A&A to E.I. & Substation Equipment at Government Press Sector-29, Gandhinagar

Name of Work A&A to E.I. & Substation Equipment at Government Press Sector-29, Gandhinagar

Fund Head : Deposit Work

Sr. No. Item No. Particulars. Qty. Rate Amount

Signature of Contractor

Deputy executive Engineer Executive Engineer

C.P Electrical R & B Sub Dn 21 C.P Electrical Division

Gandhinagar. Gandhinagar.

Name Of Work :- A&A to E.I. & Substation Equipment at Government Press Sector-29, Gandhinagar

Item Estimated Rate in Rs.

Item Description Unit Amount in Rs.

No. Quantity in Figure In Word

Replacing old and u/s by Point wiring for Light / Bell with

2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of

pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected

on PVC / Metallic/Wooden box, single mounting base

1 50 pts 539.34 #NAME? pt

frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling rose / H.D.Connector

as directed.(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete Cat.

Replacing old and u/s by Point wiring for FAN with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME

step type electronic fan regulator mounted and

accessories with earth continuity of following type erected

2 25 pts 765.58 #NAME? pt

on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete Cat. III

Replacing old and u/s by Point wiring for on board Looped

Plug with 6A Modular type switch & 5 pin socket erected

on PVC / Metallic/Wooden box, single mounting base

3 10 pts 309.06 #NAME? pt

frame covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following type

accessories Cat. III

Replacing old and u/s by Point wiring for Tissino / Modular

secondary light point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires, in below

type of pipe to be erected complete with earth continuity

and necessary connection with primary light with

4 40 pts accessories erected on Metal / PVC / wooden box 158.57 #NAME? pt

covered with 3 mm thick PC(Polycarbonate) / Acrylic

sheet for open / concealed wiring. with necessary Lamp

holder / ceiling rose / H.D.Connector as directed.((a) with

medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Replacing old and u/s by Providing following type of

Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation

directed by Engineer In charge.

(1)One No. SP 6 Amp. Cat.III

10 nos 151.50 #NAME? Each

(2) One No 5 pin plug Cat.III

10 nos 151.50 #NAME? Each

(7) Blank Plate Single Cat.III

10 nos 25.25 #NAME? Each

(9) 16 Amp. SP one way switch Cat.III

10 nos 180.79 #NAME? Each

(10) 6/16Amp. Universal socket Cat.III

10 nos 199.98 #NAME? Each

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

300 mtrs 24.24 #NAME? mtr

200 mtrs 33.33 #NAME? mtr

Providing & erecting PVC Corrugated Flexible Conduit

7 with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes.

50 mtrs 17.17 #NAME? mtr

Replacing old and u/s by Providing and erecting Mains

with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe

8 to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

300 mtrs 78.78 #NAME? mtr

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. Mm

500 mtrs 104.03 #NAME? mtr

Replacing old and u/s by providing and erecting Mains

with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe

9 to be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories(a)

2 wire 4 sq. Mm

100 mtrs 140.39 #NAME? mtr

Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

10 300 mtrs following size to be erected as directed. (e) 1.50 Sq.mm 3 58.58 #NAME? mtr

core round PVC sheathed

Replacing old and u/s by providing and erecting Mains

with ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing

pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if

(f) One wire 10.00 sq. mm

20 mtrs 115.14 #NAME? mtr

Providing & Erecting 3mm thick Polycarbonate (PC)

12 1000 sq.inch sheet with grooving as directed 3.03 #NAME? sq.inch

Replacing old and u/s by providing and erecting

Decorative call bell Ting-tong box type 250 volts complete

13 5 nos 71.71 #NAME? Each

Replacing old and u/s by Supplying and erecting LED

indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%,

14 CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

Cat-lll All New

10 nos 165.64 #NAME? Each

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

125 nos 373.70 #NAME? Each

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

15 25 nos 4,248.06 #NAME? Each

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage

protection. (ii) 48 - 59 Watts Cat-lll

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

16 15 nos 6,177.16 #NAME? Each

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (B) Flood

Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage

protection. (iv) 90 - 119 watts Cat-lll

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of

KA. at 415 V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release suitable to

