REPAIR TO DRAIN GARBAGE BIN AND INCINERATORS ETC AT NAGTALAO UNDER GE BANAR

Amount

Demolition brickwork or stone masonry, built in cement mortor including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stonework and precast concrete articles complete all as specified.

M&L for squared rubble walling Jodhpur type brought upto courses, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified.

All as per Item Ser No 2.00 here in before but except stone

Extra over item 2 & 3 for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm & dressing face beds and joints as specified to squared rubble walling, jodhpur type, brought upto courses complete all as specified.

M&L for keyed pointing to squared rubble, coursed or uncoursed stone masonry wall in CM 1:4 complete all as specified.

M&L for cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate in surface channels and drains complete all as specified.

Supply MS round bar 10mm dia conforming to Fe 290 Gde E-165 including binding with MS wire for Incinerator mesh complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&F framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete incl pintel hinges, stops hand made sliding bolts etc conforming to Fe 410-W (Gde-E-250) quality-A, including taking down old steel gates complete all as specified.

Excavation in trenches, n. exc 1.50 mtr wide and n. exc 1.50 mtr in depth, for foundation, etc or manholes, pier holes etc n .exc 10 Sqm on plan and getting out in any type of soil all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed above the starting point complete all as specified.

Checking and attending to complaints to cleaning /removal of sewage block in existing line any depth from WC to first manhole or gully trap to manholes including cleaning of WC and testing of pipe by pouring water 100 mm SGSW/RCC/CI pipe for ground floor qtr complete all as specified.

Checking and attending to complaints to Cleaning/removal of blockage in the existing line in any depth and bathroom to first manholes or kitchen to gully traps or gully trap to manholes including cleaning of bathroom and WHB trap and kitchen floor trap and testing of pipe by pouring water manhole 75mm SGSW/RCC/CI pipe for ground floor qtr complete all as specified.

Cleaning of manholes complete of any size and at any location incl taking out sludge and other material deposited in manhole and its disposal to a distance n exc. 50 M complete all as specified for depth of manholes as given below:- (a) Depth of manhole n exc 1.00 M

All as per item No 15.00 above but Depth of manhole exc 1.00 M & n exc 2.00 M complete all as specified.

Cleaning/Removal of sewage block in the existing line incl cleaning of complete line laid at any depth and at any location between two consecutive manholes/gully trap for the following :- (a) Two consecutive manhole or gully trap to manhole incl testing the pipe by pouring water from manhole all as directed to the entire satisfaction of Engr-in-Charge for 150mm bore SGSW/RCC pipe (NP2).

All as per item No 17.00 above but 200mm bore SGSW/RCC Pipe (NP2) complete all as specified.

Cleaning of septic tanks of any capacity & any size by taking out sludge (working condition is in foul condition) & removing the sludge to outside defence land in closed vehicle complete all as specified.

Demolition and breaking up drain pipes (Salt glazed stone ware,AC, or Reinforced concrete) 100mm dia set in cement mortar including PCC bed to drain pipe, packing under & haunching against the sides of drain pipes complete all as specified.

All as per item No 20.00 here in above but 150mm bore pipe complete all as specified.

All as per item No 20.00 here in above but 200mm bore pipe complete all as specified.

Reinforced concrete pipes of 100 mm bore , class NP2, laid and jointed complete with collars complete all as specified.

Reinforced concrete pipes of 150 mm bore , class NP2, laid and jointed complete with collars complete all as specified.

Reinforced concrete pipes of 200 mm bore , class NP2, laid and jointed complete with collars complete all as specified.

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) in bedding and haunching against the side of reinforced concrete,class NP2 pipes for 100mm dia bore after they are laid and tested complete all as specified.

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) in bedding and haunching against the side of reinforced concrete,class NP2 pipes for 150mm dia bore after they are laid and tested complete all as specified.

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) in bedding and haunching against the side of reinforced concrete,class NP2 pipes for 200mm dia bore after they are laid and tested complete all as specified.

Supplying and laying in repair of 75 mm dia UPVC pipes SWR & Plain UPVC SDR 11 fittings in trenches complete all as specified.(with all fitting)

Supplying and laying in repair of 110 mm dia UPVC pipes SWR & Plain UPVC SDR 11 fittings in trenches complete all as specified. (with all fitting)

Supplying and laying in repair of 75 mm dia UPVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified. (with all fitting)

Supplying and laying repair of 110 mm dia CPVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified. (with all fitting)

S&F 75 mm bore UPVC bends any radius with oval acess door complete all as specified.

S&F 110 mm bore UPVC bends any radius with oval acess door complete all as specified.

S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified.

S&F 75 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified.

S&F 110 mm PVC (SWR) reducers complete all as specified.

S&F 75 mm PVC (SWR) reducers complete all as specified.

Dismantling of cast iron drain pipes, jointed in cement mortar and taking out of trenches & walls , if required 75/100 mm bore complete all as specified.

M&L for 75 mm Cast iron soil, sand cast pipe , waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including all fitting etc tee, socket, bend complete all as specified.

M&L for 100 mm Cast iron soil, sand cast pipe ,waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including all fitting etc tee, socket, bend complete all as specified

M&L for 75 mm Cast iron soil, sand cast pipe ,waste and vent pipes in any length with or without ears, with cement joints, fixed in walls including all fitting etc tee, socket, bend complete all as specified.

M&L for 100 mm Cast iron soil, sand cast pipe ,waste and vent pipes in any length with or without ears, with cement joints, fixed in walls including all fitting etc tee, socket, bend complete all as specified.

Provide and lay Machine cut sand stone slabs of thickness 5 cm in sun shades, chajjas, shelves, cills, landing, coverstones, templets,etc. n exc 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 complete all as specified.

S&F for 75mm thick steel fibre reinforced (SFRC) man hole/ drain cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified.

M&L for brick work straight or curved on plan to any radius, built in 1:4 as in half brick thick wall complete all as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc complete all as specified.

M&L rendering 15 mm thick in CM 1:4 including WPC on stone masonry surfaces or on brick masonry finished even and smooth without using extra cement complete all as specified.

M&L Rendering 10 mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces be finished even and smooth (without using extra lime or cement) complete all as specified.

M&L for three coats of white wash on walls including preparation to plastered or unplastered surfaces of walls complete all as specified.

M&L for two coat of cement base paint over a coat of white wash on new plastered or unplastered surfaces of walls after necessary preparation of surfaces complete all as specified.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate 50 mm thick as in plinth protection complete all as specified.

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified.

Excavation in post holes or similar holes in earth/concrete surface each not exc 0.5 cum getting out returning, filling in and ramming earth/broken rubble mixed with earth around in layers n exc 25cm , watering and removing surplus soil to distance not exceeding 50m and making good surface in soft/loose soil complete all as specified.

S&F Fe-410-W (Gde E-250) quality-A rolled steel sections/hollow sections as in main and cross beams, purlins, where connected to common rafters and running rails fixed with angle cleats or other connecting plates complete all as specified.

S&F MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut for 12mm dia shank and length of bolt exc 5cm and n . exc 10cm long.

Dismanteling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of camoflague colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with hot dip galvanised self drilling fasteners with EPDM washers (one fastener on each crest) complete all as specified.

M&L for preparing new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified.

Supply and laying 80mm thick factory made chamfered edge cement concrete rubberised paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified.

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified.

vinayandsons (BID ID -3076556)

S AND S Constructions (BID ID -3065549)