite magnet Motor, class of insulation:

B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle

kit with earthing provision, 22 gauge copper winding, Power

factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air

delivery minimum 215 CMM, 350 RPM,230v (tolerance as

205 per IS : 374-2019), THD < 10%, remote or electronic 10.00 EACH 3403.7

regulator unit for Speed Control and all remaining

accessories including safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.), suitable for 140 to

285 Voltage and rectifier circuit with surge, over current and

overload protection , 50 Hz, Single phase AC Supply, earthing

etc. Complete as required.[ Make shall be approved by

Engineer in Charge] B) 1200 mm Sweep (48")

Supply, installation, testing and commissioning of LED Post Top

Fixture of model OGL-GR / Y-LGTP0 / 4X028XW, complete with

Watt Power LED fitting suitable for outdoor lighting application,

mounted on 2.5 Meter long GI decorative pole with all necessary

accessories such as base plate, foundation bolts, clamps,

brackets, internal wiring, connector, hardware, earthing

arrangement, junction box, nuts & bolts etc. including civil

foundation work, erection, fixing, testing, commissioning and all

labour charges complete as required at site.Supply, installation,

testing and commissioning of LED Post Top Fixture of model OGL-

GR / Y-LGTP0 / 4X028XW, complete with 28 Watt Power LED fitting

suitable for outdoor lighting application, mounted on 2.5 Meter

long GI decorative pole with all necessary accessories such as

base plate, foundation bolts, clamps, brackets, internal wiring,

connector, hardware, earthing arrangement, junction box, nuts &

bolts etc. including civil foundation work, erection, fixing, testing,

commissioning and all labour charges complete as required at

site.make-jaquar

Supply, installation, testing and commissioning of LED Ring Gate

Top Fixture of model OGL-GR / Y-LGTP0 / 7X040XW, complete with

40 Watt Warm White (WW) LED Ring Gate Top Light, 400 mm dia.,

suitable for outdoor decorative lighting application, mounted on

suitable 2.5 Meter long GI pole with all necessary accessories

207 such as mounting brackets, base plate, foundation bolts, clamps, 27.00 EACH 15352

internal wiring, connectors, hardware fittings, earthing

arrangement, junction box, nuts & bolts etc. including

excavation, concrete foundation, erection, fixing, testing and

commissioning complete with all labour, transportation, tools &

tackles as required at site.

Supplying and erecting 10W LED BULKHEAD WARM WHITE included

208 nessasory fitting and labour etc complate As directed by 27.00 EACH 1292.8

Engineer incharge

Supplying and erecting 10W BOLLARD VARTICAL CONE WARM

209 WHITE included nessasory fitting and labour etc complate As 37.00 EACH 3585.5

directed by Engineer incharge

Supplying and erecting 12W SPIKE PROJECTOR 3000K IP65 15 ' AC

210 220 included nessasory fitting and labour etc complate As 8.00 EACH 38279

directed by Engineer incharge

Supplying and erecting 18W SPIKE PROJECTOR 3000K IP65 18 '

211 included nessasory fitting and labour etc complate As directed 11.00 EACH 39693

by Engineer incharge

Supplying and erecting 18W NERO SURFACE ROUND LED COOL

212 WHITE (LNRO02R024SC) included nessasory fitting and labour etc 50.00 EACH 1540.25

complate As directed by Engineer incharge

Supplying and erecting OTC PRIMA HD LED BULB 12 W DRIVER ON

213 BOAR included nessasory fitting and labour etc complate As 12.00 EACH 227.25

directed by Engineer incharge

Supplying and erecting 15W CYLINDRICAL PENDANT LIGHT 6500K

214 included nessasory fitting and labour etc complate As directed 15.00 EACH 2398.75

by Engineer incharge

Supplying and erecting 20W LED GLAZE TUBE LIGHT COOL WHITE

215 included nessasory fitting and labour etc complate As directed 5.00 EACH 580.75

by Engineer incharge

Supply & Fixing of 10W LED Filament Smoky Lamp (Product Code:

ADE-WHT-HP140SMK) with E27 base, 2700K warm white light,

216 decorative smoky glass finish, size 210×140 mm, complete with 30.00 EACH 303

holder, connection accessories, testing & commissioning etc. as

Providing and fixing exterior façade lighting using LED profile strip

of 12–14 W per metre capacity, having warm white light (3000K),

mounted in aluminium profile with diffuser, suitable for all-side

elevation illumination, complete with required 24V driver,

217 connectors, internal/external wiring, fixing accessories, including 15.00 RMT 4040

necessary scaffolding, labour, handling, installation at all heights,

testing and commissioning, ensuring uniform linear lighting effect,

with IP65/IP67 protection for outdoor use, all complete as directed

by Engineer-in-charge.

