REPAIR AND MAINT OF LT ELECTRIC SUPPLY, ALLIED WORKS, STREET LIGHT FITTINGS, FOUNTAIN LIGHTS, DOME LIGHTS, BUILDING SECURITY LIGHTS AND FOCUS LIGHTS AT SWAC VSN GANDHINAGAR UNDER GE (AF) CHILODA

Amount

Excavation in trenches not exceeding 1.5m width and not exceeding 1.5m in depth and getting out in soft/loose soil for taking up/ laying cable/ pipe etc. complete all as specified and as directed.

M&L for dry sand cushioning to underground cable with screened, washed river sand, including punning gently complete all as specified and as directed. Note:- Thickness after punning will be measured for payment.

Supply and lay burnt brick sub class `B' old size in trenches abouting each other width equal to length of brick etc complete all as specified and as directed.

Returning, filling including spreading, leveling watering & well ramming in laying not exc. 25cm thick for soft/ loose soil complete all as specified and as directed.

Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point for soft/ loose soil complete all as specified and as directed.

Laying only burnt bricks (old size) retrieved from Item Nos. 9,10 and 11 here-in-after laid in trenches as cable protection complete all as specified and as directed.

Labour only for boring under road/ drain by manual method for inserting the light grade pipe GI tubing up to 50mm dia for cable protection complete all as specified and as directed by Engineer-in-Charge.

Supply and laying in trenches in road cross/ floors 40mm bore tube galvanished iron light grade with all fittings for protection of cable complete all as specified and as directed.

Supply and laying in trenches in road cross/ floors 50mm bore tube galvanished iron light grade with all fittings for protection of cable complete all as specified and as directed.

Taking down/ out underground cable of aluminium conductor of 10 to 35 Sqmm of any core after disconnecting from sheet metal encloser/ panel board or pole complete all as specified and as directed.

Taking down/ out underground cable of aluminium conductor of 50 to 95 Sqmm of any core after disconnecting from sheet metal encloser/ panel board complete all as specified and as directed.

Taking down/ out underground cable of aluminium conductor of 120 to 300 Sqmm of any core after disconnecting from sheet metal encloser/ panel board complete all as specified and as directed.

Supply and laying XLPE insulated PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor 1100 Volt grade of size 16 Sqmm, 2 Core laid in trenches/ passing through pipe/ duct or fixed on pole and connecting and testing complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.

Supply and laying XLPE insulated PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor 1100 Volt grade of size 16 Sqmm, 4 Core laid in trenches/ passing through pipe/ duct or fixed on pole and connecting and testing complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.

Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 25 Sqmm, 4 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.

Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 35 Sqmm, 3.5 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.

Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 50 Sqmm, 3.5 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.

Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 70 Sqmm, 3.5 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.

Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 95 Sqmm, 3.5 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.

Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 120 Sqmm, 3.5 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.

Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 150 Sqmm, 3.5 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.

Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 300 Sqmm, 3.5 Core complete all as specified and as directed. Note:- Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.

S&F in repair 2.5 Sqmm, 3.0 Core PVC insulated, unsheathed multistranded copper conductor flexible cable 1100 Volts grade from junction box to street light fitting complete all as specified and as directed by Engr-in-Charge.

S&F in repair 1.5 Sqmm, 3.0 Core PVC insulated, unsheathed multistranded copper conductor flexible cable 1100 Volts grade from junction box to street light fitting complete all as specified and as directed by Engr-in-Charge.

Taking down PVC insulated, unsheathed multistranded copper conductor flexible cable of size 1.5 Sqmm and 2.5 Sqmm, 1100 Volts grade from junction box after disconnecting from MCB in PVC Junction box and opening the connections from top of the street light fitting from the pole 09/ 11 mtr hight and from existing building security lights complete all as specified and as directed by Eng-in-Charge.

M&L for opening the existing cable connections from existing junction boxes of street light poles, post top lanterns and building security lights and refixing the same with newly fitted lugs of appropriate size 10, 16, 25, 35, 50, 70 and 95 as the case may be, by opening the existing loop of cable in the roots of street light pole and making the connections new by peeling the insulation with strapper, making proper connections of cable in bus bar of junction box by fixing the new nut bolts/ studs and making flexible wire connection in MCB, MCB should be fixed properly also the junction box covers should be closed in proper manner and fixing the junction boxes on the clamp on the pole by bolts complete all as specifeid and as directed by Eng-in-Charge. Note:- Necessary excavation work for opening the loop and return filling of the excavated material, lugs of appropriate sizes, nut bolts and tape roll box and other associated works will be the part of this Job and no additional cost will be paid to the contractor, cost of MCB, New Junction boxes, clamps, flexible wire if fitted newly will be paid under respective item of this schedule.

