REPAIRS TO UPKEEP OF FURNITURE FOR OFFICER MESS(S) AND ITS ATTACHED SINGLE OFFICER DU TRANSIT DU AND OFFICER INSTITUTE (S) UNDER GE(NB) VISAKHAPATNAM.

Amount

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken components of Wooden and Steel Furniture without damaging the remaining serviceable members, furniture and Supplying and Fixing of the same with new components such as Prelaminated MDF Board, Exterior Grade, One side decorative lamination and other side balancing white conforming to IS – 14857, Plywood BWR Grade conforming to IS – 303, Mild Steel Sections, Iron mongery fittings, Builders Hardware, Tapestry Cloth, Foam, Plastic Cane, Cotton / Nylon Newar etc. and Wood Work made of First Class Hard Wood [Teak Wood], seasoned, free from knots and cracks, wrought finished including tightening the joints, pinning, screwing, nailing, wedging, gluing, providing hinges, polishing / painting the entire article with standard workmanship complete to its original shape and size all as shown on drawings, as specified and as directed for following articles: Note: All furniture items shall be painted / polished only after completing all repairs and renewals etc. The furniture shall be repaired / renewed, Painted / Polished on site at Officers Married Accommodation after completion of B / R and E / M Welcome Maintenance works. All materials to be incorporated in the work shall conform to the latest IS Specification. Anti-termite and anti-bug treatment shall be done before polishing the wooden furniture and rate quoted is deemed to be including the same.

ALMIRAH MESS UTENSIL (DRG NO. FD-93)

Shutter 695x515 mm made out of 18 mm thick BWR plywood with lamination, duly fixed with 4 mm thick Teak Wood beading alround.

Shelf 1030x425 mm made out of 18 mm thick BWR plywood with lamination, duly fixed with 4 mm thick Teak Wood beading.

Top/bottom surface 1065x455 mm made out of 18 mm BWR plywood with lamination.

Back cover 1570x1065 mm made out 8 mm thick BWR plywood fixed with screws.

Aluminium handle 100 mm long fixed with screw.

Hasp & staple 100x35 mm fixed with screw.

SOFA SINGLE SEATER (DRG NO. FD-373)

Rear/front leg of teak wood of size 70x35x515 mm as per drg.

Arm rest of teak wood of size 70x 35 x 745 mm as per drg.

Batten of teak wood of size 50x20x585 mm as per drg

Long rail for 1 seater of teak wood of size 100x35x570 mm as per drg

Short rail of teak wood of size 100x35x625 mm as per drg

Short bearer of teak wood of size 40x40x530 mm as per drg

Nylon bushes for legs of sofa chair

Cushion covers (21"x22"x 4") duly stitiched with zip of approved colour and fabric. (Cost of fabric should not be less than Rs 350 per mtr)

Foam cool of size 21"x22" of 100 mm thick density 40 for sofa (Make: Kurlon / Century / Sleepwell) duly provided with white markin cloth and tapestry cloth with Zip.

CHAIR VERANDAH (MESS) (DRG NO. FD-359)

Legs or seat / back rest frames to be chopped-off with hack-saw blade and MS conduit pipe 20 mm dia 16 G (1.6 mm thick) of 120 mm length to fix, duly welded and painted with two coats of synthetic enamel paint over one coat of redoxide primer.

Worn out 20 mm MS tube at leg/frame to weld with spot gas welding to retain stability and apply redoxidde at jointed area

Level the MS surface with stone paper machiner for rough surface and paint the chair with two coats of synthetic enamel paint over one coat of redoxide primer.

Remove u/s worn out cane and weave Mat Pattern new plastic cane of 4 mm wide 0.5 mm thick half-round in white colour including painting with two coats of synthetic enamel paint over one coat of redoxide primer after removing existing paint.

PVC hard shoe cap.

