ADDN/ALTN OF CUP BOARDS AND EXISTING DOORS, WINDOWS VENTILATORS WITH ALUMINIUM WINDOWS WITH FLY PROOFING AND VENTILATORS WORK AT VOHRA BLOCK AND AT HARKIRAT BLOCK EME SCHOOL, AND SPL REP BLDG P 444 OF MH VADODARA.

Amount

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each

Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each

M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble to match screed bed or bedding layer of mortar including 15mm thick screed bed for laying floor finishes in CM 1:6.

S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Note:- Aluminium members shall be measured for payment. Rates of other items shall be deemed to be included in the rate quoted

M & L for 4mm thick sheet glass, ordinary quality and glazing with rubber beading or with glazing clips, all as specified and directed.

M & L for 4mm thick sheet glass, figured quality and glazing with rubber beading or with glazing clips, all as specified and directed.

M & L for 5.5mm thick sheet glass, ordinary quality and glazing with rubber beading or with glazing clips, all as specified and directed.

S & F solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers all as specified.

M & L for 12mm thk prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screws to aluminium frame work all as specified and directed.

S&F for Framed work as in doors or gates or cupboards or grill/grating for windows or posts/struts for roof shed of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specifed and directed.

M&L for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, 6mm thick or external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE.

S&F 2nd class Hard wood 35mm thick glazed & skeleton door shutters open rebated & prepared to receive glass, gauze etc, divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and miterd beds securing glass, sizes of members of shutters as specified in SSR part -I, section 8, clause 8.20(a) and fitted to chowkats.

M&L for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description, not otherwise described over 10cm width or girth complete.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.56 mm and fixed with tinned tacks, or galvanised staples complete all as specified and directed.

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement.

Providing and fixing factory made 18(+0.7mm) thick PVC sheet one sided pre laminated sheet cabinet shutter. 18 mm(+0.7mm) thk sheet shutter of density 600 kg/m3 bent at 90 degrees and finished all edges at all level for making edges, Lipping/bending or 0.5 mm thk PVC sheet lipping at all four edges using bonding tape etc complete all as per directions of engineer in Charge & Manufacturers's speciifcations.

M & L for 100 mm butt hinges stainless steel grade 202, 14 gauge thickness medium weight fixed with pressed steel door frame / pvc door frame with screws

S&F 300mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed.

S&F 100 mm long safety type aluminium anodised hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed.

S & F 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed, all as specified.

S & F 200 mm long aluminium anodised barrel tower bolt of extruded section and fixed, all as specified.

S & F double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed.

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ150 as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ150 as in roof covering/cladding ridge or hips, valley gutter to wall, fixed with self tapping screws as specified.

S&F in repairs floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.

S&F in repairs mild steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate, bolting complete.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete

M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement all as directed.

M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distamper over and including a coat of 3mm average thick birla/equivalent wall care putty and one coat of chalk whitening primer

M & L for rendering 5mm thick on brick wall surface or concrete surfaces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement)

M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash on ceiling.

M&L Rendering in two layer on fair faces of brick work or concrete surfaces of wall 5 mm thick in CM 1:4 mixed with WPC @ 3% by wt of cement for finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 smooth without using extra cement (WPC will be measured separately).

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M & L for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M & L for preparing new steel surface of any description not otherwise described n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M & L for Cement concrete type B1, 1:2:4 (20 mm graded aggregate) as in coping, bed plate for hold fast etc.

Dismantling wall and ceiling boards or insulation board any thickness including cover fillets complete.

S&F non asbestos acoustic false ceiling 12mm thick with aluminum anodized snap grids of 60x60cm in ceiling with Tee section 35x25x1.25mm, angle section 25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger including three coats of white wash in ceiling boards . Make: Armstrong or equivalent

Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar.

M&L for non skid coloured ceramic tile 8 to 9mm thick area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6.

M&L for non skid coloured ceramic tile 8 to 9mm thick area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles.

M&L for Glazed ceramic coloured walls tiles in vertical surfaces 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles.

S&F in repairs 2nd class hard wooden beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing old beads to Store

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling etc. all as specified and directed.

M&L for Brickwork with sub class ‘B’ old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6

M & L for complete removal of existing treatment of wall surface and applying two coats of oil bound distamper over and including a coat of 3mm average thick birla/equivalent wall care putty and one coat of chalk whitening primer

M&L for complete removal of existing treatment of ceiling and applying three coats of white wash on ceiling.

Complete removal of existing water proofing treatment including plaster and concrete padding, roughening of concrete surface, cleaning and washing down the surface with water and removing debris/rubbish out side MD land complete all as specified and directed by Engr-In-Charge

M&L for 50 mm avg thick PCC padding in cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggr mixed with WPC @ 2% by wt of cement finished surface even and fair without using extra cement for laying of WPT all as specified and directed. (WPC will be measured and paid separately).

M&L 10mm thick rendering on roof in CM 1:3 mixed with WPC @ 3% by wt of cement for finished even and smooth without using extra cement over PCC surface for laying APP membrane on roof (WPC will be measured and paid separately).