M&L for opening the existing any size of cable connections from existing junction boxes of street light poles, post top lanterns and building security lights and making the connections new by peeling the insulation with strapper, making proper connections of cable with newly fitted lugs in bus bar of junction box by fixing the new nut bolts/ studs and making flexible wire connection in MCB, MCB should be fixed properly also the junction box covers should be closed in proper manner and fixing the junction boxes on the clamp on the pole by bolts including checking of electric connection of LED street light on pole complete all as specifeid and as directed by Eng-in-Charge. Note:- Necessary lugs of appropriate sizes, nut bolts and tape roll box and other associated works will be the part of this Job and no additional cost will be paid to the contractor, Cost of MCB, New Junction boxes, clamps, flexible wire if fitted newly will be paid under respective item of this schedule.

M&L for load balacing at different control panels of street lights at different locations of HQ SWAC Chiloda by proper R, Y, B phase sequencing of the street light fittings so that the load in each phase will be equal and unbalace of load in any of the phase be sorted out the test report before and after balancing will be submitted by the contractor complete all as specified and as directed by Eng-in-Charge.

Taking down of old existing MS Clamp and supply and fix new MS clamps of size 40mm x 5mm in cross sectional area and upto 500mm in length suitable for fixing the PVC Junction boxes to the street light poles and boundary walls as the case may be, including making necessary holes and nuts/ bolts required for fixing the junction box to the poles either steel tubular or PCC pole or at the boundary wall for post top lights complete all as specified and as directed by Eng-in-Charge.

Taking down of old GI Pipe of any size and supply and fixing on street light steel tubular Poles/ PCC Poles/ Walls galvanished iron light grade pipe upto 25mm dia with all fittings for protection of cables hangig from the street lights to the junction boxes complete all as specified and as directed by Eng-in-Charge.

M&L for preparation of old painted surface of steel tubular pole (9/11 meter long above coping) and applying two coat of aluminium paint, making of strip of 20 cm width (sky blue and white in alternate band) upto 1400mm height with one synthetic enamel paint, rewriting pole No by painter with enamel paint, and painting the existing MS clamp with one coat of aluminium paint complete all as specifeid and as directed by Engr-in-Charge.

M&L for preparation of old painted surface of LT RCC pole (up to 6.10 metre height above coping), applying two coat cement base paint, making of strip of 20 cm width (sky blue and white in alternate band) upto 1400mm height with one synthetic enamel paint, rewriting pole No by painter with enamel paint, and painting the existing MS clamp with one coat aluminium paint complete all as specified and as directed.

Supply and paste fluorescent type reflective tape of superior quality width 450mm (three strips, each 150mm wide and 600mm long of colour white, sky blue, white), paste on steel tubular pole on outer circumferences including removing old tape complete all as specified and as directed.

M&L for writting of pole Nos on existing pole with stencil out with white colour in sky blue colour background of 80mm hight around the radius of pole and complete all as specified and as directed by Engr-in-Charge.

S&F in repair to timer switch digital type 24 hours with 15 min and 30 min, 16/ 100 Amp contact rating 230 Volts, AC, 50 Hzs suitable for street lights complete all as specified and as directed by Engr-in-Charge.

S&F 3 pole power contactor type ML AC 3 rating (100 A) Aux Contactors 2NO+2NC compatible with digital timer of suitable capacity complete all as specified and as directed by Engr-in-Charge.

Supply only MCB’s single pole with neutral, 6 to 32 Amps, 230 Volts complete all as specifed and as directed by Engr-in- Charge.

S&F MCB’s TPN, 63 Amps, 415 Volts, fixed in existing PVC box including connecting including taking down of old MCB complete all as specified and as directed.

Supply only PVC box of outside size 350mm x 250mm x 150mm and inside size 300mm x 200mm x 105mm including 4 Nos of bus bar strip of aluminium of size 25mm x 4mm suitable for 440 Volts of suitable amps rating including 1 No MCB SPN, 6 to 32 Amps, 230 Volts complete all as specified and as directed.

S&F LED bulb 15 Watt complete all as specified and as directed by Engr-in-Charge.

S&F PVC MCB DB 2 way with MCB SPN 6 to 32 Amps, 230 Volts, including taking down of old unserviceable DB complete all as specified and as directed by Engr-in-Charge.

Dismantling and taking down of defective/ unserviceable LED street lights fitting and post top lantern/ gate lights, flood lights, building security lights of any type and of any description and capacity from 09/ 11 metre high electric pole and gates complete all as specified and as directed by Engr-in-Charge.

Taking down unserviceable LED bollard light fitting of any Watt, spike lights, fountain lights and LED bulk head light complete all as specified and as directed by Engr-in-Charge.

S&F in repair LED post top lanterns of 40 Watt (cool white/ warm white) rated power and rated CCT 3000 K, IP65 aesthatically designed spun Al spigot for mounting LED Driver and spun aluminium canopy which is painted white inside. Epoxy powder coated matt black finish after phosphochromate treatment, weather proof construction having robust design delivers to meet the landscaping needs, Luminaire type, to be fixed over galvanised pole of daimeter upto 50mm, complete all as specified and as directed.

S&F in repair LED post top lanterns of 45 Watt (cool white/ warm white) rated power and rated CCT 3000 K, IP65 aesthatically designed spun Al spigot for mounting LED Driver and spun aluminium canopy which is painted white inside. Epoxy powder coated matt black finish after phosphochromate treatment, weather proof construction having robust design delivers to meet the landscaping needs, Luminaire type, to be fixed over galvanised pole of daimeter upto 50mm, complete all as specified and as directed.

S&F in repair LED post top lanterns of 25 Watt (cool white/ warm white) rated power and rated CCT 3000 K, IP65 aesthatically designed spun Al spigot for mounting LED Driver and spun aluminium canopy which is painted white inside. Epoxy powder coated matt black finish after phosphochromate treatment, weather proof construction having robust design delivers to meet the landscaping needs, Luminaire type, Opaline, fixed over galvanised pole of daimeter upto 50mm, complete all as specified and as directed.

S&F in repair 150 Watt LED flood light (cool white/ warm white) with pressure die- cast aluminium housing, complete with all accessories, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP 65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc. complete all as specified and as directed.

S&F in repair 100 Watt LED flood light (cool white/ warm) with pressure die- cast aluminium housing, complete with all accessories, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP 65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc. complete all as specified and as directed.

S&F in repair 100 Watt LED flood light multi colour with pressure die-cast aluminium housing, complete with all accessories, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP 65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc. complete all as specified and as directed.

S&F in repair 50 Watt LED flood light multi colour with pressure die- cast aluminium housing, complete with all accessories, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP 65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc. complete all as specified and as directed.

S&F in repair 30 Watt LED flood light multi colour with pressure die- cast aluminium housing, complete with all accessories, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP 65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc. complete all as specified and as directed.

S&F 120 Watt LED street light luminaire new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP 66 road way luminarie with high power LED as light source and electronic driver, minimum pole dia 50mm fixed on existing GI bracket with electric connections with suitable cable complete all as specified and as directed by Engr-in-Charge.

All as per Item No. 52 above but 90 Watt LED street light luminaire complete all as specified and as directed by Engr-in-Charge.

All as per Item No. 52 above but 70/ 72 Watt LED street light luminaire complete all as specified and as directed by Engr-in-Charge.

All as per Item No. 52 above but 60 Watt LED street light luminaire, minimum pole dia 40mm complete all as specified and as directed by Engr-in-Charge.

All as per Item No. 51 above but 25 Watt LED street light luminaire, minimum pole dia 40mm complete all as specified and as directed by Engr-in-Charge.

S&F in repairs square shaped decorative LED bollard light with polycarbonate diffuser, IP 65 of 9 Watt with all accessories prewired fixed with PCC with nut/ bolt on exising location complete all as specified and as directed by Engr-in-Charge.

S&F in repair LED bulk head light 10 Watt environmentaly friendly, ultra moden, energy mounted, surface mounted, decorative hexagon bulk head back-lit LED luminaire comprising of hight brightness LEDs complete all as specified and as directed by Engr-in-Charge.

S&F in repairs decorative (bamboo/ cone type) LED bollard light with opel diffuser & IP 65 protection of 9 Watt with all accessories prewired fixed with PCC with nut/ bolt on exising location complete all as specified and as directed by Engr-in-Charge.

S&F in repairs bush and spike LED light luminaire 1x12 W (cool white/ warm white) having IP-65 protection, with minimum system efficency > 85% made of pressure die cast aluminium housing toughened glass in the front and peanut lens for batwing light distribution with excellent thermal management. The filling should have rated CCT 5000 K complete with all accessories and all as specified and as directed by Engineer-in-Charge.

S&F in replacement LED 12 V, 3X3 W colourful water proof underwater submersible fountain lights in RGB combination of colours, IP 68 complete all as specified and as directed by Engineer-in-Charge.

