PROVN OF ALUMINIUM CASING AND SCAFFOLDING FOR INSTALLATION OF RGB LINER LIGHTS ON BLDG NO P-9 AND ADDN/ ALTN OF GARDEN LIGHT, SECURITY LIGHT, PATHWAY LIGHTS AND ITS CONNECTED WORKS AT NHO DEHRADUN

Designing, Fabricating & Installation of aluminum sheet casing for concealment of RGB linear lights at different levels of building elevation. Casing made up of 1.2mm thick aluminum sheet duly powder coated in color and size as required in combination of 1200MM (L) X 125mm(D) X 150MM(H) & 1800MM (L) X 125mm(D) X150MM(H) with 25MM Collar on two sides for installation with steel crews. Installation to be done with 25mm Z supports for anti-sagging purpose & jointing of casing sections to give seamless view.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m center to center, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scafolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scafolding system shall be stifened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scafolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scafolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scafolding in the existing item to be done

Supply, installation, testing & Commissioning of LED projector light fixture 90W, LED, RGB/RGBW (DMX512 Compatible), IP 66. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK07. Voltage input AC240V, 50Hz. The luminaire should have options for various beam angle: 10°/25°/40°/60°. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt the light fixture. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature and LEDs of CREE / OSRAM / NICHIA to be used. Minimum Light fixture Lumen output atleast 3600Lumens @ full power. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements.

Supply, installation, testing & Commissioning of LED projector light fixture 36W, LED, RGB/RGBW (DMX512 Compatible), IP 66. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK07. Voltage input 24V DC. The luminaire should have options for various beam angle: 10°/25°/40°/60°. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt the light fixture. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature and LEDs of CREE / OSRAM / NICHIA to be used. Minimum Light fixture Lumen output atleast 3600Lumens @ full power. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements.

Supplying ,laying, commisioning,and testing of 1.1KV grade XLPE insulated PVC sheathed steel armoured aluminium stranded conductor LT UG cable ( conforming to IS7098) ISI marked in trenches/ducts/through GI pipes under roads of size 16 sqmm 4 core complete all as specified and directed. Note :- The earth work ,GI pipe shall measured and paid seperately under appropriate item of Sch A.

Supplying ,laying, commisioning,and testing of 1.1KV grade XLPE insulated PVC sheathed steel armoured aluminium stranded conductor LT UG cable ( conforming to IS7098) ISI marked in trenches/ducts/through GI pipes under roads of size 16 sqmm 2 core complete all as specified and directed. Note :- The earth work ,GI pipe shall measured and paid seperately under appropriate item of Sch A.

Supplying ,laying, commisioning,and testing of 1.1KV grade XLPE insulated PVC sheathed steel armoured aluminium stranded conductor LT UG cable ( conforming to IS7098) ISI marked in trenches/ducts/through GI pipes under roads of size 10 sqmm 2 core complete all as specified and directed. Note :- The earth work ,GI pipe shall measured and paid seperately under appropriate item of Sch A.

Supplying ,laying, commisioning,and testing of 1.1KV grade XLPE insulated PVC sheathed steel armoured aluminium stranded conductor LT UG cable ( conforming to IS7098) ISI marked in trenches/ducts/through GI pipes under roads of size 35 sqmm 3.5 core complete all as specified and directed. Note :- The earth work ,GI pipe shall measured and paid seperately under appropriate item of Sch A.

Supplying ,laying, commisioning,and testing of 1.1KV grade XLPE insulated PVC sheathed steel armoured aluminium stranded conductor LT UG cable ( conforming to IS7098) ISI marked in trenches/ducts/through GI pipes under roads of size 95 sqmm 3.5 core complete all as specified and directed. Note :- The earth work ,GI pipe shall measured and paid seperately under appropriate item of Sch A.

Supplying ,laying, commisioning,and testing of 1.1KV grade XLPE insulated PVC sheathed steel armoured aluminium stranded conductor LT UG cable ( conforming to IS7098) ISI marked in trenches/ducts/through GI pipes under roads of size 50 sqmm 3.5 core complete all as specified and directed. Note :- The earth work ,GI pipe shall measured and paid seperately under appropriate item of Sch A.