Supply only Integral water proofing compound all as specified and directed.

M&L for water Proofing treatment to roof slabs by applying one coat of bituminous/polymerized primer confirming to IS-3384 @ 0.30 Ltrs/Sqm, and laying atactic polypropylene (APP) modified membrane pre fabricated , reinforced with non woven polyester, of minimuum 3.5 Kg/Sqm, 3 mm thick (minimum) with minimum 75 mm side overlaps and minium 100 mm end overlaps and applying one coat of aluminium paint @ 0.11 Kg/Sqm over APP membrane complete all as specified and directed by Engr-In-Charge

M & L for brushing with neat cement slurry @ 3Kg/Sqm over roof surfaces

S&F hospital curtain channel of aluminium section for sliding curtains including bending of sections as required incl end stoppers, curtain runners (made up of good quality plastic & minimum 10 runners per meter of channel) and fixing MS clamp (minimum 600mm long) to ceiling to support curtain channel complete all as specified & directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.

Supplying and laying of UPVC SCH-40 pipes of 15mm bore with fittings complete all as specified.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.

S & F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge.

S & F 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

S&F in repairs 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall/floor as in waste/soil pipe complete all as specified and directed

S&F in repairs 75 mm dia PVC (SWR) bends of any radius with duck foot or heel rest fitted with oval access door complete.

M&L in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete type B1, 1:2:4 for 75mm bore.

S & F in repairs Vitreous China wash down water closet pan pedestal pattern (Europian type) (excluding flushing cistern and flush pipe) plastic seat black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device.

S & F in repairs PVC valvless syphonic action flushing cistern low level white of 10ltrs capacity with inlet ball valve float and handle including bracket.

S&F in repairs health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs PVC connection 600mm long of dia 15mm complete.

S&F in repair Vitreous China wash hand basin, angle back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including CI bracket and nut bolts as per maufacturers instructions.

S&F in repairs 32mm dia flexible waste pipe for urinal, wash basin and kitchen sink for length exc. 1m not exc 2m complete.

S&F in repair SS waste coupling of 32mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed.

S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capston heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F 15 mm bore elbow operated Pillar tap for operation theatres including all necessary fittings complete all as specified and directed. Make: Cera or equivalent

M&L for 100 mm thick PCC 1:4:8 mix ,type D-2, using 40 mm graded stone aggregate as in tank staging complete all as specified & directed.

S&F in repairs 1000 ltrs rotational moulded double layred, polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including disconnecting existing tanks,

Polishing of old existing Kota stone flooring i.e, grinding, joints pigment filling and polishing to get mirror finish all as specified and directed.

M & L for reinforced cement concrete1:2:4, type B1, using 20 mm graded stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span.

Use & waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L for mild steel TMT bars 6mm to 8mm dia, cut tolength, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Excavation in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations, for laying cables/ pipes etc. or not exc 10 Sqm on plan and not exc 1.5m in depth for shafts, cesspits, manholes, pier holes, etc. and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, excavated approved soil spreading, leveling, watering and well ramming in layers not exc 25cm thick each complete all as specified. .

Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and directed.

M&L for UPVC (SWR) 110mm dia pipes for sewage line of 6Kg/Sqcm including dismantling existing Stone glazed stone ware pipe/AC or Reinforced concrete complete all as specified and directed.

M & L for concrete bed to drain pipes 100mm bore including packing under, and haunching against the sides of pipes after they are laid and tested in plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate including demolition of damaged concrete complete all as specified & directed.

M & L for plain cement concrete type 1:4:8 D-2, using 40mm graded stone aggregate in foundations, filling and mass concrete with necessary form work complete as required & directed.

M & L for plain cement concrete type 1:2:4 B-1, using 20mm graded stone aggregate in surface channels, drains and coping with necessary form work complete as required & directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repairs precast steel fibre reinforeced concrete drain covers, factory made in cement concrete 1:2:4 type B1 using 20mm graded stone aggregate with and including reinforcement of 8mm dia TMT bars at 150mm c/c both ways including MS frame at the edges of cover and handles 2 Nos each cover made of 12mm dia MS round bar, set in CM 1:6 complete, thickness and sizes of covers shall be as directed by Engineer-in-Charge.

Taking down carefully existing unserviceable copper/aluminium point wiring (light, fan, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators, etc (except tube light fittings), removing materials for taking credit and making good disturbed surface of wall, floors, etc complete all as directed by Eng-in-Charge.

M & L Point wiring complete with 1.5 sqmm single core PVC insulated (FRLS) and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC Conduit and all accessories Concealed in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc complete including cutting of chases where as required and making good all disturbed work to match the existing all as specified and as directed for the following:-

(a) One light point controlled by one switch.

(b) One fan point controlled by one one way switch & fan regulator.

(c) One exhaust / wall mounted fan point controlled by one switch.

(d) One 3 pin socket outlet 5 Amps independent board.

(e) One 3 pin socket outlet 5 Amps on the same board with other switch.

All as per item No. 94 here-inbefore but with 2.5 sqmm PVC insulated multistranded flexible unsheathed copper conductor inclusive of 2.5 sqmm PVC insulated multistranded flexible copper conductor for one independent 6 pin 16 Amp socket.