S&F in repair SMPS (rain proof LED power supply) input supply AC 190 to 260 Volts and out put voltage 12 Volts DC + 5% Out put power 500 Watt complete all as specified and as directed by Engr-in-Charge.

S&F in repairs wire mesh net suitable for bollard light fitting of size 0.4m x 0.4m x 0.65m and all the four corner and top bottom angle iron framing of size 15mm x 15mm x 3mm and wire mesh net wire size 1.4mm dia and wire mess square gap 20mm with four no ring of size 10mm dia and thickness 3.0mm and made 5.0mm hole for inserting the stud size 5.0cm long and 4.0mm thick with suitable size bolt also welded in the bottom outer side for holding the casing including PCC (1:2:4) of 20mm aggregate of size with one coat of red oxide primer and one coat blue colour paint complete all as specified and as directed

M&L for repairing the existing LED bollard light fitting for any type and capacity, taking down the unserviceable LED bollard light and repairing/ replacing the unserviceable parts like drivers, surge protection, internal wiring including PCC foundation etc. and refitting the same with all connection after making serviceable complete all as specified and as directed.

M&L for repairing the existing LED post top lanterns for any type and capacity, taking down the unserviceable LED post top lanterns and repairing/ replacing the unserviceable parts like drivers, surge protection, internal wiring etc. and refitting the same with all connection after making serviceable complete all as specified and as directed.

M&L in repairs for earthing complete with galvanized iron earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to GI strip of size 25mm x 4mm by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20mm bore, galvanised iron, medium grade, and 40mm bore galvanised iron light grade for earth wire protection including all excavation earth work in any type of soil, PCC pit with RCC pit cover charcoal salt, funnel complete all as shown in the electrical plate No. 3 of SSR Part-I and tested on completion complete all as specified and as directed by Engr-in-Charge.

Disconnecting the existing unserviceable MCCB from the cable, taking out from the panel board and supply and fix new MCCB triple pole with neutral, 100 Amps, 35 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc. complete all as specified and as directed by Engr-in-Charge.

Disconnecting the existing unserviceable MCCB from the cable, taking out from the panel board and supply and fix new MCCB triple pole with neutral, 63 Amps, 35 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts bolts and washer etc. complete all as specified and as directed by Engr-in-Charge.

M&L for servicing and repair of printronix brand straight running target type MTST2009 moving target machine including servicing of all components including TGM 301, TGM 302, BSR, plug in relay, brush holder, limit switch, PCCU, LCU, motor winding and all other associated services with the machine like railway track -18 mtrs in length complete all as specified and as directed by Engr-in-Charge.

S&F in repairs digital voltmeter 0-500 Volts of size 96mm x 96mm complete all as specified and as directed by Engr-in-Charge.

S&F in repairs digital ampere meter 0-500 Amps of size 96mm x 96mm complete all as specified and directed by Engr-in-Charge.

S&F in repairs single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed by Engr-in-Charge.

S&F in repairs tripple pole and neutral enclosure with three pin and earth plug and socket complete with one triple pole MCB 63 Amps complete all as specified and as directed by Engr-in-Charge.

S&F in repairs isolator 4 pole, 63 Amps, 415 Volts, 50 Hz complete all as specified and as directed by Engr-in-Charge.

S&F in repairs isolator 4 pole, 100 Amps, 415 Volts, 50 Hz complete all as specified and as directed by Engr-in-Charge.

M&L for servicing and any repair of sliding door motors of Cap 3 HP, operated on 240 V, 50 Hz with replacing of box set-04 Nos, mechanical seal - 01 No, cut off switch - 01 No, bearing - 02 Nos, air filling in tank complete as per site requirement or as directed by Engr-in-Charge.

Dismantling old unserviceable bending/ broken PCC/ steel tubular pole of any size with necessary disconnection of electric wire, demolition of concrete foundation including excavation and earth work as required and removing the same from site complete all as specified and as directed.

S&F steel tubular swaged poles with two coat of aluminium paint ovar a coat of red oxide zinc chrome prime in externally exposed to view portion and black bituminous painting to intenal surface and portion embeded in concrete including making five alternative strips 30 cm wide in different colour above ground level or plinth level incl marking of MES pole No in black paint complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9.00 mtr long) complete all as specified and as directed.

Comprehensive maintenance of sliding doors and repair/ replacement of unserviceable parts like LT control Panels, PCB, sensors and relays, wheels and supproting rollers, sliding door gear boxes, milled gear tooths, wiring, nut, bolts, washer, welding including greasing and oiling of rack and pinion gears and wheels of doors complete all as specified and as directed by Engr-in-Charge. Note:- Rate will be quoted including T&P, Hydra machine etc.

