Construction of road and road side drain and dressing of berms road leading from Main road to M/S Surya Textube at I.A. Kala Amb Distt. Sirmour (HP). (SH- Balance work, providing and laying interlocking pavers from main road to M/S Pidilite Indust

Amount

Construction of embankment with material obtained from roadway cutting: Construction of embankment with approved material deposited at site from road way cutting and excavation from drain and foundation of other structure graded and compacted to meet requirement of Table 300.1 and 300.2 as per Technical specification Clause 301.5 including carriage of materials through all modes of transportation with in all leads and lifts and as per direction of the Engineer-in-charge.

Wet Mix Macadam: Providing & Laying , spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (pug mill) , carriage of mixed material by tipper to site, laying in uniforms layers in sub base /base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100 KN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc. as per Tables 400.12 and technical specification clause 406. including carriage of materials through all modes of transportation with in all leads and lifts and as per direction of the Engineer-in-charge.

Providing & laying cement concrete 1:4:8 (1cement: 4sand: 8graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth. Including carriage of materials through all modes of transportation with in all leads and lifts and as per direction of the Engineer-in-charge.

Providing & laying of interlocking cement concrete paver block pavement 80MM thickness (M30 Mix) as per drawings and technical specification clause 1504 of MORD & SP-63-2018 i/c bedding sand 30mm thick and to be manufectured in an appropriate plant with high frequency hydrulic press machine with controlled viberation and paving blocks with proper compaction . The contractor shall get prior approval of the paver blocks test samples of approved makes from the Engineer-in-incharge with in 15 days prior to the commencement of laying of block at site.Including carriage of materials through all modes of transportation with in all leads and lifts and as per direction of the Engineer-in-charge.

Plain/reinforced cement concrete in substructure complete as per drawing and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 for height up to 5 m i) RCC grade M-25 (1:1.5:3) Including carriage of materials through all modes of transportation with in all leads and lifts and as per direction of the Engineer-in-charge.

Providing to steel reinforcement for RCC work including bending, binding and placing in postion complete upto floor two level.Including carriage of materials through all modes of transportation with in all leads and lifts and as per direction of the Engineer-in-charge.

Excavation in drain and channels etc. in earth work in all kind of soil lifts upto 1.5 mtrs. stacking the excavated soil not more than 3mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers etc. consolidating each deposited layers by ramming and watering and then of all surplus excavated earth.Including carriage of materials through all modes of transportation with in all leads and lifts and as per direction of the Engineer-in-charge.

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of grannular material in single raw including fixing coller with cement mortar with 1:2 but excluding excavation ,protection work backfilling , concrete and masonary work in head walls and parapets Clause 1106. (i) 600 mm dia. Including carriage of materials through all modes of transportation with in all leads and lifts and as per direction of the Engineer-in-charge.

Boundary Pillar: Reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC: 25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704. Including carriage of materials through all modes of transportation with in all leads and lifts and as per direction of the Engineer-in-charge.

Painting two coats on new concrete surfaces: Painting two coats including priming coat after filling the surface with synthetic enamel paint in all shades on new, plastered concrete surface as pe drawing and Technical Specification Clause 1701. Including carriage of materials through all modes of transportation with in all leads and lifts and as per direction of the Engineer-in-charge.

HARI SINGH

DEEP CHAND

Virender Pundir

ANIL KUMAR

RAJ KUMAR

Sanjeev Sharma

DINESH KUMAR GUPTA

Nikhil

DASU RAM

[email protected]

SUBHASH CHAND GOVT CONTRACTOR