REPAIR TO JOINERY, WINDOWS, DOORS OF CERTAIN OTM AND MD ACCN AND INSTALLATIONS INCVLUDING REPAIR TO FENCING HARD STANDING, PARKING, FOOTPATH AND OTHER MISC STRUCTURE AT MIL STN BANBASA UNDER GE PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed

M & L for 75mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L for rubber moulded precast concrete colour interlocking paver block of 60 mm thickness of M-35 grade conforming to IS - 15658-2006 with grey cement and pigment complete all as specified and directed.

M & L for sand cushioning under floors including watering as required complete all as specified and directed.

M & L for rubber moulded coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick, bedded over and including screed bed 15mm thick in CM(1:6) set and jointed in neat cement slurry and pointed in white cement and pigment complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs, coping, benching etc including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed.

S & F 75mm dia PVC (SWR) pipe in any length laid in floor for weep holes complete all as specified & directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specially provided for and removing materials from site of work complete all as directed

M & L 40 mm thick cement concrete type B1 (1:2:4) using 20mm graded stone aggregate finished surface even and smooth with out using extra cement as specified and directed.

S & F 3mm thick glass dividing strips 38 mm wide, fixed in postion for laying PCC flooring complete all as speciified and directed.

M & L for 25mm thick cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate all as in flooring complete all as specified and directed.

M & L 75mm thick cement concrete type C1 (1:3:6) using 20mm graded aggregate as in path, plinth protection finished surface even and smooth with out using extra cement all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete, masonary etc and making good the disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface.

M & L for Plain Cement Concrete Type C2 1:3:6 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M & L for providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100sq. cm but not ec 250sq. cm. with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed including formwork, foundation base of RCC post and fixed complete all as specified and directed.

M & L for TMT steel bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

M & L for TMT steel bars of 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

M & L for TMT steel bars of 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

S & F of galvanized, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S & F in repair of galvanized, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S & F angle iron or flat iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only chain link MS galvanised fencing any size and type all as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc, including provision of binding wire all as directed.

S & F of mild steel round bars 10mm dia Fe-410-W (Gde.E-250) Part- I quality-A or Fe 290 (Gde - E-165), cut to length, bent to shape required, including cranking, hooking ends or securing with clips all as specified and directed.

S & F of mild steel screw bolts (machine made) of 5 to 10mm neck diameter and not exc 5cm long with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut all as specified and directed.

S & F of framed work as in doors or gates of angle or other section of grade Fe 410-W (Gde- E- 250) quality- A with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including dismantling of old gate, door complete all as specified & directed.

M & L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified & directed.

Taking down chowkats or frames with shutter(without taking off shutter from the frame) area not exc. 1.5 sqm and making the surface of brick wall good plastering, around the opening complete all as specified and directed

Taking down chowkats of any description without taking off shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each and making the surface of brick wall good plastering, around the opening complete all as specified and directed

Taking down shutters of any description area not exceeding 1 sqm and removing from site all as specified and directed.

Taking down shutters of any description area exc 1 sqm and not exc 2 sqm all as specified and directed.

Resecuring or easing & adjusting shutters of any description without taking down all as specified and directed.

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube 47x47mm (19 gauge) all as specified and directed.

S & F factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either sides & as gap insert for top- rail and bottom rails. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

S & F 100 mm long medium weight, cold rolled stainless steel Butt hinges with steel screws complete all as specified and directed.

S & F 150 mm long Aluminium alloy D type handles, cast type, anodised complete all as specified and directed.

S & F 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

M & L II class hard wood plain solid straight chowkats and frame wrought, framed rebated on the solid put together with glue, pinned at joints and fixed in position complete all as specified and directed.

S & F 30 mm thick flush door shutter solid core construction with block board core and plywood face panels commercial type on both side including teak wood lipping 6mm thick fixed with nails complete all as specified and directed.

S & F of 35mm thick IInd class hardwood framed panelled shutters (two number of panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size as per IS 1003 kiln seasoned and chemically presure treated all as specified and directed.

M & L for 30mm thick 2nd class hard wood glazed shutter divided into square with plain,chamfered or rounded mitered and rebated sash bar any numbers, fitted with cut and mitred beads for securing glass etc and fitted to chowkat all as specified and directed.