Lowering of high mast light assembly from 12 to 16 mtr high mast and refixing the complete assembly on 12 to16 mtr top after repairing and replacing of light any type/ wattage incl complete dismantling, checking replacement of unserviceable parts and components as required and make the light fittings operational to give rated illumination incl cleaning the acrylic/ glass cover and refixing the same after repair/replacement of spare components complete with necessary electrical connection with two single core 2.5 Sqmm PVC sheathed multistranded copper conductor of required length complete all as specified and as directed. Note:- 1. Spare parts/ components shall be measured and paid separately under respective items. 2. LED flood light shall be measured and paid separately under Item No. 81 of this schedule as 'Supply only'. 3. The greasing of pully, roller, bearing and gear including refixing rope clamp, adjustment of lock, lever etc. deemed to be included in the quoted rate.

Supply only 200 Watt LED flood light with pressure die-cast aluminium housing, complete with all accessories, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP 65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die-cast housing and heat sink in aluminium extrusion and IP 66 protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc. complete all as specified and as directed.

Taking down carefully existing unserviceable LED flood light, any type and any watt from the pole and existing location to carry the necessary repair like electronic driver, LED, surge protection and rewiring the same complete and fixed to existing location including necessary electric connections complete all as specified and as directed.

S&F trailing cable 4 Sqmm, 5 Core copper conductor EPR insulated PCP sheathed cable having current carrying capacity 30 Amp complete all as specified and as directed by Engr-in-Charge.

S&F trailing cable connector and terminal box suitable for 16/ 12 Mtr high mast, make and model as per existing complete all as specified and as directed.

S&F in repairs high mast 3 phase, 415 Volt, integeral motor 2 HP, with one No. isolator 4 pole, 63 Amp, make and model as per existing complete all as specified and as directed by Engr-in-Charge.

Taking down carefully existing unserviceable LED street light, any type and any watt from the pole and existing location to carry the necessary repair like electronic driver, LED, surge protection and rewiring the same complete and fixed to existing GI pipe bracket on pole including necessary electric connections complete all as specified and as directed. Note:- The new electronic driver, LED, surge protection shall be measured and paid separately as supply only under relevant items.

Supply only electronic driver and surge protection suitable for LED street light fitting of 25 to 120 Watt and as per existing fitting complete all as specified and as directed.

Supply only surge protection suitable for LED street light fitting of 25 to 120 Watt complete all as specified and as directed.

Supply only LED suitable for LED street light fitting of 25 to 120 Watt complete all as specified and as directed.

S&F HMI display (main display) for 350 TR Chillar plant at HQ SWAC as per existing size and model A including calibration and taking down complete all as specified and as directed by Engr-in-Charge.

S&F street light bracket made out of 40mm bore GI tubing medium grade 1.20 Mtr long bend to required shape as in bracket for street light fittings fixed with two pair or MS flat iron 40mm x 5mm size and 30cm long clamp of required shape with bolts nuts and washers suitable for steel tubular pole complete all as specified and as directed by Engr-in-Charge.

S&F street light bracket made out of 40mm light grade GI tubing minimum 1.2 mtr ling with suitable adapter to suit the opening of street light on one end alongwith integrated fabricated adapter round cup type with 4 Nos studs on outer side to fix the bracket on top of existing steel tubular pole two way, with necessary MS clamps with one coat of red oxide and two coats of aluminium paint upon fabricated adapter including nut, bolt, washers including taking down complete all as specified and as directed by Engineer–in-Charge.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregates) as in foundation of pole, stays etc. complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in coping of pole etc. complete all as specified and as directed.

S&F lamp holder, PVC/ Polycarbonate type with cord grip cap suitable for pendant fitting including taking down complete all as specified and as directed by Engr-in-Charge.

S&F in repairs mini limit switch (J-Lock, and J-8108 ) ME-8108 Type, 5 Amps 230 Volt, AC as per existing make and model complete all as specified and as directed by Engr-in-Charge.

Fixing only LED garden light, 10 Watt and above with all accessories prewired fixed with PCC with nut/ bolt on exising location complete all as specified and as directed by Engr-in-Charge. Note:- LED Garden Light shall be issued under schedule 'B' free for fixing only.

Fixing only LED street light/ flood light of 50/ 80 Watt fixed on existing GI bracket with electric connections with suitable cable complete all as specified and as directed by Engr-in-Charge. Note:- LED street light/ flood light shall be issued under schedule 'B' free for fixing only.

ARTI CONSTRUCTION

Abhishek Enterprises

Dighard Electricals