Supply and Laying Cable for Balurghat DH.

Supplying and fixing 415V, TPN SFU open execution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.

i) 100 A TPN SFU ( Make- L&T / Legrand /ABB / Haggar / Siemens)

i) 125 A TPN SFU (ake- L&T / Legrand /ABB / Haggar / Siemens )

Supplying and fixing 415V, TPN on load front operated Changeover switch open execution type in SS enclosure/cubical with nuts bolts etc

i) 250 A ( ake- L&T / Legrand /ABB / Haggar / Siemens )

Supply and delivery of following 1.1 KV grade XLPE AL armoured cables with submission of test report and warranty certificate for atleast 3 years from the OEM (Make: KEI, Polycab, Havells, RR Kabel//Havells) [NS]

(i) 4 core 240 sqmm [LT Panel Room to main Feeder Pillar Box]

(ii) 4 core 95 sqmm [ Souhadra Feeder Pillar to Near Morgue Feeder Pillar Box]

(iii) 4 core 35 sqmm [Morgue Feeder Pillar to Mourge TPN DB]

Laying of 4 core 240 sqmm cable on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting. (F1/2e)

Laying only 4 Core 240 sqmm Cable through existing RCC / Hume Pipe .

Laying of one No. cable of 4 Core 240 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

Laying of one No. cable of 4 Core 95 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

Laying of one No. cable of 35 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below [F4/7c]

(i) 4 core 240 sqmm

(ii) 4 core 95 sqmm

(iii) 4 core 35 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : [F5/8b]

(i) 4 core 240 sqmm

(ii) 4 core 95 sqmm

(iii) 4 core 35 sqmm

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required ( Dual Line , One For Future) i) 150 mm dia

ii) 50 mm dia

Making cable trench after cutting the pitch road with own tools and tackles with minimum depth of 600 mm and 300 mm wide and after laying of Cable through 150mm GI Pipe the trench levelling up with sand and restoring surface duly rammed and with concrete mixer of minimum depth 150mm including compacting to its original G.L. etc. complete including costs of labour and materials..

Add GST @18%

Add LWC @ 1%