CA NO GE(N)AMB-89/2025-26 SPECIAL REPAIR OF 06 X WASHROOM IN BLDG NO P-17 (OR LIVING AREA) OF CSR UNDER AGE B/R-I OF GE (NORTH) AMBALA CANTT

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc ,complete all as specified and as directed.

Material and labour for rendering 15mm thick even and smooth(Without using extra cement) in cement plaster 1:6 on fair faces of brick work or concrete surfaces, complete all as specified and as directed.

Material and labour rendering 15 mm thick (in patches) on brick work or concrete wall surfaces in cement mortar (1:4) including mixing water proofing compound @ 2% by weight of cement or as per manufacturer's instruction and finished even and smooth without using extra cement complete, all as specified and as directed. ( Note- The cost of providing WPC shall be measured paid for seperately)

Supply only Integral waterproofing compound complete all as specified and as directed.

Material and labour rendering 05 mm thick on any faces of brick work or concrete ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement ,complete all as specified and as directed.

Material and labour for preparation of new plaster surface on walls and applying two coats of acrylic distemper over a coat of alkali resistant primer over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces ,complete all as specified and as directed.

Material and labour for preparation of new plastered /concrete surface of wall applying of two coats of cement base paint over a coat of primer complete all as specified and directed.

Material and labour for preparation of new plastered surface of ceilling applying three coat white wash complete all as specified and directed.

Material and labour complete removal of existing treatment from wall by scrappers or any other means and washing , rubbing down and stopping applying two coats of acrylic distemper over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, of walls of any description using painting roller after preparation of brick/concrete, plastered / unplastered surfaces of walls complete all as specified and as directed.

Material and labour complete removal of existing treatment from wall by scrappers or any other means and washing , rubbing down and stopping and applying two coats of cement based paint with painting roller , complete all as specified and as directed.

Material and labour for preparation of old decorated brick/concrete, plastered / unplastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white lime wash on prepared surfaces of ceiling etc. complete all as specified and as directed .

Dismantling of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed.

Material and labour brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 ,complete all as specified and as directed.

All as per serial item No.13 here in before but except bricks old servicable bricks obtained from serial item No 12 above including removing mortar,cleaning the bricks with water, ,complete all as specified and as directed.

Material & Labour brick work with sub class -B bricks, in half brick thick walls, built in cement moratr 1:4 straight or curved on plan to any radius , ,complete all as specified and directed.

Demolition of cement concrete of any description ( incl floor tiles and or PCC below tiles) in any position not otherwise specifically provided for complete all as specified and directed by Engr-in- charge.

Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed.

Taking down chowkats or frames with shutter area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed.

Material and labour for factory made 35 mm thick 2nd class hard wood glazed and skeleton shutters,open rebated and prepared to receive glass , gauze etc. (without sash bars) ,edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I, Section-8, clause 8.24 (a) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for factory made 2nd class hard wood 35 mm thick plain framed panelled shutter( two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both face . The size of rail and style as per IS:1003 (Part-1) kiln seasoned and chemically pressure treated complete all as specified and as directed by the Engineer-in-Charge.

Material and labour rolled mild steel framed work as in chowkats of door or gates of angle or other section with gusset plates, rails braces etc. complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging ,door fitting (exclusive of steel sheeting or other covering, running rails and guides) also fastening and fixing conforming to Fe–410–W (Grade E–250) quality 'A' ,complete all as specified and as directed.

Supply and fixing mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate including fixing to steel frame complete all as specified and directed.

Supply and fixing of factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick (styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing complete all as specified and as directed.

Supply and fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on single side used instead of plain colour PVC sheet reinforced with MS square tube, edges will be painted to match with prelaminated sheet and fixed in opening complete all as specified and as directed .

Material and labour sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane ,complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed .

Supply and fixing for aluminium anodised 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

Supply and fixing for aluminium anodised barrel tower bolts of extruded section and fixed of 150mm long complete all as specified and directed.

Supply and fixing for 150mm long aluminium handles cast type anodized complete all as specified and directed.