17 1 nos work on A.C. supply 50 c/s. with all internal connections, 6,790.23 #NAME? Each

spreader tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of

KA. at 415 V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

18 1 nos G.M.S. housing. 7,469.25 #NAME? Each

ICS=100% of ICU only Cat III

Note:-1 Add Rs. 10% extra for housing/Encloser of MCCB

for Item No 3-4-1 to 3-4-12 (The Enclosures should be

used of same company of MCCBs to be used)

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 35 KA. at 415 V. having Normal current rating

200A.with variable Thermal & magnetic release suitable to

19 2 nos work on A.C.supply 50 c/s. with all internal connections, 17,843.67 #NAME? Each

spreader tinned copper & complete erected in existing

ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 35 KA. at 415 V. having Normal current rating

200A.with variable Thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

20 1 nos 19,628.04 #NAME? Each

ICS=100% of ICU only Cat III

Note:-1 Add Rs. 10% extra for housing/Encloser of MCCB

for Item No 3-4-1 to 3-4-12 (The Enclosures should be

used of same company of MCCBs to be used)

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of

KA. and above at 415 V . having normal current rating

250A. with variable thermal & magnetic release suitable to

21 6 nos work on A.C.supply 50 c/s. with all internal connections, 23,041.13 #NAME? Each

spreader tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of

KA. and above at 415 V . having normal current rating

250A. with variable thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

22 2 nos G.M.S. housing. 25,345.24 #NAME? Each

ICS=100% of ICU only Cat III

Note:-1 Add Rs. 10% extra for housing/Encloser of MCCB

for Item No 3-4-1 to 3-4-12 (The Enclosures should be

used of same company of MCCBs to be used)

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of

KA and above at 415 V having Normal current rating

400A. with variable Thermal & magnetic release suitable

23 8 nos to work on A.C.supply 50 Hz. With all internal connections, 27,751.77 #NAME? Each

spreader tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III

Providing and erecting Approved make Earth fault Relay

suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT

24 2 nos ratio & MCCB rating as following along with shunt trip 5,156.05 #NAME? Each

220V AC. with all internal connections & complete erected

in existing M.S.housing..

5 nos 5,482.28 #NAME? Each

16 nos 5,956.98 #NAME? Each

Supplying and erecting triple pole & neutral 440V / 500V

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

(B) Suitable for 200 Amp. capacity

2 Rn. Mtr. 3,202.71 #NAME? Rn. Mtr.

(C) Suitable for 300 Amp. capacity

5 Rn. Mtr. 4,909.61 #NAME? Rn. Mtr.

(D) Suitable for 400 Amp. capacity

15 Rn. Mtr. 7,319.47 #NAME? Rn. Mtr.

(F) Suitable for 800 Amp. capacity

3 Rn. Mtr. 13,199.69 #NAME? Rn. Mtr.

Providing and erecting Miniature circuit breaker single

pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

26 88 nos existing box. confirming to IS 8828/1996 with ISI Mark 123.22 #NAME? Each

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

27 18 Nos capacity (b)40 Amp. Cat.III 736.29 #NAME? Each

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

28 4 Nos 811.03 #NAME? Each

capacity (c)63 Amp. Cat.III

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI) (b) sheet steel

double door (i)4 way

4 nos 2,339.16 #NAME? Each

Providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on single phase 240 V,50Hz. having

30 12 nos 2,458.34 #NAME? Each

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for

following Max. rating erected as directed (ii) 40Amps. DP

Providing and erecting HOT deep Galvanised iron

strip/wire 4.064mm to 1.626mm.

31 30 kg 77.77 #NAME? kg

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in 4,591.46 #NAME? Each

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must

be submitted by Agency. (a) For Electrical Installation up

to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge

33 6 nos 5,760.03 #NAME? Each

has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must

be submitted by Agency. (b)For Electrical installation up

to 11 kV in normal soil.