S & F for switch piano flush type SP one way 6 Amp.

S & F for switch socket combination 2 in 1, 3 pin, 6 and 16 amp flush type universal.

S & F for switch socket combination 2 in 1, 6 amp flush type universal.

S & F for Socket outlet 2 in 1 , 3 pin, 6 Amps flush type.

S & F ceiling rose surface polycarbonate body three terminal.

S & F LED ceiling light fitting of size 600mm X 600mm, 36 Watt, 220 Volt AC recessed type with high efficiency PMMA diffuser with soft glare free light complete with drivers, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete including taking down old unserviceable existing light fitting complete all as specified and directed.

S & F sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 Amp. Make Legrand/ Schneider/ABB/C&S

S & F Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings including LED lamp 7watt complete all as specified and directed.

S & F of LED light fitting 1X20Watt, 220 Volt AC decorative box type with drivers, holders and including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old unserviceable existing light fitting complete all as specified and directed.

S & F of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unserviceable existing light fitting complete all as specified and directed.

S & F of exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers, 50Hz, RPM 1200, copper winding of sweep 300mm including exhaust fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down existing UNSV exhaust fan complete all as specified and directed. Note : 1) Old unserviceable Exhaust fans shall be deposited to AGE E/M store yard for re issue to other buildings after repair/servicing or suryed off as per procedure in vogue etc. complete all as specified and directed

M & L for sub main wiring complete with two runs of 6.0 Sqmm FRLS single core PVC insulated insheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including rigid PVC casing and capping ISI Marked medium grade with all connected accessores con wall/ floors etc with one run of 6.0 sqmmm FRLS single core multistranded copper conductor as earth continuity conductor complete including taking down old sub main wiring and cutting of chases where as required and making good all disturbed work to match the existing all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of casing caping & one run of earth continuity conductor shall be measured as one running metre.

M & L for sub main wiring complete with two runs of 4.0 Sqmm FRLS single core PVC insulated insheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including rigid PVC casing and capping ISI Marked medium grade with all connected accessores con wall/ floors etc with one run of 4.0 sqmmm FRLS single core multistranded copper conductor as earth continuity conductor complete including taking down old sub main wiring and cutting of chases where as required and making good all disturbed work to match the existing all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of casing caping & one run of earth continuity conductor shall be measured as one running metre.

S & F for sheet metal enclosures distribution board double door,TPN vertical suitable for fixing of Four pole MCCB as in commer & MCBs SP as out going and duly fitted with Bus bar, Neutral link, blanking plates etc complete.The DB shall be included with one No MCCB, 4 pole, 415/430 63 Amps Volt, fixed megnatic and thermal release, having rupturing capacity 16 KA on 415 V icu. Make of DB and Make of MCCB shall preferably of same make fixed on wall complete with all acessories including taking down old unserviceable MCB DB with MCBs complete all as specified and directed. ( MCB s required for out going shall be measured and paid separately)

S & F sheet metal enclosures (double door) for DBs where MCBs to be used, single pole and neutral 8 way 240 V with 200 amps rated bus bar fixed on wall complete with all acessories including taking down old unserviceable MCB DB with MCBs complete all as specified and directed

S & F incl connecting MCB single pole, rupturing capacity 10KA, 6 amps to 32 amps as ordered 240 Volts

S & F MCB Single pole and neutral (SPN), rupturing capacity 10KA, 240 V 63 amps

Taking down existing earthing and M & L Earthing complete with galvanised steel earth plate electrode, 60x60cmx 6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level,connected to galvanised earth lead wire 4.0mm dia by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including necessary earthwork and excavation in any soil strata

S & F of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket made out of GI pipe light grade 32mm bore not less than 1.20m long bent to shape required fixed to pole with suitable size 2 Nos clamps made out of 25X3mm flat iron with nut, bolts and washers complete complete all as specified and directed

S & F of ceiling fan complete with blades, down rod from existing roof / truss/false ceiling ceiling, electronic regulator and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor including ceiling fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down existing UNSV ceiling fan complete all as specified and directed. Note : 1) Old ceiling fans shall be deposited to AGE E/M store yard.

M & L for sand cushoning to cable with river sand and punning to provide required cover for UG cables complete Note: Punned thickness shall be measured for payment

M & L for brick protection to electric cable with sub class 'B' old size bricks laid dry and flat abutting each other with gap between adjascent not exceeding 10mm.

Supply and laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of nominal cross section 70sq. mm 3.5 Core

M & L for galvanized steel tubing light Grade of 50 mm dia as in protection of cable fixed to pole/walls or laid in floors, road crossing or in trenches, ducts with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and directed.

Supplying and laying in trenches 25 mm bore Tubes, medium grade, galvanised, with all fittings.

Supplying and laying in trenches 20 mm bore Tubes, medium grade, galvanised, with all fittings.

S& F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S& F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

Cutting existing steel tubing for alterations or additions (Each cut measured) including providing and inserting new Tee/bend/elbow all as directed by Engr-in-charge.

Shree Vaishno Enterprises