M & L for 30mm thick 2nd class hard wood wire gauged shutter open rebated prepared to recive glass,gauze etc with out sash bars chamfered or rounded fitted with cut and mitred beads for security glass etc size of members of shutters as specified and fitted to chowkhat all as specified and directed.

S & F mild steel Butt hinges of medium weight and fixed 100mm all as specified and directed

S & F mild steel Butt hinges of medium weight and fixed 75mm all as specified and directed

S & F aluminium anodised barrel tower bolt 100mm extruded section all as specified and directed.

S & F aluminum anodised sliding door bolt 250mm fixing with bolt and sliding bolt of extuded section all as specified and directed.

S & F 125 mm long Aluminium alloy D type handles, cast type, anodised complete all as specified and directed.

S & F sheet glass of 3mm thick ordinary quality glass and glazing with oil putty in square n exec 0.5 sqm in each pane complete all as specified and directed..

Hacking out old broken glass (any thickness size quality and discription) for wooden frame fixed with wooden beads or from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S & F of Stainless Steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and direceted.

S & F in repair of Stainless Steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and direceted.

S & F Block board grade 2 quality interior grade commercial type 25 mm thick for cup board shutter all as specified and directed.

S & F in repairs 19 mm thick ply wood grade BWP type BB fixed with screw with timber frame work for cupboard shelves including 19 mm wide x 6mm thick teak wood lipping fixed with nails complete all as specified and as directed.

S & F aluminium anodised hasp and staple 100 mm safety type with stainless steel pin fixed with screw good quality in any position all as specified

S & F in repair Stainless Steel curtain rods 25 mm dia with bracket and ends etc complete all as specified and directed.

S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified

S & F small fitting such as brackets, latch and hinge block shaped door and window stops and like including necessory labaours articles not exc 200 cu cm of Ist Class hardwood each all as specified and directed.

S & F mild steel work in framed work such as grills, gratings, framed guard bars, ladders etc with end of bars shouldered and or riveted, or forged into spikes and similar works conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&f Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&f Anodised aluminium door shutters, aluminium section weighing not less than 1.052 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&f Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&f Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S/F mortice lock vertical type bars 100mm size 4 levers all as specified and directed.

Dismantling timber scantling 40 Sq. cm. and over framed work in any position.

S & F II classs hard wood timber scantling clean sawn framed and fixed in any position and direction complete all as specified and directed.

S & F of rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides fixed with angle cleats or other connecting plates conforming to Gde Fe-410 W complete all as specified and as directed.

Dismantling of AC corrugated, semi-corrugated sheets in roof coverings & ridges.

S & F of pre-painted galvalume aluminium zinc coating GI base corrugated steel sheet 0.50 mm thick wave tile pattern of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F of pre-painted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge of roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs walls etc fixed with `L` or `J` hooks complete all as specified and directed.

M & L 6mm thick asbestos cement two pieces adjustable plain wing ridge 6mm thick fixed with J type bolts all as specified and directed.

Demolition of brick work /stone work built in cement mortar all as specified and directed.

M & L brick work built in CM (1:6) with old sized sub class B bricks straight or curved on plan exc 6m mean radius all as specified and directed.

Taking down cement plaster from brick/stone masonry walls/ceilings etc including racking out joints hacking for keys and scrubbing down with water etc complete all as specified and directed.

M & L 15 mm thick rendering in cement mortar 1:6 on fair face of brick wall surfaces finished the surface even and smooth with out using extra cement complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:4 on other than fair faces of brick walls finished the surface even and smooth with out using extra cement complete all as specified and directed.

M&L rendering 5 mm thick in CM 1:4 on fair face of ceiling finished the surface even and smooth with out using extra cement complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M & L preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of primer red oxide zink chrome including preparation surfacescomplete all as specified.

M & L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M & L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm as in flooring, laid over and including 15 mm thick screen bed in CM(1:6), set and jointed ini neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M & L for glazed ceramic coloured wall tiles 300x200x7 mm including bedded and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tile over 10 mm thick rendering in CM 1:4 all as specified and directed.

M & L for glazed ceramic coloured wall tiles 300x450x7 mm including bedded and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tile over 10 mm thick rendering in CM 1:4 all as specified and directed.

M & L for Vitrified tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 15mm thick screed bed in cm 1:6 complete all as specified and as directed.