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per

approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction

of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts,

34 10 Sq Mtr. 10,468.65 #NAME? Sq Mtr.

foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and

rubber gasket,heavy duty end terminal connection,danger

notice board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy powder

coating. (The rates excludes the cost of switchgears, bus

bars, inter connecting mains & Copper Aluminium strips,

meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with

following approved manufacturers with following size. (A)

locally fabricated panel board (i) with 350 mm depth

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections

complete with cutting, welding, grinding & finishing duly

35 1000 kg painted with one coat of red oxide with erection on site as 77.77 #NAME? Kg.

per direction of engineer in charge with necessary

grouting, cementing, plastering & finishing complete.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

36 laid on wall with necessary clamps or in existing trench /

pipe of following size of cables

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

100 mtrs 264.62 #NAME? mtr

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

200 mtrs 454.50 #NAME? mtr

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

100 mtrs 648.42 #NAME? mtr

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

300 mtrs 1,085.75 #NAME? mtr

(I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core)

800 mtrs 1,401.88 #NAME? mtr

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

37 800 mtrs 168.67 #NAME? mtr

trench / pipe of following size of cables (C) 4 core 10 Sq.

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

kV. to be laid on wall with necessary clamps or in existing

38 250 mtrs 846.38 #NAME? mtr

trench / pipe at road crossing or floor of following size of

cables. (A) 4 core 10 Sq. mm

Providing and fixing approved make Perforated C type

cable tray. Made from sheet steel. The cable tray should

be single or double bended as per required and as per IS

2062/1079 and shall be coated with hot dip galvanizing as

39 per IS 2629/4759. with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like nut - bolt

and washers etc. erection with necessary support(

included) as per Specification and as per instruction of

engineer in charge..

(3) 150 X 50 X 1.6 mm Thick

150 mtrs 424.20 #NAME? mtr

(5) 300 X 50 X 2.0 mm Thick

400 mtrs 622.16 #NAME? mtr

Making trench in soft soil of suitable width of 90 cm deep

for laying cable or locating the fault all over the run and

40 600 mtrs back filling the same and making the surface as normal 55.55 #NAME? mtr

Making trench in Hard Murrum / Tar Road of suitable

width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

41 100 mtrs the same and making the surface as normal ground. 432.28 #NAME? mtr

Drilling the road without breaking the road surface

(Asphalt) for laying of cable for feeding power supply by

making up to following size of holes at both ends

42 50 mtrs complete. 492.88 #NAME? mtr

(A) Up to 100 mm bore dia

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

43 200 mtrs material at required depth in existing trench for laying of 62.62 #NAME? mtr

cable. below ground / road surface for enclosing cable

(A)50 mm outer dia

Replacing old and u/s by Providing & erecting Approved

make Power Saving 50 Watt Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C. 50 Hz

1200 mm sweep complete having 3blades with aluminium

44 25 nos blades with , canopy & 30 cm. down rod erected with 1,948.29 #NAME? Each

earthing.(Make shall be approved by Engineer in charge))

Providing 2.5mm.thick laminated acrylic sheet to cover the

fan hook or Fan box.

45 25 nos 18.18 #NAME? Each

Replacing old and u/s by Supplying & erecting approved

make low noise decorative exhaust fan having square

frame ABS body with inbuilt lowers & square

frame.250mm with 1350 RPM Cat.II Old-2 New-3

46 5 nos 1,703.87 #NAME? Each

Supplying & erecting single phase approved make

industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium duty

47 5 nos 2,054.34 #NAME? Each

having following dia size and maximum speed in RPM

[A] 300-305 mm dia 900 RPM

Supplying and erecting approved make Octagonal pole

made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With

48 20 nos 7,561.87 #NAME? Each

Suitable foundation (Included) as per details given by

manufacturer considering site requirement. (C) 5 Mtr.

