PROVN OF SOLAR STREET LIGHTS AT VARIOUS LOCATIONS OF PANGODE MILITARY STATION UNDER GE ARMY TRIVANDRUM

Amount

Supplying, Installing, testing and commssioning of smart integrated solar street lights with built in mono crystaline panel of capacity 50 W smart integrated solar all in one with hybrid solar street light with system efficacy 120 Lumen/ watt, MPPT charge controller and PIR sensor with colour temperature 6000-6500K, LiFePO4 battery, with dimming profile solar panel with 6 meter octagonal pole hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness, 3 mm base plate dimensions of 200x 200x 12mm suitable for wind speed as per IS 875 part III including 4 Nos of foundation bolts, complete all as directed by Engr-in-Charge. Make: Bajaj as per cat No BSZSL 50 W or equivalent in Philips/Havells/Crompton Note : Excavation and earth work ,RCC work for erection of pole shall be measured and paid separately

Excavation in trenches n.exc 1.5mtr wide and n.exc 1.5mtr in depth and getting out in hard / dense soil for cable/pipe/poles, trimming the sides forming bottom surface to required levels complete all as specified and directed by Engr-in-Charge.

Returning, filling in including spreading, levelling watering and well ramming using soil obtained from excavation in layer not exc 25cm complete all as specified and directed by Engr-in-Charge..

Removing excavated soil n.exc 50mtr and depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed by Engr-in-Charge.

M & L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation of poles/stays complete all as specified and directed by Engr-in-Charge.

M&L for reinforced cement concrete M-30 (design mix) as in foundation, including rafts, footing, foundation beam, plinth beam, bases for columns etc basemebt slabs, under-reamed piles and mass concrete using 20 mm graded aggregates all as specified and directed by Engr-in-Charge.

M&L for reinforced cement concrete M-30 (design mix) as in columns, pillars, piers, posts and struts using 20 mm graded aggregates all as specified and directed by Engr-in-Charge.

Use and waste form work to sides of concrete foundations, base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam, and similar work, vertical or to batter for flat surfaces all as specified and directed by Engr-in-Charge.

Use and waste form work to sides of pillars, posts, struts, piers, columns and stanchions for square, rectangular or polygonal surfaces all as specified and directed by Engr-in-Charge.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape reqd, incl cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed by Engr-in-Charge.

M&L for TMT bars 5 mm dia and over upto and incl 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape reqd, incl cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed by Engr-in-Charge.

M/s.Rejoy Constructions

M B JAYAVEL

M/s VJ ENTERPRISES

SUJAN

SUPER COOL

JESWIN BUILDERS

M/s Harshal Traders

B5BUILDING SOLUTIONS

Shree Ayyappa Engineering

P K ENTERPRISES