M & L for Vitrified tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in vertical surface etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed

Supply, hoisting and fixing in repair rotational moulded PVC water storage tank, 500 litres capacity conforming to IS-12701 (1989) cylindrical vertical type multi-layered with closed top including inlet, PVC float ball valve 20mm and necessary fittings outlet and wash out holes of approved make including dismantling or existing tank of any description and removing from site of work complete all as specified and as directed.

S & F in repair 15mm float ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe with nesessory fittings and fixed in any position (minimum weight - 210 gms) all as specified and directed.

S & F in repair 20mm float ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe with nesessory fittings and fixed in any position (minimum weight - 210 gms) all as specified and directed.

Cleaning and removing all scale and dirt etc, from existing water tank Exc 250 & N.exc 500 litres capacity and from mouths of circulating pipes etc up to 2 storey bldgs all as specified and directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store all as specified and directed.

Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store all as specified and directed.

S & F G I tubing medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors bore of tube 15 mm all as specified and directed.

S & F G I tubing medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors bore of tube 20 mm all as specified and directed.

S & F in repair 15mm bore dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs 15 mm bore fancy type chromium plated bib taps brass with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair fancy type 15mm dia stop valve copper alloy with chromium plated fixed to iron pipe all as specified.

S & F in repair fancy type 15mm dia angle stop valve CP copper alloy with chromium plated fixed to iron pipe all as specified.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S & F in repairs Vitreous China Ware Wash hand basin coloured, flat back, size 550x400mm including cutting for and pinning ends of brackets including PTMT waste coupling and PVC waste pipe 32 mm dia and PVC connection 450mm long with PTMT nuts and fixed on a pair of CI cantilever bracket of appropriate size complete all as specified and directed.

S & F in repairs PVC connection for 15mm size pipe 450 mm long with PTMT nuts complete all as specified and directed.

S & F in repairs towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden or plastic cleats all as specified and directed

S & F in repair 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight - 90 gms) all as specified and directed.

S & F in repair 15mm stop valve standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight - 90 gms) all as specified and directed.

S & F in repair 15 mm pillar tap of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight -110 gms) all as specified and directed.

S & F in repair 15 mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight - 90 gms) all as specified and directed.

S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 580x440 mm size white with integral foot rest with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern) including providing new flush pipe complet all as specified and directed.

S & F in repair PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 bowl size 410mm x 330mm x 160mm fixed complete all as specified and directed.

S & F in repair stainless steel sink made of stainless steel 1.0mm thick for kitchen with plugs, washers, waste coupling and waste pipe including fixing with cantilever brackets and connecting union to pipe of over all size 495mm x 420mm, bowl size 410mmx330mmx160mm complete all as specified.

Uprooting of vegetation growth from walls, roof chajja, gutter cleaning the surface and making good holes with cement mortar (1:3) each hole not exceeding 0.10 sqm rate include up to II stories all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) all as specified.

S & F of PVC (SWR) 110mm dia rain water pipe single socket any length with rubber rings joints fixed to walls complete all as specified and directed.

S & F of PVC (SWR) 110mm dia bend any radius including cutting brick wall / concrete and making good the disturbed surfaces complete all as specified and directed.

S & F of 32 mm low density polyethylene (LDPE) pipes 0.75 mtr in length and of pressure rating 6 Kgf/sqm for waste pipe all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.

S & F of suspended ceiling system of grid/section size 600x600mm comprising of GI powder coated main 39x24x0.8 mm thick ( thickness comprising of GI/0.40+PPGS/0.3) cross Tee 29X24X0.8 MM thick and wall angle 22.2x22.2x0.65 mm thick with and including 4 mm thick E-board false ceiling tiles to be placed in the grid system duly suspend with 6 mm dia GI wire hangers fixed with steel dash fasteners or from purlin of the roof with clip complete all as specified and directed.

M & L of 4mm thick AC Sheet plain building boards fixed to timber frame, MS frame work with screw in ceiling including all as specified.

M & L 2nd class hard wood plain fillets square or rectangular insection of cross sectional area exc. 13 Sqcm but not exc. 25 Sqcm secured with nails or screws complete all as specified and directed.

R K CONSTRUCTION

Pushkar Dutt Bhatt

NIN & COMPANY

SURYA CONSTRUCTION

M/s D K Sharma

Shri Siddhi Vinayak Constructions