Long 70 mm Top X 130 mm bottom dia, 3 mm thickness

with 200mmX200mmX12mm base plate, 4-M16 Bolts and

600mm long with necessary G.I. J Bolts .Approx Pole

Providing and erecting street light pole bracket comprising

main B Class GI pipe of 4.2 cm/require outside dia.

complete with suitable B Class G.I sleeve tubing of

approx. 45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for fixing

the brackets and having spread of 1 mtr. length with

49 15 nos 614.08 #NAME? Each

suitable rise as per site condition & suitable welded

stiffener reducer and nipple with check nut complete

painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos

of arms. [A] Single Arm bracket 1 Mtr

Providing and erecting street light pole bracket comprising

main B Class GI pipe of 4.2 cm/require outside dia.

complete with suitable B Class G.I sleeve tubing of

approx. 45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for fixing

the brackets and having spread of 1 mtr. length with

50 5 nos 829.21 #NAME? Each

suitable rise as per site condition & suitable welded

stiffener reducer and nipple with check nut complete

painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos

of arms. [B] Double Arm Bracket 1 Mtr

Supplying & erecting approved make SMC press

moulded composite FRP. loop-in, loop-out approx. 2mm

thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors

as per requirement having locking arrangements with

51 15 nos 898.90 #NAME? Each

mounting clamp with nuts, bolts & washers suitable for

erection on pole with cable clamps& earth bolt of following

size of box. (A) 300mm x 200mm x 100mm [deep]

Supplying & erecting IP 55 grade following size section

pillar fabricated from joint less M.S. Sheet with angle iron

legs made from jointless M.S. Angle with cable clamps to

be buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side, with internal

and outside looking arrangement with lock and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

52 1 nos welded and other with nut and bolt for erecting Bakelite 3,595.60 #NAME? Each

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should

be without joint with water leakage proof & tested as per

IP 55 test & followed by IS 2147 of 1962 (B) 75 X 60 X

cm section pillar fabricated from 16 Gauge MS Sheet with

angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle.

Supplying & erecting approved make Digital time switch

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD

53 1 nos display. Also comprised permanent ON/OFF switching. 3,168.37 #NAME? Each

Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as

required with necessary connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time

switch complete erected as per direction Cat III (D) 4 pole

54 1 nos 2,782.55 #NAME? Each

Providing, erecting, testing commissioning & getting Plan

Approval as well as NOC from Electrical Inspector for

extensible H.T panel comprising of one

630A/800A/1250A. H.T. VCB incoming & Two outgoing

630/800/1250 A Drawout type VCB confirming as per I.S.

for use on 11 kV, 3 phase, 50 Hz. unearthed A.C. supply

system having breaking rupturing capacity of 350 MVA or

Above complete with spring operated mechanism,

mechanically & automatic ON-OFF and spring mechanism

charged, discharged indicators, ON-OFF mechanical

push button, operation counter necessary auxiliary

55 1 nos switches, closing shunt trip, air insulated busbar chamber 1,328,836.80 #NAME? Each

having heat shrinkable PVC sleeves, mechanical

interlocks safety shutters, isolating plugs and a VCB

trolley with three vacuum interrupters with epoxy support

insulators and self aligning finger type isolating contacts.

The breaker shall be Manual cum motorised mechanism &

auto spring charge with TNC switch closing with following

accessories. The Standared Companies Switchgear shall

be Used and Only Manufacutres as per IEC 62271-

200/201 for beneficial use.

1.flush mounting type digital multifunctional meter with

communication facility - Three sets.

2. Power Factor Meter One No

3. Double core current transformer cast resin type having

ratio 200 to 50/1 core for metering & second core for

protection having required class of accuracy. - Three Sets

4. Instantaneous under voltage relay,Over Voltage relay &

Temperature rise Tripping Relay

5. Electrical closing coil & short trip coil operating on

110V. D.C.- Three Sets

6. Auxiliary relay for anti pumping device

7. Three phase Three limb Drawout type feeder connected

& output of 200 VA cast resin insulated potential

transformer having ratio 12000V./110V. and 200 VA

Burdon with 0.5 accuracy. - One No.

