Providing LWSS to PC Habitation of GP Bihun and Nauhli alogwith house hold connection SH Co intake , WTP Pump house

Amount

Excavation in foundation and trenches etc. up to all depths and in all classification of earth work such as pick work, jumper work, saturated soil including bailing or pumping out of water, blasting soft or hard rock or chiselling / wedging out of soft/hard rock , where blasting is prohibited, in all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting , planking, timbering and dewatering where ever required. Stacking usable and unusable material /soil seperataly , returning the usable soil in 15cm layers by ramming and watering and then dISOsing of all surplus excavated soil/ unusable material as directed within all leads/ lifts complete in all respects within all leads and lifts as per direction of the Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (1cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of from work in foundation and plinth complete in all respect with in all leads and lifts and as per the entire satisfaction of Engineer-in Charge.

Providing and laying cement concrete 1:1.5:3 (1cement:1.5sand:3graded stone aggregate 40mm nominal size) and curing complete excluding cost of from work in Suspended floor ,Dome, roofs, lendings and shalves and thier suports balconies,beem griders and bressumers and cantiliver upto floor two level complete with in all leads and lifts as per direction of the Engineer-in-Charge

Providing and laying cement concrete CC 1:2:4 (1cement:2 sand : 4graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in:-

Foundation , footing basis of columns & the like and mass concrete complete in all respect and as per the direction of Enginer-in-Charge

Column pillers,posts & stuts,square,rectangle in plane.

Suspended floor ,roofs, lendings and shalves and thier suports balconies,beem griders and bressumers and cantiliver upto floor two level complete with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing tor steel reinforcement for R.C.C. work including bending,binding and placing in position complete upto floor two level in all respect complete with in all leads and lifts as per the direction of Engineer-in-Charge.

Providing form work of steel plate 3.15mm thick planking so as to give a rough finish including shuttering, centring, shuttering and propping hight of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in-situ reinforced concrete and plain concrete work in lintels, beams etc. including all leads and lifts in: and as per the entire satisfaction of Engineer-in Charge.

Slopping of Battering surface including folded plates where inclination to horizentalplane does not exceeds 30 degree

Foundation , footing basis of columns & the like and mass concrete complete in all respect and as per the direction of Enginer-in-Charge

b) Beams, cantilivers, girders and lintels sides and soffits of beams,beam haunchings cantilivers, girders, bressumers and lintels not exceeding 1 metre in depth

Column pillers,posts & stuts,square,rectangle in plane.

Flat surfaces such as soffits of suspended fioors roofs landing and the like . Floors etc up to 200mm in thickness. complete in all respect and as per the entire satisfaction of Engineer-In-Charge.

Edge of slabs & Breaks in floors & walls under 20 cm wide complete in all respect and as per the entire satisfaction of Engineer-In-Charge.

Providing and laying cement concrete 1:6:12 (1cement:6 sand:12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth complete with in all leads & lifts as per direction of Engineer-in-Charge.

Random rubble masnory/ polygonal rubble masonry (uncoursed/brought to courses) with hard stone of apporved quailty in foundation & plinth including levelling up with cement concrete 1:6:12 (1Cement :6 sand :12greded stone aggregate) in CM 1:6 (1cement : 6sand) complete with in all leads and lifts.

Boulder filling under floor complete with in all leads and lifts.

Brick work using common burnt clay building bricks in super structure above plinth level upto floor two level in cement mortor 1:4 ( 1 cement : 4 sand ) Ist class brick complete with in all leads and lifts.

Providing wood work in frames of door and window 2nd class Deodar wood with in all leads and lift,carrige of material and other incidental charges complete in all respect as per the direction of Enginer-in-charge

Providing and fixing panneled glazed or panneled and glazed shutters for doors, windows and clerestory windows, including black enamelled iron butt hinges with necessary screws 40 mm thick 2nd class deodar wood complete with in all leads & lifts as per direction of Engineer-in-Charge.

Designing (aesthetically), Providing, Constructing, Testing & Commissioning of Water Treatment Plant of 0.734 MLD capacity consiting of Civil works including Laboratory, Mechnical, Electrical and Instrumental Works including necessary hydraulic testing ,structural testing,equipment testing. The components such as site development,C/o PCC/RCC Retaining walls, Breast walls upto battery limits of WTP, Dewatering, Approach Road, Inter-connecting Path, Walkway, Storm Water Drains, Scouring arrangement, Beautification including all alied Works complete as directed by engineer in charge. The Laboratory as per CPHEEO Manual shall be established at the WTP where separate Building for the same shall be constructed to house the laboratory equipment, office record including Furniture, office Computer complete in all respects. Battery Limit shall be considered as 3.00 m from the edge of the structure or the boundary of the land whichever is less.The rates quoted by the contractor shall be for the complete work. All ancilliary works and accessories required to make the system fully functional shall be included in the cost of work. Nothing extra shall be paid on this account.(Refer Vol-II-Technical specifications & Vol-III, Data Sheet No.1.2 & 1.2.1)