BIN SOLID linen small (CANE) 750 x 450 x 450 (DRG NO. FD-15 / 244)

Legs of 45 mm dia at top, 25 mm dia at bottom and 75 mm high for FD-15

Legs of 45 X45 mm at top, 25 X25 mm at bottom and 100 mm high for FD-244

Short Stiffener joinng legs of size 400 x 19 mm

12 mm teak wood plank of 880 mm x 450 mm to be fixed on leg tops

Vertical members of size 45x45 mm in section

Top rail 45x19 at front and back of Bin

Bottom rail 57 x 19 mm joining vertical members

Ply OST Veneer 6 mm thick front / back (Apprx size 350x730 mm)

Ply OST Veneer 6 mm thick top (Apprx size 450 x750 mm)

6 x 25 mm teak wood edging for Top lid duly polished

S & F MS Butt hinges 75 mm long witH SS srews for openable lid at top

Remove u/s worn out cane from sides and cane with Mat Pattern new plastic cane of 2 mm wide 0.5 mm thick half-round in white colour

CHAIR DINING LONG BACK (OFFICER MESS) (DRG NO. TP / SK-15 )

Rear leg of teak wood of size 30x30x990 mm

Front leg of teak wood of size 50x50x460 mm

Side rail of teak wood of size 25x50x410 mm

Front/back rail of teak wood of size 25x50x370 mm

Side / centrer stiffener connecting for rear/front legs of teak wood of size 25x50x405 mm

Back rest frames of teak wood of size 25x20x500 mm

Back rest Top stiffener of teak wood of size 25x45x380 mm

M & L to tighten the existing triangular corner bits underneath the seat connecting base stiffener

M & L to remove u/s seat cushion and S & F 50 mm coal foam (size 430 x 460 mm) with leatherite cover fixed with screws and fix to seat base stiffener

Nylon shoe bushes

CHAIR DINING OVAL BACK (OFFICER MESS) (DRG NO. TP / SK-16 )

Rear leg made out of teak wood of size 30x30 (bottom), 45x45 (centre) and 50 x 50(top) of length 900 mm

Front leg made out of teak wood of size 30x30(bottom), 45x45 (center) of length 400 mm

Side rail (seat base) made out of teak wood of size 25x 60 x400 mm

Front rail (seat base) made out of teak wood of size 25 x 60 x 420 mm

Back rail (seat base) made out of teak wood of size 25 x 60 x 360 mm

Side / centrer stiffener connecting for rear/front legs made out of teak wood of size 25x25x 420 / 410 mm

Back rest frames made out of teak wood of size 15 x 20 x 440 mm (inside the Oval frame support)

Back rest Top stiffener made out of teak wood of size 25x 60 x 460 mm (curve shaped)

Tighten the existing triangular corner bits underneath the seat connecting base stiffener

M & L to remove u/s seat cushion and S & F 50 mm coal foam (size 430 x 360 mm) with leatherite cover fixed with screws and fix inside the seat base frames

Nylon shoe bushes

CHAIR DINING LONG BACK (TP VISAKHA)

Rear leg made out of teak wood of size 40 x 40 x length 900 mm

Front leg made out of teak wood of size 45 x 45x length 400 mm

Side rail (seat base) made out of teak wood of size 25x 60 x 420 mm

Front/back rail (seat base) made out of teak wood of size 25 x 70 x 420 mm

Side / centrer stiffener connecting for rear/front legs made out of teak wood of size 45 x 25 x 430 mm

Back rest horizontal frames made out of teak wood of size 90 x 25 x 400 mm

Back rest horizontal frames made out of teak wood of size 90 x 30 x 400 mm

Side / centrer stiffener connecting for rear/front legs made out of teak wood of size 20 x 35 x 420 mm

M & L to remove u/s seat cushion and S & F 50 mm coal foam (size 500 x 490 mm) with leatherite cover fixed with screws and fix inside the seat base frames and middle frame underneath the seat

Nylon shoe bushes

CHAIR DINING LONG BACK (MESS) (DRG NO. FD-357 )

