REPAIR TO FLOORING, TILING, PLUMBING, SANITARY FITTING, PLASTERING, ROOF TREATMENT AND OTHER MISC BR WORKS IN BILLETS AND OTM ACCN UNDER AGE BR-II, GE(AF) NO 2JODHPUR

Amount

M&L for demolitation of cement concrete of any description and in any position not otherwise specifically providedfor and complete all as specified.

M & L 75 mm thick plain cement concrete type B- 2, 1:2:4 (20 mm graded aggregate) as in floor finish even and smooth without using extra cement complete all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide,filled with sealing compound grade 'A' complete all as specified and directed

M&L for cement concrete type B-1, 75 mm thick 1:3:6 (20 mm graded aggregate) for finishing cement concrete surface even and smooth without using extra cement for plinth protection, path and complete all as specified.

M&L for Machine pressed pecast cement concrete interlocking paver paver block any shape and sze confirming to IS 15658-2006 of 60 mm thickness in M-35 grade rubberised with grey cement and pigment and complete all as specified.

M&L Cement concrete type D-2, 75 mm thick 1:4:8 (40 mm graded aggregate) and complete all as specified.

M&L for sand filling under floors or in foundations including watering and consolidation and complete all as specified.

M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and complete all as specified.

M&L Cement concrete type B-0, 25 mm thick 1:2:4 (12.5mm graded aggregate)

M&L for coloured Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match thick over cement screed 15mm thick in cement mortor 1:6 laid and jointed complete

M&L for coloured glazed ceramic coloured tiles of size 350x 250x 7mm/450x350x7mm thick on walls/vertical surfaces including 10mm thick rendering in CM 1:4, all as directed.

M&L for machine cut Kota stone slab flooring 20-25 mm thick over 15 mm thick screed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for machine cut Kota stone slab 20-25 mm thick on skirting, dado over 10 mm thick rendering in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for coloured vitrfifed cermaic tiles 10 mm thick area of each tiles not less than 0.36 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1;6 as directed by Engineer-in-Charge

All as per item no. 14 above but on vertical surfaces such as dados skirting and risers to step set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick renedering in CM 1:4 on stone masonary surfacesas directed by Engineer-in-Charge

M&L Taking down cement or cement lime plaster of any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and complete all as specified

M& L for 15 mm thick rendering on stone masonary in CM 1:4 on Ceilings on a floating/setting coat for additional thickness using integral water proofing compound , finished even and smooth without using extra cement and all as specified. Note:- Water proofing compound shall be measured and paid seperately

M& L for 15 mm thick rendering on stone masonary in CM 1:6 on walls using , finished even and smooth without using extra cement complete all as specified.

M& L for 15 mm thick rendering on stone masonary in CM 1:4 on walls using integral water proofing compound @3% weight of cement , finished even and smooth without using extra cement complete all as specified.Note:- water proofing compound shall be measured and paid seperatly)

Taking down old existing roof treatment (APP membrane & plaster ) and removing outside MOD and cleaning of roof slab / chajjas sweeping with brooms removing all loose materials debris etc complete all as specified and as directed by Engr-in-charge

M&L for 50 mm thick (average) cement concrete 1:2:4 type C-0 mix (12.5 mm graded stone aggregate) in padding over roof complete all as specified and as directed by Engineer-in-Charge.

M&L10 mm thick screed bed with CM 1:4 with water proofing compound @ 3% by weight of cement finish even and smooth surfaces using without extra cement. Note :-Water proofing compound shall be measured and paid seperately

M&L for providing APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) over on primed surfaced @ 0.5 Ltr/sqm by torched application and complete all as specified and as directed by Engr-in-charge (Note : Quoted rate shall deemed to be included for work in building / structure of any height)

Supply only integral water proofing compound.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm.

S & F 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S & F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of 20 mm dia.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed.

S&F in repairs vitreous- Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F in repair vitreous china WHB white,flat back, size 550 x 400 mm including brackets. vitreous china(flat black or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, all as specified and directed.

S&F in repairs urinal, bowl type or half stall pattern, (excluding flushing cistern and flush pipe) but including waste pipe fixed as in repair complete all as specified.

S&F in repair 15 mm angle/stop valve, fancy type,chromium plated with screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.

S&F as in repair 15 mm angle/stop valve, fancy type,chromium plated with long shank and cup (Concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 15mm bib taps cast copper alloy CP with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as specified and directed.

S & F in repair 15 mm pillar tap cast copper aloy with capston heads chromium plated screwed down fly nuts screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S&F in repairs 15 mm bore two- in- one bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs of flushing cistern PVC 10 ltrs cap valve less syphonic action type, low level white with intel , ball valve , float incl brackets and PVC flush pipe 32mm dia complete all as specified. .

S&F in repairs health faucet CP mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexble tube CP wall hook including making connections and fixed complete in all respect as specified

S&F in repair Brass chromium plated shower rose 125mm size all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm all as specified and directed.

S & F PVC waste pipe 32mm bore and 1000/900 mm long for WHB all as specified and as directed

S&F in repair CP soap dish, fixed to plugs with chromium plated screws and all as specified.

S&F in repair CP grating 100 mm dia all as specified and as directed.

S&F in repair CP tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and all as specified

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) and all as specified and as directed.

S & F Plastic water closet seat, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

M & L for disconnecting existing tanks of any capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Dismantling of existing water tank (PVC/RCC/AC) n exc 500 ltr capcity and removing from site complete as directed by Engr -in-charge.

Dismantling of existing water tank (PVC/RCC/AC) exc 500 ltr but n exc 1000 ltr capcity and removing from site complete as directed by Engr -in-charge.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 100 mm dia

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed in walls including brackets and complete all as specified.

S&F PVC (SWR), junction single, (Single T) with acess door 110 mm dia equal or unequal

S&F PVC (SWR) door bends 110 mm dia

S&F PVC (SWR) Vent Cowl 110 mm dia

S&F PVC (SWR) 'S' trap 110 mm dia

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints fixed in walls including brackets and complete all as specified.

S&F PVC (SWR), junction single, (Single T) with acess door 75 mm dia equal or unequal

S&F PVC (SWR) door bends 75 mm dia

S&F PVC (SWR) Vent Cowl 75 mm dia

S&F PVC (SWR) floor trap of outlet dia 75mm incl jointing with solvent cement

S & F in repairs 100 mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified & directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site.Note-Quoted rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm each but n.exc 4.5 sqm eachand removing from site.Note-Quoted rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.

Taking down shutter of any discription exc 1 sq. m and n exc 2 sq. m each and removing from site complete all as specified.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bed blocks etc for embedding hold fasts complete all as specified and directed by Engineer-in-Charge

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and directed

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specified and directed

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars dovetailed or welded.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with out glazing bars dovetailed or welded.

M&L for powder coated anodised aluminium frame for door window & ventilator with one or more rebates including joining cleat for fixing etc comlete all as specified.

S&F metalic louvers slits to hold glass strip of size 300x500 mm with including arrangement of fixing glass pinhead as per size & louvers ventilator (Glass shall be measurement separately) complete all as specified and as diredcted.

S&F Aluminium anodised barrel tower bolt of extruded section 150mm size

S&F in Butt hinges 100 mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed

S&F extructed aluminium alloy handles, fabricated type,anodised of size 150mm.

S & F in repairs Aluminium alloy, anodised,300mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repairs galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples

S&F in galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples

S&F in repair MS 300 mm , ordinary rat tail rod pattern springs including rooler and roller plate complete all as specified.

M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones.

S&F figured sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each paneand complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and refixing in same opening and complete..Note-Quoted rate shall be deemed to be include for cutting holes/demolition of PCC blocks etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.

Resecuring or easing & adjusting without taking down shutters of any description exc. 1 sqm but n. exc. 2 sqm each.

M&L for complete removal of existing treatment of walls and applying one coats of cement base paint over a coat of primer, white or tinted, all as directed.

M&L for preparation of unplastered surfaces of walls and applying two coats of oil bound distemper over a layer of wall care putty on new surface, complete all as directed.

M&L for complete removal of existing treatment of wall and applying two coats of white washover and , all as directed.

M&L for preparation of new plastered Ceilings and applying three coats of white washover and , all as directed.

M&L for new plastered and unplastered surface of walls and applying two coats of cement base paint over a coat of primer, white or tinted, all as directed.

M&L for preparation of new steel surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide and complete.

M&L for preperation of plastered and unplastered surface of walls and applying two coats of wheather proof extrerior emulsion paint complete all as specified all as directed.

JAMWAY MATA CONSTRUCTION COMPANY

D DEV COMPANY

M/S MAJISA CONSTRUCTIONS