Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹35.9 L+₹27,376 (0.77%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹37.1 L+₹1.5 L (4.08%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹38.2 L+₹2.6 L (7.21%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN L1 | |
| 5 | L5₹38.5 L+₹2.9 L (8.02%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹42.1 L
EMD Value
₹84,300
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(KH)YOL
GE(KH)YOL, YOL HP
Provn of tile and allied works in Bldg No. P-30, P-31, P-32, P-33, P-34 (OR Md Accn) and P-06, P-11 (JCOs Md Accn) and Provn of Boundary pillars at YOL CANTT under GE (KH) YOL
2022_MES_533415_1
GE/Y-11/2022-23
Open Tender
Civil Works
Item Rate
180 days
YOL CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE(KH)YOL
₹84,300
Yes
30 Aug 2022
24 Jun 2022
29 Jul 2022
24 Jun 2022
27 Jul 2022
8 Jul 2022
60 days
Amount
SCHEDULE 'A' PART-I: Dismantling stone slabs and tiles of any description or thickness, laid bedded and pointed in any mortar in floors, aprons etc. including removal of debris to a distance exc 1.5 km but n.exc 2 km, all as specified and as directed.
Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete including removal of debris to a distance exc 1.5 km but n.exc 2 km, all as specified and as directed.
Demolition of cement concrete reinforced of any description in any position complete including removal of debris to a distance exc 1.5 km but n.exc 2 km, all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete including removal of debris to a distance exc 1.5 km but n.exc 2 km, all as specified and as directed.
Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal from site, all as specified.
Dismantling of cast iron or reinforced concrete drain pipes 75 to 110mm dia, laid in floors or fixed to walls, jointed in cement mortar and taking out of trenches, complete all as specified and directed.
Demolition of stones or brick masonry, built in cement mortar including all quoins, arches etc., but excluding ashlar facing, dressed stone work etc. complete including removal of debris to a distance exc 1.5 km but n.exc 2 km, all as specified and as directed.
Taking down shutters and refixing the same opening exc 1 sqm and n.exc 2 sqm each site, complete all as specified and directed.
Mat finish joint less (non skid), Premium class I grade, coloured, ceramic tiles, 7 to 8 mm thick (Square/ rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) complete, all as specified.
Glazed coloured tiles of size 350x250/450x300x7 to 8mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with white or coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) complete, all as specified.
Mat finish joint less (non skid), Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) complete, all as specified.
Mat finish, premium quality, coloured/ printed ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting, dado etc. set and jointed in neat cement slurry and includingincluding 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed. including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed.
Marble 14 to 16mm thick, green marble, (table rubbed and polished) as in floor, kitchen cooking platform /shelf and verticle surfaces duly machine cut in skirting /dado and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade green marble type, all as specifiedand directed.
Machine cut kota stone slab flooring 18-20 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:6 (1 cement : 6 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish complete, all as specified.
Plain cement concrete M-7.5, nominal mix, D-2, using 40mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified.
Plain cement concrete M-7.5, nominal mix, D-2, using 40mm graded brick aggregate, as in sub base layer under floors, sunken floors, complete all as specified.
Plain cement concrete M-15, nominal mix, type B-0, using 12.5mm graded mechanically crushed stone aggregate as in floors, 25mm thick, surface finished even and rough to receive top surface, all as specified.
Plain cement concrete M-15, nominal mix, B-0 using 12.50mm graded mechanically crushed stone aggregate as, in lintels upto 1.50 metres clear span cuts, steps seismic and other similar bends, coping, bands plates for serving hold fasts etc. and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified.
Brick work with old size fly ash bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (1 cement : 4 coarse sand), all as specified.
Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on other than fair faces of brick wall or on stone masonry surfaces, surface finished even and smooth without using extra cement, all as specified.
Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, mixed with WPC, all as specified. Note : Supply only Water proofing compound shall be measured and paid for seperately.
Rendering cement plaster 5mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on fair faces of RCC concrete surfaces and including applying cement slurry in bottom of slab, chajjas, fin, facias etc, complete all as specified and directed.
Preparation of newly plastered or unplastered wall surfaces and appling two coats of cement base paint complete, all as specified.
Preparation of newly plastered or unplastered wall surfaces and applying two coats of oil bound distemper over 2mm thick wall care putty, complete, all as specified.