Supplying & erecting approved make low noise decorative

218 exhaust fan having square frame ABS body with inbuilt lowers & 10.00 EACH 2009.9

square frame.200mm with 1350RPM Cat.II

Point wiring for independent PLUG with following size mains earth

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires upto 10 mt length, in

following below of pipe erected complete with ISI marked 3 /

Pin socket and tissino type switch erected with earth continuity

connection erected on Metal / PVC/Wooden box covered with

mm thick PC(Polycarbonate) / Acrylic/Laminated sheet. [C]

6/16A Plug and 16 A switch with 2-4 sq.mm Cu. Mains with

sq.mm ( green) earthing wire(a) with medium class Rigid PVC

pipe and accessories erected flushed on wall/ceiling complete

Providing and erecting approved make split air-conditioning unit

consisting of copper condensing unit with fan motor, hermetically

sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its

accessories by means of extra supplied proper insulated copper

tubing,drain PVC pipes suitable for ( cost includes powder coated

Stand, Eco Friendly green gas charging, 15A plug top & Remote

Control) with necessary core cutting. 2 Tonne. Note :- Premium

category:O-General, Mitsubishi electric (1) For ISEER Range

(KWH/KWH) (C) FOR 2 ton capasity

Providing and erecting busbar chamber confirming to IS-375

fabricated from 16 G.M.S. sheet, dust & vermin proof having

hinged door with rubber gasket and necessary busbar supports

with Aluminium busbar having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly wrapped

with colour insulation tape for phase sequence, three phase &

neutral each Suitable for following current capacity with

necessary painting mounted on wall or pedestal frame of

required size with necessary connections.(D) Suitable for

Providing and erecting Sheet Steel powder coated Vertical

MCB distribution board (VTPN) - flush / surface mounted

double door (IP54) fitted with insulated copper busbar,

isolated neutral link, earth bar and DIN rail, confirming to IS

13032 and BS 5486-1986,IP-54 suitable for 250 AMP TPN

MCCB + RCCB as incomer and three phase outgoing as per

following .(The DBs should be used of same company of MCB

to be used) (D) 12 way outgoing

Solder less crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool

223 & connected to switchgear terminals with brass/cadmium plated 30.00 EACH 8.08

nut bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm for

Providing, supplying, installing, testing and commissioning of P4

Outdoor LED Video Wall of size 2.62 m x 4.19 m (approx.

sq.ft) with MS cabinet structure, complete outdoor weatherproof

system including SMD1921 LED modules (320×160 mm), pixel pitch

4.0 mm, module resolution 128×64, screen resolution approx.

200×320, brightness ≥4500 nits, 16-bit grey scale, refresh rate up to

7680 Hz, scan 1/13, viewing angle ≥140° (H/V), minimum viewing

distance 4 m, life span ≥100,000 hours.

System complete with Colorlight/Haida sending card & video

processor, LED Art software, standard power supply, data & power

cabling, connectors, structure fabrication, installation, scaffolding,

transportation, testing & commissioning, and all accessories

required for complete functioning as per site requirement and

Engineer-in-Charge

Supply, Installation, testing and commissioning of Computer

System with UPS system for Surveillance and Monitoring - Pentium

Core i5 with up to 4.70Ghz CPU speed, minimum of 8 GB RAM, up

to 24MB cache, 52X32X52X CDRW Drive & 2TB HDD, optical

Mouse, 106 keys keyboard,Mouse, 2 nos. 10/100 Mbps Ethernet

card ,USB connection & internal modem, 17" colour graphics TFT

monitor & Original Windows 11 and anti-virus software loaded.

(Dell/Lenovo/HP)

SITC of 4 Megapixel up to 20 meter IR IP66 ,Varifocal ,Water Proof

outdoor type Bullet IP netwrok Camera : Up to 4 megapixel high

226 resolution Full HD1080p video Dual stream with 4mm lens - 3D 25.00 EACH 5555

Digital Noise Reduction3-axis adjustment DC12V Support H.265+

with all required acceesories.

Supply, Installation, Testing & Commissioning of 32 port NVR

Supply, Installation, Testing & Commissioning of 64 port NVR

Supply, Installation, Testing & Commissioning of 48 CH port POE

Supply, Installation, Testing & Commissioning of 24 CH port POE

Supply, Installation, Testing & Commissioning of 16 CH port POE

Supply, Installation, Testing & Commissioning of 08 CH port POE

Supply, Installation,Testing & Commissioning of 08 TB Hard Drive

Supply, Installation,Testing & Commissioning of 42U Floor Mounted

Rack With Required Accessory. Outdoor or Indoor

Supplying & erecting approved make LAN cable of following size

in existing pipe as per direction [C] CAT -

236 Supply and Installation of HDMI CABEL. 15.00 RMT 121.2

237 Junction box for CCTV Camera 25.00 NOS 277.75

Supply, Installation, Testing & Commissioning of LED Monitoring

Screen 43/50 inch LED Monitor

Supply, Installation, Testing & Commissioning of RJ45 Connector

Supply, Installation, Testing & Commissioning of Patch Cord

Supply, Installation, Testing & Commissioning of 24 Port Patch

Supply, Installation, Testing & Commissioning of Cable Manager

Horizontal Cable Manager

Supply, Installation, Testing & Commissioning of Power Distribution

Unit (PDU)Rack Mounted PDU

PVC Conduit 25 mm Heavy Duty PVC Conduit for CCTV cabling