Front leg with 25x50x450 mm

Rear leg with 65x50x1200 mm

Side stiffener 25x45x465 mm

Centre stiffener 25x45x450 mm

Seat foam 50 mm thick 32 density size 450x450 mm with leatherilte cover

Back foam 50 mm thick 32 density size 400x650 with leatherilte cover

Nylon shoe bushes

CHAIR EASY CUSHION (OFFICER MESS) (DRG NO. FD-358 )

Seat foam 460 x 525 x 75 mm thick 32 density with soft rexin cover

Back foam 460 x 430 x 50 mm thick 28 density with soft rexin cover

Front leg with 70x25x520 mm

Rear leg 70x25x490 mm (slanting 185 mm horizontal)

Arm rest 65x25 in section and 610 mm long

Nylon shoe bushes

CHAIR WRITING STEEL (CUSHION) (DRG NO. FD-360 )

Seat rest foam 470 x 530 x 75 mm thick 32 density with soft rexin cover

Back rest foam 470 x 180 x 50 mm thick 32 density with soft rexin cover

Arm rest 60 x 25 mm section and 470 mm long

Rubber shoe cap for MS tubular legs

HAT STAND SMALL / LARGE (WITH MIRROR) (DRG NO. FD-361 / 362)

M & L to remove faded mirror and S & F new EPC mirror 5.5 mm thick size 300 x 440 mm with teak wood edging 10x12 mm

M & L to remove back unserviceable ply and S & F new 6 mm BWR size 1000 x 710 mm (small one)

M & L to remove back unserviceable ply and S & F new 6 mm BWR size 1330 x 710 mm (Big one)

M & L to remove u/ser peg set and S & F new SS peg set size 75x120

M & L to remove unserviceable teak wood edging and S & F teak wood egding 35 x 6 mm with headless nail

M & L to remove u/ser F I plate key and S & F one F I picture plate 3 mm thick

M & L to remove front unserviceable OST ply and S & F 4 mm OST BWR size 1000 x 710 mm (small one)

M & L to remove front unserviceable OST ply and S & F 4 mm OST BWR size 1330 x 710 mm (big one)

TABLE DRESSING LADIES (DRG NO. FD-378 )

M & L to remove faded mirror and S & F new EPC mirror 5.5 mm thick size 370 X 1220 mm

M & L to remove unserviceable teak wood edging and S & F teak wood egding 35 x 45 mm with headless nail

M & L to remove back unserviceable ply and S & F new 6 mm BWR size 370 X 1220

M & L to remove botton unserviceable chamber and S & F new chamber made of 18 mm MDF size 380x900x 450 mm alround 3 mm teak wood beeding with two drawers (having 12 mm teak wood at back & sides and 6 mm ply at bottom made to shape 425x160x380 mm) with four hard wood base 60x10 mm size in four base corner

M & L to remove unserviceable sliding glass and S&F new shutters 6 mm thick (Approx 425X160 mm) in existing Aluminium channel at bottom upper space of bottom chamber

M & L to remove back unserviceable knob and S & F SS knobs 40 mm dia

DRESSING STOOL (DRG NO. FD-374 )

M & L to remove unserviceable foam and S & F new cool foam cushion size 380x450 mm of 75 mm thick with tapestry of approved shade

TABLE DRESSING GENTS (DRG NO. FD-379 )

M & L to remove faded mirror and S & F new EPC mirror 5.5 mm thick size 380x760 mm

M & L to remove unserviceable teak wood edging and S & F teak wood egding 25 x 25 mm with headless nail

M & L to remove back u/ser ply and S & F new 6 mm BWR size 380 x 760 mm

M & L to remove unserviceable teak wood batten and S&F new teak wood batten 25x35 of 1090 mm length

M & L to remove botton unserviceable chamber and S & F new chamber made of 18 mm MDF size 900 x 300 x 150 mm alround 3 mm TW beeding with two drawers (having 12 mm TW at back & sides and 6 mm ply at bottom made to shape 425x160x380 mm)

M & L to remove back unserviceable knob and S & F SS knobs 30 mm dia

M & L to remove unserviceable component and S & F following

Prelaminated MDF Top 18 mm thick for Teapoy size (600 x 450 mm) with 4 mm TW edging alround with headless nail. (Drg No. FD-382)