Two coats of white wash on newly plastered or un plastered, previously undecorated ceiling surfaces including preparation of surfaces complete, all as specified.
Complete removal of exiting treatment of wall surfaces and applying two coats of oil bound distemper over a coat of primer and over 2mm thick wall care putty, complete, all as specified.
Supply only intergal water proofing compound, complete all as specified.
Reinforced cement concrete M-15, nominal mix, B-1 using 20mm graded mechanically crushed stone aggregate as in slab supported on walls, beams and columns infloors, roofs, landings, balconies, canopies, deck slabs and in shelves, complete all as directed.
TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers and binders, all as specified.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)in rough finished surface of concrete complete all as specified.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls, complete all as specified.
Mild steel galvanized iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.
All as per item No 32 above but except tubing. Note: Serviceable GI tubing retreived from taking down under respective items of BOQ shall be reused.
Cutting holes in brick walls in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick wall but not exc one brick complete all as specified.
Sink with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; ncluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 405mm x 355mm x178mm, all as specified.
40mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/Sqcm fixe to wall, ceilings or in floors etc, any type of pipe, complete all as specified and directed.
Soap dish, chromium plated, fixed to plugs with chromium plated, brass screws, all as specified.
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified.
Chromium plated brass shower rose, type, 125mm size suitable for 15mm bore pipe with swivel joint fixed to pipe, complete all as specified.
Stop valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repair, complete consealed stop cock, all as specified.
Stop/Angle valve, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs, complete, all as specified.
Bib taps, fancy type 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, chromium plated screwed for iron pipe or for brass ferrule and fixed in repairs, all as specified.
Brass Chromium Plated, Tubular towel rail, 20mm dia, D type, 60cm long between flanges, with brackets, fixed with chromium plated screws, fixed, complete all as specified.
Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with PVC ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-1 using 20mm graded crushed stone aggregate complete all as specified,including PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve, float and handle with brackets with PVC 32mm dia flushing pipe, anti-syphonage pipe, fixed in repair, complete, all as specified.
Wash basins, Vitreous China (Flat back type) size 550mmx400mm, crystal white with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with CP coupling nuts at both ends, waste pipe of polythylene of low or high density or PVC of 32mm dia including Pillar taps fancy type, 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed in repair, complete all as specified.
75mm bore Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.
Cast iron soil, waste and vent spun pipes of 100mm bore single socketed, in any length with or without ears, with cement joints, fixed to walls with MS clamps etc,. complete all as specified.
Cast iron soil, waste and vent spun pipes of 75mm bore single socketed, in any length with or without ears, with cement joints, fixed to walls with MS clamps etc,. complete all as specified.
75mm bore Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access doors, complete all as specified.
100mm bore Cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified.
Water profing treatement of sunken portion/water tank padding, high solid content single component water based liquid applied elastomeric water proofing membrene as ASTMC 836 and ASTMD 6083, thickness of the memberane shall be 1.5mm, having solid content of more than 80% elongation of 500+(-) 50% laid over reinforcing layer on non woven geo-textile mesh of 40/50 50gms, including applying self primer coat by diluting with 1:1 ratio @ 0.2 kg per sqm and suface preparation including cleaning of existing treatement complete all as per specified and directed by Engineer -in -Charge.
Rendering cement plaster 10mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers (5mm thick first layers and 5mm thick 2nd layer) mixed with WPC, all as specified. Note:- water proofing compound shall be measured and paid separately.
Mild steel galvanised medium grade 32mm dia tubing with all fitting; laid in trenches, as in spout of sunken floor, complete all as specified.
Steel plate rack of size 600mmx750mmX250mm made of stainless steel 1.00mm thick fixed with plugs, washers and steel screws including fixed in wall with screws ands PVC sleeve of required or fixing arrangement complete all as specified
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing of surplus soil to a distance n.exc 50m, all as specified.
PCC M-10, nominal mix, C-2, using 40mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified.
Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed, complete all as specified and directed.
Applying two coats of synthetic enamel paint over a coat of primer on new prepaired concrete surfaces of any description, exceeding 10cm width or girth including preparation of surfaces, all as specified.
TMT bars 6 to 8mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers and binders, all as specified.
M/s Khanna Construction company
KISHAN CONTRACTOR
M/S JATINDERA ENTERPRISES
surinder kumar jindal & bros.
Eshaan Construction Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .