RequiredExperience with Government
RequiredAnnual Turnover
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Executive Computer Table ( 20 pieces ) Technical Specifications * As per GeM Category Specification 1/7 Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Type of Computer Table Computer cum Printer table with key board pullout tray and table top * Mode of Supply Knocked Down To Be Assembled At Consignee Site By The Seller * Construction of Computer/Printer Table Gable end and modesty panel * Frame type Free standing * MISC Table top long sides Edge banded with PVC tape of 2 mm thick with help of hot melt glue * Table top plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Gable end modesty panel plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Number of buffers provided 4-Nos. at bottom * Wheels provided NO * FINISHING AND PACKING Packing Corrogeted Paper Packing * Colour of Top - * MATERIAL Material of table top
Requiredkeyboard and drawer Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest Bottom side of top should have balancing sheet of requisite thickness of same colour as top laminate * Gable end and Modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Leg Material Other wood Other wood DIMENSION Table top thickness ±2mm 19 * Thickness of gable end N.A * 2/7 and modesty panel ±2mm Dimension of leg(mmXmm) ±5mm No legs * Length of table in mm (±15 mm) 1220 1220.0 Depth of table in mm (±10mm) 610 610.0 Height of table in mm (±10mm) 760 760.0 Width of outside drawer on top right side of the table with ball bearing (±5mm) 300 * Depth of outside drawer±5mm 540 * Height of outside drawer±5mm 150 * KEYBOARD TRAY Type of keyboard tray Prelaminated particle board keyboard tray Prelaminated particle board keyboard tray Material of keyboard tray and Right angle L- type supporting bracket Three layer prelaminated particles board(wood product) of grade II type II of IS 12823/Latest * Keyboard adjustablity underdesk keyboard arm * fixing of supporting bracket With telescopic * Length of telescopic channel ±l0mm 400mm * Average weight of telescopic channel ±50Gms 300Gms per set * Keyboard front width±10mm 700mm * Keyboard depth±10mm 500mm * Keyboard height±10mm 100mm * Finish of exposed edges of keyboard tray To be banded with 0.5-1.0mm thick PVC tape with the help of hot melt glue * Material thickness of keyboard tray ±1mm N.A * FOOTREST Material of footrest No footrest No footrest 3/7 Length of footrest ±10mm N.A * Depth of footrest ±10mm N.A * Height of footrest ±10mm N.A * Finish of exposed edges N.A * Material thickness of footrest ±2mm No footrest No footrest WARRANTY Warrantee period in number of years 1 1
Required2
Required3
Required4
Required5 Or higher CERTIFICATION Test reports to be furnished to buyer on demand NO * Product having BIFMA certification NO NO OEM of offered product is ISO 9001:2015 certified YES YES OEM of offered product is ISO 14001:2015 certified YES YES OEM of offered product is ISO 18001:2007 certified YES YES * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