Supply and fixing double shutter steel window box type ERW hollow P section comprising of glazed and gauged skeleton shutter fabricated from following sections :– (a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces. (b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T – section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf. (c) Vertical mullion shall be ERW hollow T –section of size 60 x 25 mm made from 1.25 mm thick MS sheet (d) The above steel window shall be deemed to include the following accessories/ fittings : i) Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape– 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt stove enamelled 150mm long– 2 Nos per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square – 01 No per leaf vi) Pintal hinges 12 x 75 mm – 2 Nos each leaf vii) 10mm square Guard bar @ 10 cm c/c welded to frame. (viii) Two coat of Synthetic enamel paint over one coat of red oxide primer. (ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 03 mm with steel screws. (x) 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window. (xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B–1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed. Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above. (iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type.

Supply and fixing box type using ERW hollow 'P' section ventilators fixed type with glazing bar including MS grills of square bar 10mm dia @ 100 c/c complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer , ,complete all as specified and directed.

Material and labour for tinted sheet glass 4.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directed.

Material and labour PCC 1:3:6 type B-I using 20mm graded stone agg as in holdfasts complete all as specified.

Material and labour PCC 1:4:8, Type D–2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour plain cement concrete 1:2:4 type B–1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork for rough finished surfaces of concrete ,complete all as specified and as directed.

Supply and fixing 250mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter ,complete all as specified and as directed by Engr-in-charge.

Supply and fixing galvanised mild steel wire cloths 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised mild steel wire staple ,complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises ,complete all as specified and as directed.

Material and labour 25 mm thick PCC 1:2:4, type B–0 as in sub base floor (using 12.50mm graded crushed stone aggregate), finished even & fair without using extra cement complete all as specified and as directed.

Material and labour non–skid ceramic coloured tiles joint free premium/1st quality (square/rectengular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed 15 mm thick in cement mortar 1:6 ,complete all as specified and as directed.

Material and labour glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/ skirtings /dados of size 300 x 600 x 7 to 8 mm thick or nearest size as required, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 ,complete all as specified and as directed.

Supply and fixing bib taps 15mm bore fancy type brass chromium plated with long body, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair ,complete all as specified and as directed.

Supply and fixing fancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe as in repair ,complete all as specified and as directed.

Material and labour 75mm bore PVC (SWR) floor trap with grating including jointing with solvent cement including fixed in cement concrete as in repair complete all as specified and as directed.

Supply and fixing 15mm bore cast copper alloy chromium plated angular stop valves with capstan head, screwed down, high pressure screwed both ends for iron pipe or for unions as in repair ,complete all as specified and as directed.

Supply and fixing in repair of ISI marked 20mm bore stop valve, fancy type, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.

Supply and fixing 15mm bore cast copper alloy fancy type chromium plated stop valves with long shank and cup (concealed type), screwed down, high pressure with capstan head, screwed both ends for iron pipe or for unions as in repair ,complete all as specified and as directed.

Supply and fixing PVC connections 15 mm size with PTMT nuts of length 450 mm as in repair ,complete all as specified and as directed.

Supply and fixing as in repair brass chromium plated shower rose 100mm size swivel type with arm of standard size as per site suitable for 15mm bore pipe ,complete all as specified and as direced.

Cutting chases to brick wall built in cement mortar, pinning in making good to facing where required and pointing in CM 1:3 to edges of landing , steps , cills , sunshades, shelves , lintel etc. and cutting chases for concealed water tubing etc and making good cutting not exc 10 cm girth complete all as specified and as directed .

Supply and fixing as in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges ,complete all as specified and as directed.

Supply and fixing vitreous china squatting pan, Orissa pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe as in repair ,complete all as specified and as directed.

Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including water closet pvc seat cover white closed pattern with flat bottom and cover including making connections and fixed in position as in repair ,complete all as specified and as directed.

Supply and fixing mild steel chromium plated hand shower (health faucet ABS body) suitable for 15mm dia pipe with 8 mm dia 1.25 mtr long flexible tube and ABS wall hook including making connection as in repair ,complete all as specified and as directed.

Supply and fixing 10 ltr PVC valveless syphonic action type flushing cistern with brackets, flush pipe etc complete including inlet ball valve float and handle including brackets, of approved make including all connectionSupply and fixinglush pipes for WC as in repair ,complete all as specified and as directed.

Supply and fixing vitreous china wash hand basin white, flat back of size 550mm x400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc as in repair ,complete all as specified and as directed.

Supply and fixing as in repair vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe) but including brass chromium plated spreader, PVC waste pipe, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) ,complete all as specified and as directed.

Supply and fixing in repair vitreous china urinal partition white of size 310 x 700mm, complete all as specified

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing for galvanised iron tubing 15mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors , including taking down of existing unserviceable GI tubing including all fittings etc ,complete all as specified and as directed.

Supply and fixing for galvanised iron tubing 20mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors , including taking down of existing unserviceable GI tubing including all fittings etc ,complete all as specified and as directed.

Supply and fixing 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall ,complete all as specified and as directed.

Supply and fixing 75mm bore PVC (SWR) bends of any radius ,complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required (Internal dia of pipe in 100mm) complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, in floor or fixed to wall ,complete all as specified and as directed.

Supply and fixing 110mm bore PVC (SWR) bends of any radius ,complete all as specified and as directed.

Supply and fixing bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

Supply and fixing 75mm bore `spun pipes` cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fixing 100mm bore `spun pipes` cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fixing of 75mm bore bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed .

Supply and fixing of 100mm bore bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

Supply and fixing as in repair of 100mm bore cast iron cowls, complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100mm bore pipe line complete all as specified and as directed.

Supply and fixing in repair CP soap dish approximate size 160x 160x90mm embedded in the wall complete all as specified and as all directed.

Material and labour for PCC 1:5:10 Type E2 using 40mm graded stone aggregate as in filling in sunken portion floor ,rounded or chamfered on edges including dismentling of existing treatment of any type, complete all as specified and as directed .

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work including cutting of steel reinforcement as required to facilitate demolition and removal the rubbish/ demolished material outside defence land, complete all as specified and as directed.

Material and labour for reinforced cement concrete (nominal mix) Type B–1, 1:2:4 (20 mm graded crushed stone aggregate) in chajja etc including necessary formwork /scaffolding upto 8mtr height complete all as specified and directed.

Material and labour reinforced cement concrete 1:1–1/2:3 (Nominal Mix) using 20mm graded crushed stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like and incl necessary formwork complete all as specified and as directed.

Material and labour TMT steel bars 10mm dia and over cut to length, bent to shape reqd incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.

Material and labour for mild steel TMT bars of 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., work in rough finished flat surfaces of concrete complete all as specified and as directed .

Material and labour for sunken floor water proofing treatment complete all as under :– (A) Scrapping the surface with wire brush and cleaning with water and allow to dry. (B) Applying cement slurry @ 1.2 kg/sqm duly mixed with water proofing compound. (C) 15 mm thick cement plaster 1:3 mixed with water proofing compound as per manufacture instruction (the corner will made rounded in concave shape). (D) Applying cement slurry @ 1.2 kg/sqm duly mixed with water proofing compound. (E) Apply one coat of hot bitumin grade 85/25 conforming to IS 702 @ 1.2 kg/sqm. (F) Supply and laying APP with non woven polyster reinforced sheet 3mm thick weight not less than 3.00 kg/sqm. (G) Applying one coat of hot blown bitumin grade 85/25 conforming to IS–702 @1.20 kg/sqm. (H) Curing the sunken portion with water min 48 hours by ponding. (J) Fixing 50mm bore GI pipe medium grade as in spout of 0.60 mtr length in each sunken.

Note:- Amount of credit of Rs. 32,053.00 for retrieved materials is mentioned in Schedule of Credit Page No. 123 of tender doCubic metre ents in pdf form which will be deducted offline while acceptance of tender.