8. Common Alarm bell operating on 110V A.C.- One No.

9. Digital KWH Meter - One No.

10. Cable boxes suitable up to 11 KV 3core 150 sq.mm

XLPE cable. - Three Nos.

11. 230V. A.C. to 110V. D.C. power pack for closing &

tripping circuit common.

12.Breaker ON-OFF, Auto trip and spring charged

indicators. - Three Sets.

13.Phase indicating & panel illumination lamps with plug

socket - Three Sets.

14.Numerical Communicable type non directional O/C &

a setting of 5-250% both in O/C & E/F. -Three Set

complete with necessary interconnection with air insulated

high grade copper busbar {Breaker Testing scope include

Closing Time, Opening Time, VCB Hi-Pot test at Site}{

Relay Testing Scope Include testing of all protection by

three phase testing kit at site }(VCB Trolley is to be

Supplying rubber matting of following thickness as per

IS:15652/IEC 61111 (c)12mm

56 5 Sq. Mtr. 3,081.51 #NAME? Sq. Mtr.

Providing and erecting ISI Marked 3core 185 Sq.mm

XLPE insulated 11 KV armoured cable Aluminium

conductor IS-7098 to be laid on wall with clamps or in

57 60 mtrs provided cable trench / pipe approved manner as directed. 1,961.42 #NAME? mtr

Providing and erecting cable end termination kit, heat

shrinkable Push on type Densons/ Raychem/ Elastimold

make suitable for 11 KV XLPE cable 3core 95 & 120/185

58 5 nos 8,004.25 #NAME? Each

Sq.mm (B) Indoor type

Supplying & fixing Steel Chequered Plate having 7 mm

thickness, duly painted with two coats of black Japan

colour. (Average Wt 61.1 kg / Sq.Mtr)

59 5 Sq. Mtr. 3,531.97 #NAME? Sq. Mtr.

Supply of 500 KVA Outdoor type Compact Substation

consisting of Transformer,HT switchgear and LT

Switchgear and confirming to IS/IEC 62271-202. a)

Transformer: 500 KVA Copper wound 11kV /433 V

DYn11, Dry Cast resin type Transformer with tapping

range +10 to -10% @ 2.5% ( with tolerance), class F , with

surge restorers, Digital WTI, IS/IEC 62271-202 as per b)

HT Compartment: 11kV, 21kA for 3 Sec . 630 A 50 Hz,

gas insulated VCB in SS tank in sheet enclosure having

provision for one no. direct connection of Incoming supply

cable up to 300sq mm and one no. VCB( Manually

charging & closing) in series with LBS between VCB and

Transformer, Self Powered Relay 3 O/C +1 E/F Relay

type CSPR-V5, mechanical ON/OFF indicator, trip coil

Manual Close & Trip PB, live cable indicator, mechanical

interlocks, pad locking facility, SF6 gas manometer, cable

boots, 3 nos. CTs with Ratio -/1A, Cl: 5P10, 2.5 VA for

protection c) LV side compartment : one no. ACB of 800A,

50kA, 4Pole, Microprocessor based release with

60 1 nos arrangement for bottom cable termination ( 100% for 2,015,970.10 #NAME? Each

phase & 50% for N, Current density - 1A/ sq mm) The

enclosure should be of IK10 type.The Enclosure shall

construction shall be GI of thickness at least

1.6/2mm.The enclosure shall be Powder Coated. Each

compartment will be provided with the door and pad

locking arrangement. The Compartment illumination lamp

with door operated switch shall be provided for each

compartment. The Transformer compartment will have IP-

34 ingress protection, whereas the HT/LT compartment

will have IP-54 protection.The connection between HT and

Transformer shall be by 3 runs of single core 95 sq mm

XLPE aluminium cable and between Transformer to LT

switchgear shall be appropriate rating Aluminium PVC

sleeved Busbar Add extra Rs 16000/- for integrated

steel cubical panel IP 54 to house up to 06 Nos additional

outgoing switchgears with proper rating busbar

drop,supports etc with arrangment for cable termination

etc.( Switchgears is not included in this)