1.20 mtr high fencing (as per approved design)1.80 mtr RCC posts 3 mtr center to center and RCC sturts with 9 horizontal lines and two diagonals of glavanised steel bar bed wire (IS 278-1962 type I)wieghing 9.38 kg/100 mtrs (minimum)starined and fixed to posts by typing to 6mm galavanised steel bar niles/clips with G.I binding bar including cost of Excavition RCC posts RCC strurts and straining belt and embeded in cement concrete 1:4:8(1 cement:4 sand:graded stone aggrate 40mm nominal size)and curing complete in all respects within all leads and lifts as per direction of the Engineer-in-charge.

Providing & fixing M.S. grills of required pattern in wooden frame of window etc. with M.S. flats, square or round bars with round headed bolts and nuts by screws plain grill complete with in all leads and lifts..

Cement concrete flooring 1:2:4 (1cement : 2sand : 4 graded stone aggregate 20mm nominla size) laid in one layer finished with a floating coat of neat cement 40mm thick complete with in all leads and lifts.

6mm thick cement plaster to ceiling in cement mortar 1:3 (1 cement:3 sand)

15 mm cement plaster in single coat on rough side of brick/ concrete/ stone wall for interior plastering upto floor two level including arrises internal rounded angles, chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortor 1:6 (1cement:6sand) complete with in all leads & lifts as per direction of Engineer-in-Charge.

Flushing pointing on brick work with cement mortor 1:3 (1cement :3sand).

White washing with lime on un-decorated wall surfaces (with two coats) to give an even shade including thoroughty brooming the surface to remove all dirt,dust,mortor dirt and other foreign matter.

Applying priming on new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dust and other foreign matter, sand preparing and knotting. Ready mixed paint brushing wood primer pink.

Painting two coats ( excluding priming coat ) on new wood and wood based surfaces with enamel paint to give even shade including cleaning the surface of dust and other foreign matter, sand preparing and stopping with enamel paint other than white.

Providing and fixing oxidized M.S. sliding dooor bolts with nuts and screws etc. complete 300x16mm complete with in all leads & lifts as per direction of Engineer-in-Charge.

Providing and fixing anodised M.S. Tower bolts (Barrel type) with necessary screws etc.complete .

Providing and fixing Oxidized M S Handle with necessary screws etc complete. 125 mm

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement: 3sand:6graded stone aggregate 20mm nominal size) including finishing the top surface of concrete smooth.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed of dry brick /stone aggregate 40mm nominal size) well remmed and consolidated and grouted with fine sand including preparation of ground.

Half brick masonry in common brunt clay building bricks in cement mortor 1:4 ( 1 cement:4 sand ) 2class bricks complete with in all leads and lifts.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light p

Group -C

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper condu

i) 2x1.50 Sq. mm.

ii) 2x2.50 Sq. mm.

(a) Supplying and fixing 3 pin 5/6 amps. Socket outlet on the exists switch box/covers including connections etc. as required.

(b) Supplying and fixing 2 way 5/6 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required.

a) Supplying and fixing 3 pin 15/16 amps. Socket outlet on the exists switch box/covers including connections etc. as required.

(b) Supplying and fixing 15/16 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required.

Supplying and fixing wooden box of following size (nominal) on surface or recess with suitable size of phenolic laminated sheet cover of in front as required.

b) 203 mm.x152 mm.x 60 mm. Deep

Providing and Supplying CFL 1 x 23 watt of reputed make in all leads and lifts.

Providing and Supplying of CFL 1 x 5 watt in all of reputed make in leads and lifts.

Supplying and Fixing 5 Amps to 32 Amps rating, 240 Volts, L series miniature circuit breaker of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required Cat - A. (Single Pole)

Supplying and fixing celing rose on existing junction box/wooden block including connections etc.as required.

Supplying and fixing following rating ,double pole ,240 watts ,isolator in the existing MCB DP complete with connections (testing and commissioning etc. as required (63 amp. CAT A

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Single door-16 way

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Ceiling Fan 1400 mm sweep, Category-A

Providing and fixing ultra slim decorative extruded box fixture with domestic electronic ballast, snap-on installers, suitable for 28 watt FTL (T5), complete with all accessories (including one No. T-5 Tube), connections, testing and commissioning etc. as required.

1 x28 watt-FTL(T5) (Category-A)

P/F street light with CFL 65 Watts for pump house and Jack well complete in all respect.

Providing and fixing two core service wire 6 sqm thick

SANGRAM NAIK

YOG RAJ