Prelaminated MDF Top 18 mm thick for Top for Teapoy varendah (900 x 450 mm) with 4 mm TW edging alround with headless nail. (Drg No. FD-383)

Prelaminated MDF Top 18 mm thick for Top for Table peg (450 x 300 mm) with 4 mm TW edging alround with headless nail. (Drg No. FD-384)

Prelaminated MDF Top 18 mm thick for Top for Table dining 8 pers (1200 x 1800 mm) with 25x40 TW edging alround with headless nail. (Drg No. FD-376)

Prelaminated MDF Top 18 mm thick for Top for table centre 2 tier size (600 x 1050 mm) with 4 mm TW edging alround with headless nail. (Drg No. FD-393)

ALMIRAH LARGE STEEL / SMALL STEEL (DRG NO. FD-350 / 351 )

M& L to remove old unserviceable locks from Almirahs S & F new 6 lever lock (Size 75 x 50 mm) with duplicate Flat key (2 Nos of key) Make Godrej/Harrison/Link/Bharat of existing size fixed with screw/ spot weld to shutter of almirahs all as specified and directed .

M& L to remove old unserviceable inside box cover of Almirah and S & F new Box cover of size 250 x 120 mm of 1 MM thick MS sheet fixed with screw to shutter of almirahs all as specified and directed .

M& L for Removing old unserviceable 3-way Assembly from Almirahs and supply and fix new assembly including 6mm thick bars round with necessary fittings of approved quality all as specified and directed.

M& L for Removing old unserviceable broken handles from Almirahs and supply and fix new Godrej pattern handle 120 mm length with necessary fittings of approved quality all as specified and directed .

M& L for Removing old unserviceable broken bush between 3 way lock device from Almirahs and supply and fix new brass bush as directed by Engr-in-Charge.

M& L for Removing the unserviceable/rusted bottom sheet from Almirah large steel and supply and fix new bottom made out of 1mm thick MS sheet made to shape and size (950 X 450 MM) as on drawing and fixing by welding matching with existing almirah and painting with two coat of synthetic enamel paint over a coat of red oxide primer and all as specified.

M& L for Removing the existing unserviceable legs from Almirah small/medium steel and supply and fixing the new legs made out of 1.5 mm thick MS sheet size 440 (L) x 100 (H) x 80 (W) and fixed with welding for the bottom portion as per existing size and and painting with two coat of synthetic enamel paint over a coat of red oxide primer and all as specified.

M& L for Removing the existing unserviceable legs from Almirah large steel and supply and fixing the new legs made out of 1.5 mm thick MS sheet size 480 (L) x 100 (H) x 100 (W) and fixed with welding for the bottom portion as per existing size and duly and painting with two coat of synthetic enamel paint over a coat of red oxide primer and all as specified.

M& L for Removing old broken hinges of Almirahs steel and S & F new MS hinges or U clips 70 / 75 mm long duly welded and all as specified and directed by Engr-in-Charge.

M& L for Removing the unserviceable shelves from Almirahs steel & supply and fix new shelves made out of 1mm thick MS sheet made to shape and size ( 440 W x 800 L ) on drawing and fixing with cleats, nuts and bolts all as specified and directed by Engr-in-Charge.

M& L for Removing bented doors shutter (1850 x 465 mm) of Almirahs and bringing the item to the original shape and refixing the repaired door shutters with suitable hinges all as specified and directed.

M& L for Removing the existing dented shelves (450 x 940 mm) from Almirah large steel bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including painting with two coat of synthetic enamel paint over a coat of red oxide primer and all as specified and directed .

BED HARD PLY TOP (DRG NO. FD-213 / 264)

M & L for removing unserviceable Long Rail and S & F new long rail size 1980mmx90mmx35mm made of 1st class teak wood as per drg.

M & L for removing unserviceable Short rail at Foot /Head board and S&F stiffener size 900mmx40mmx60mm made of 1st class teak wood all as per drg

M & L for removing unserviceable battens from head board or Foot Board and S & F Teakwood battens 60x30x840 mm either at top or bottom side connecting one side of legs

M & L for removing unserviceable Vertifcal battens and S& F of new Soft wood battens size 75x22x220 mm equally spaced from each other before connecting Top or bottom battens inside Head board / Foot board as per drg

M & L for removing unserviceable veneer Ply from Head Board at one side and S & F new Veneer / OST Ply 4mm thick BWR Grade size 780 x 340 mm duly fixed with adhesive and headless nails with all edges completely as per drg .

M & L for removing unserviceable veneer Ply from Foot board at one side and S & F new Veneer / OST Ply 4mm thick BWR Grade size 780 x 180 mm duly fixed with adhesive and headless nails with all edges completely as per drg .

M & L for removing unserviceable beading and S & F of 12mm dia half cut beading complete all as shown on drawing and as specified .

M & L for removing unserviceable legs and S & F Teak wood legs of size 60x60 at top and 30x30 at bottom with 660 mm high at Headboard side

M & L for removing unserviceable legs and S & F Teak wood legs of size 60x60 at top and 30x30 at bottom with 500 mm high at Foot board side

M & L for removing unserviceable base stiffener and S & F Teak wood Support stiffener Size 40x60x900 mm underneath Ply

M & L for removing unserviceable Top Ply and S & F new 12mm thick plywood BWR grade-AA / A of size 1980mmx900mm with 12 x Nos of 40mm long countersunk wood screw complete all as specified and as directed.

S & F of Wooden Corner triangular bracket size 100 X 100 x 25 mm for stability joinging Long rail and side legs duly fixed with adhesive and countersunk wood screw.

Apply french polish with glossy finish after cleaning, dusting and scratching the entire wooden suface with sand emery paper of required grade and hand held grinder, filling putty to the uneven surfaces if any and making smooth by sanding and grinding with standard workmanship all as directed by Engineer-in-charge and as specified

ALMIRAH LARGE STEEL 1/2 H x 1/2 S (DRG NO. FD-114)

M& L to remove old unserviceable locks from Almirahs S & F new 6 lever lock (Size 75 x 50 mm) with duplicate Flat key (2 Nos of key) Make Godrej/Harrison/Link/Bharat of existing size fixed with screw/ spot weld to shutter of almirahs all as specified and directed.

M& L to remove old unserviceable inside box cover of Almirah and S & F new Box cover of size 250 x 120 mm of 1 MM thick MS sheet fixed with screw to shutter of almirahs all as specified and directed.

M& L for Removing old unserviceable 3-way Assembly from Almirahs and supply and fix new assembly including 6mm thick bars round with necessary fittings of approved quality all as specified and directed .

M& L for Removing old unserviceable broken handles from Almirahs and supply and fix new Godrej pattern handle 120 mm length with necessary fittings of approved quality all as specified and directed .

M& L for Removing old unserviceable broken bush between 3 way lock device from Almirahs and supply and fix new brass bush as directed.

M& L for Removing the unserviceable/rusted bottom sheet from Almirah large steel and supply and fix new bottom made out of 1mm thick MS sheet made to shape and size (920 X 485 mm) as on drawing and fixing by welding matching with existing almirah and painting with two coat of synthetic enamel paint over a coat of red oxide primer and all as specified.

M& L for removing the unserviceable hanging rod and supply and fix new CP rod 18/19 mm dia of required length approxi 910 mm

M& L for Removing the existing unserviceable legs from Almirah large steel and supply and fixing the new legs made out of 1.5 mm thick MS sheet size 480 (L) x 100 (H) x 100 (W) and fixed with welding for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint shade over a coat of red /zinc oxide all as specified.

M& L for Removing old broken hinges of Almirahs steel and S & F new MS hinges or U clips 70 / 75 mm long duly welded and all as specified and directed.

TABLE BED SIDE (TEAK WOOD LEGS) (DRG NO. FD-210)

M & L to remove unserviceable plank and S & F of 12 mm teak wood plank 450 x 230 mm for Top side or bottom shelf

M & L to remove unserviceable plank and S & F of 12 mm teak wood plank 450 x 210 mm for middle shelf

M & L to remove unserviceable plank and S & F of 12 mm teak wood plank 230 X 410 mm for side surface

M & L to remove unserviceable ply and S & F of 4 mm OST Ply for back surface size 410 x 230 mm

M & L to remove unserviceable stiffener and S & F bottom stiffener 20x40x 90 mm

M & L to remove unserviceable leg and S & F teak wood bottom legs size 25x25 (at bottom), 40x40 (at top) x 100 mm (high) as in drg

M&L for french polished by scrapping the old tane shade polish, dirt stains on arms, outer surfaces of the item with emery paper or paper machine. The uneven surfaces to be filled with Bee-wax and then polish with French polish as specified to get the glossy look and as directed by the Engr-in-charge.

Bed Hard TW Spl single 1825 x 900 x 660 mm (Visakha) (DRG NO. TP-V5)

Bed Hard TW Spl King size 2000 x 1800 x 660 mm (DRG NO. SK DRG)

Bed Hard TW Spl Queen size 1825 x 1200 x 660 mm (DRG NO. SK DRG)

Almirah mess utensil (DRG NO. FD-93)

Sofa single (DRG NO. FD-373)

Bin lenin cane (DRG NO. FD-15 / 244)

Chair dining cushioned Spl (Visakha) (DRG NO. TP-VI)

Chair dining long back (mess) (DRG NO. TP/SK15)

Chair dining oval back (mess) (DRG NO. TP/SK16)

Chair dining long back (mess) (DRG NO. FD-357)

Chair easy cushion (DRG NO. FD-358)

Hat stand small (DRG NO. FD-361)

Hat stand large (DRG NO. FD-362)

Table dressing ladies (beading, frames and leg portion only) (DRG NO. FD-378)

Table dressing gents (beading, and frames only) (DRG NO. FD-379)

Teapoy (DRG NO. FD-382)

Table peg (DRG NO. FD-383)

Table dressing 8 pers (DRG NO. FD-376)

Table centre 2 tier (DRG NO. FD-393)

Table bedside (TW) (DRG NO. FD-210)

Table bedside Spl (Viskha) (DRG NO. TP-V2)

Table dining Spl TW Round top dia 3'4" (Visakha) (DRG NO. TP-V4)

Sofa set 5 seater TW decorative with arms Spl (DRG NO. SK DRG)

Sofa single seater with arms Spl TW (DRG NO. SK DRG)

Wardrobe 3 door with mirror TW Spl (both Internal & external) (DRG NO. SK DRG)

Wardrobe 2 door with mirror TW Spl (both internal & external) (DRG NO. SK DRG)

Chair writing Spl TW cushion (DRG NO. SK DRG)

Sofa chair decorative TW Spl without arm (DRG NO. SK DRG)

Sofa single chair (DRG NO. FD-373)

Applying one coat of Painting internal or external or both sides as applicable for following items of approved shade with spray machine or handle brush for glossy finsh. Before painting, the rusted surface, it should be wiped with abrasive paper and apply one coat of red oxide primer

Bed hard Wrought Iron size 1825 x 900 mm (Visakha) (DRG NO. TP-V3)

Almirah large steel 900 x 507 x 1950 mm Model Slimline Make Godrej (DRG NO. TP-GODREJ))

Book case steel (DRG NO. FD-1028)

Hard bed MAP (DRG NO. FD/E6/MAP/08)

Almirah small/medium steel (DRG NO. FD-350)

Almirha large steel (DRG NO. FD-351)

Almirah large steel 1/2 H x 1/2 S (DRG NO. FD-114)

M/s.Kissenlal Daga (BID ID -3241359)

VINAYAK BUILDTECHS (BID ID -3242265)

RAGHAVENDRA ASSOCIATES (BID ID -3239287)