Design, Supplying, installing, testing of factory fabricated

ready made Three phase APFC Panel Cubical Panel

fabrication should be type tested as per IEC

61439:1&2 Capacitor Duty Contactor for switching as per

following Steps Incomer Switch of MCCB type

Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal

earth fault protection Incomer Switch of MCCB type

Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal

earth fault protection,Copper tinned insulated

Busbar,Cubical panel should be indoor type with IP 43 and

IK 10,Metalized polypropylene film tye3-phase 550Volt

Capacitor,De tuning Reactor for each capacitor,Panel

580,323.78 #NAME? Each

having Short Circuit and Overload protection,Each step

Capacitor having suitable MCB with Sc, OL, internal earth

fault relay,Each stage having Stage Contactor (Capacitor

load rating),PF regulator master controller having suitable

steps with LCD display, Rs 485 Communication port,

Indication LED Lamps for main incomer and ON-OFF for

each capacitor bank,MS Chanel for Floor mounting, Cable

entry as per site situation,Cooling fans for panel

RUPEES IN WORDS #NAME?

I/We am/are willing to carry out the work at(No above rates allowed) ____________% below ___________________________________

__________________percent (Should be written in figures and words) below the tendered rates mentioned above.

Amount of my/our tender works out as under :

Estimated amount put to tender Estimated amount put to tender

Deduct……………………….. % Below Add……………………….. % Above

In words In words

1 I/We hereby declare that I/We have visited the site, fully exquisite myself/ourselves with the local situation regarding materials and

other factors pertaining to the work before submitting this tender.

2 I/we hereby declare that I/We carefully studied the conditions of specifications and other tender documents of this work and agree to

execute the same accordingly.

3 A tender with any overwriting in percentage (should both in word and figures) rejected out right.

4 Insertions and/or corrections in the percentage quoted ( both in word and figures) resulting into increase in the value of the work shall

be rejected outright unless it is authenticated by the office opening the tender at the time of opening of tender.

5 Dismentaling the existing material taken by contractor as mention rates.

Signature of Contractor

Deputy executive Engineer Executive Engineer

C.P Electrical R & B Sub Dn 21 C.P Electrical Division

Gandhinagar. Gandhinagar.

Less for the D.M

Name of work :- A&A to E.I. & Substation Equipment at Government Press Sector-29, Gandhinagar

Sr.no Item Qty. Per DM rate Total

1 Cost Of Old & u/s Light Pts. 25 Pts. 17.96

2 Cost Of Old & u/s Secondary Pts. 40 Pts. 4.80

3 Cost Of Old & u/s Fan Pts. 12 Pts. 26.92

4 Cost Of Old & u/s Looped Plug 5 Pts. 10.52

5 Cost Of Old & u/s 6A Switch 10 Nos. 5.60

6 Cost Of Old & u/s 6A Plug 10 Nos. 5.60

7 Cost Of Old & u/s Blank Plate 10 Nos. 1.00

8 Cost Of Old & u/s 16A Switch 10 Nos. 6.76

9 Cost Of Old & u/s 16A Plug 10 Nos. 7.52

10 Cost Of Old & u/s 1.5 Mains 100 Mtr. 6.30

11 Cost Of Old & u/s 2.5 Mains 150 Mtr. 8.55

12 Cost Of Old & u/s 4 Mains 50 Mtr. 11.79

13 Cost Of Old & u/s One Wire 10 Mains 20 Mtr. 9.90

14 Cost Of Old & u/s Ting Tong bell 5 Nos. 2.60

15 Cost Of Old & u/s T-5 Tube light 25 Nos. 18.00

16 Cost Of Old & u/s Ceiling fan 5 Nos. 168.30

17 Cost Of Old & u/s Ex. Fan 2 Nos. 147.24

Sign of Contractor

Dy.Executive Engineer Executive Engineer

Cap.Proj. Elect.sub.Div-21 Cap.Proj. Elect Division

Gandhinagar Gandhinagar