Provn of construction of black top surface Road for ksp and tok pump and Special repair to Road and road Furniture approaching air field near 669 Hanger and ATC bldg at ralawas under AGE(I) Nagtalao in army area jodhpur

Amount

Surface excavation not exc 30 cm deep and avg 15 cm deep and getting out in any type of soil all as specified & directed by Engineer-in-Charge.

Removing excavated material (soil) to a distance n exc 50m and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified & directed by Engineer-in-Charge.

Rolling and consolidating to reqd gradient and camber of formation surface (in cutting) of road with 8 to 12 tonne power roller including filling in depressions which occur during rolling complete all as specified & directed by Engineer-in-Charge.

200 mm thick (spread thickness) soiling (or sub base) with crushed or broken stones of grading 63mm to 90mm interstices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller complete all as specified & directed by Engineer-in-Charge.

M&L 150mm thick (compacted thickness) WBM in two layers (each layer 75 mm thick) with coarse aggregates ( Limestone, sand stone, Flint or Quartzite) of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required as specified & directed by Engr-in-charge.

M&L for Preparation of WBM surfaces by brushing with wire brushes for removing caked mud etc. and sweeping with brooms and dusting/fanning the cleaned surface with gunny bags to remove dust, dirt etc all as specified & directed by Engineer-in-Charge.

M&L Applying Paving bitumen evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre as specified & directed by Engr-in-charge.

M&L for applying bituminous premixed semi dense asphalitic concrete 40 mm consolidated thickness with 5.5% binder content of grade VG-40 by weight of total mix rolled and compacted with 8 to 12 tonne power roller to required camber and gradient to achieve a uniform smooth surface complete as specified in clause 20.A27 MES SSR Part-I and the spreading of premix carpet be done by mechanical paver only).

S&F road studs (cat eyes) of size 100mm x 100mm x 20mm made from PVC including two highly reflectors moulded mounted on both sides of cat eye fixed with epoxy/iron nails, all as specified & directed by Engineer-in-Charge.

S&F for speed hump (Breaker) of size 600mm wide in colours PVC moulded type with arrangements of higly reflectors on both sides fixed to road surface with epoxy/iron nails as per manufacturer instruction all as specified & directed by Engineer-in-Charge.

S&F for solar stud cat eyes of size 132.5mm x 122.5mm x 20mm in red colours made of aluminium alloy powdered by mono crystal solar panel moulded with one high capacity Ni cad battery and backup of 12 hours continious plingly light at night complete fixed to road surface with epoxy/iron nails Make:- DARK EYE/3M/TATA BP

S&F delinator of size 700x100x50mm made of ABS round body fitted with two nos. 100mm dia highly reflective reflector, duly UV stabilized, in yellow colour, provided with Test Certificate from CRRI New Delhi, mounted on MS pipe 50mm dia, provided with anti rust and anti theft net including excavation in post holes of size 30cmx 30cmx45cm and filling with concrete 1:2:4 type B1 and making good all as specified & directed by Engineer-in-Charge.

M&L for cleaning and preparation of Road or concrete surface for making center line, stop line, dashes, arrows, brackets & similar works with 2.0mm thick white/yellow colour hot applied IRC pattern thermo plastic paint (Confirming to BIS 3262-1989) of approved quality and make with 8% glass beads laid on the surface at temperature 160 degree Celsius with a special applicatomachine complete. (use of 5 Kg thermo plastic material per Sqm) including traffic diversion arrangement all as specified & directed by Engineer-in-charge.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate for kerb stone along road side with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM(1:4) with joints to match including excavation & earth work and removing soil all as specified & directed by Engineer-in-charge.

M&L Applying two coats of synthetic enamel paint on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described including preparation of new surface & priming paints plaster coat as specified & directed by Engineer-in-Charge.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with broomes and finally fanning the cleaned surfaces with gunny bages to remove all loose dirt etc.

Applying evenly a tack coat on black top surface with paving bitumen VG-10 grade @ 5 Kg/X sqm complete all as specified and directed.

M&L for applying bituminous premixed semi dense asphalitic concrete 30 mm consolidated thickness with 5.5% binder content of grade VG-40 by weight of total mix rolled and compacted with 8 to 12 tonne power roller to required camber and gradient to achieve a uniform smooth surface complete as specified in clause 20.A27 MES SSR Part-I and the spreading of premix carpet be done by mechanical paver only).

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water,scoring sunken surfaces in raods, paths, etc. cutting arounds edges to at least 25mm in depth, making good by filling in screened and graded road metal watering and well raming (incl supply of metal) complete.

DEEKSHA BUILDERS

MAHARISHI GAUTAM CONSTRUCTIONS