S&F aluminium cable 2 core 4 sqmm for srevice connection of security light complete all as specified and directed

S&F aluminium cable 2 core 2.5 sqmm for srevice connection of security light complete all as specified and directed

Excavation in trenches in any type of soil and not exc 1.5 m wide and n.exc 1.5 m in depth for laying of cable and fixing poles, stays etc and getting out complete all as specified and directed

Returning , filling in including spreading leveling, watering and well ramming in layers not exceeding 25 cm thick with excavated soil complete all as specified and directed.

Removing excavated material (surplus soil) to a distance not exceeding 50 mtrs and depositing where directed at a level not exc 1.5 m above the starting point all as specified and directed.

Sand cushioning to underground cable provided with a layer of 8 cm deep before laying the cable and 15cm deep after laying and stretching the cable including hand punning and consolidating complete. Note: for payment purpose punned thickness shall be measured.

M&L for well brunt bricks sub class 'B' in old size as cable protection laid flat width wise complete all as specified and directed.

Supply, laid in trenches or fixed on wall / ground with cement concrete pipe galvanised light grade with all fitting of size 40 mm dia complete all as specified and directed.

Supply, laid in trenches or fixed on wall / ground with cement conrete pipe galvanised light grade with all fitting of size 50 mm dia complete all as specified and directed.

Supply and Fixing LED post top ,energy saving ,environmetal frieddly ,iong life aesthetically designed with symmetrical light distribution ,complete with IP 65 protection all as specified and directed.

S& F in replacement Globe with 10W / 20 W LED bulb for parks garden ways and gate light complete with IP 65 protection all as specified and directed.

S& F in replacement LED Decorative post top ideal to lit up light 20 W for parks garden ways and gate light complete with IP 65 protection all as specified and directed.

Disconnecting of electric connection & taking down PVC/XLPE LT cable off sizes, fixing on wall with MS Clamps including make proper/ suitableon wall hole if require & reconnection complete all as specified and directed.

S&F only LED type street light fitting 90 watts made out of pressure dia aluminium hosing with heat resistant toughened glass and IP-66 protection complete all as specified and directed.

S&F only LED type street light fitting 120 watts made out of pressure dia aluminium hosing with heat resistant toughened glass and IP-66 protection complete all as specified and directed

S&F only LED type street light fitting 90 watts made out of pressure dia aluminium hosing with heat resistant toughened glass and IP-66 protection complete all as specified and directed.

S&F only LED type street light fitting 36 watts made out of pressure dia aluminium hosing with heat resistant toughened glass and IP-66 protection complete all as specified and directed

S&F only LED type street light fitting 60 watts made out of pressure dia aluminium hosing with heat resistant toughened glass and IP-66 protection complete all as specified and directed.

S&F only LED type street light fitting 20 watts made out of pressure dia aluminium hosing with heat resistant toughened glass and IP-66 protection complete all as specified and directed

S&F only LED type flood light fitting 60 watts made out of pressure dia aluminium hosing with heat resistant toughened glass and IP-66 protection complete all as specified and directed

S&F only LED type Flood light fitting 100 watts made out of pressure dia aluminium hosing with heat resistant toughened glass and IP-66 protection complete all as specified and directed

S& F in replacement of 250 A MCCB 4 pole, 415 volts 36 kA 50Hz with themal and magnetic release. with new ones complete all as specified and directed.

S& F in replacement of 160 A MCCB 4 pole, 415 volts 36 kA 50Hz with themal and magnetic release. with new ones complete all as specified and directed.

S& F in replacement of 100A MCCB 4 pole, 415 volts 36 kA 50Hz with themal and magnetic release. with new ones complete all as specified and directed.

S& F in replacement of 63 A MCCB 4 pole, 415 volts 36 kA 50Hz with themal and magnetic release. with new ones complete all as specified and directed.

M & L for painting of steel tublar pole 9 mtr long straight /tublar and mild steel work such as cross arm, clamp, nuts,bolts etc incl preparation of old painted surface and painting with black and yellow strip 30 cm long starting from black in alternate pattern up to 1.2 mtr height above couping and writting pole No with black paint having existing letter size complete all as specified and directed

S&F of junction box made from SMC/FRP sheet ready made of size 300 x 200 x 100 mm having 100A capacity for RYB and neutral with aluminium buster with 4 way connector fixed to pole/wall with MS clamp 25 x 5mm and nut bolts including following :- (a) MCB SP 6 Amp 10 KA 240 Volt with aluminium lugs -01 No

S&F of junction box made from SMC/FRP sheet ready made of size 200 x 200 x 100 mm having 100A capacity for RYB and neutral with aluminium buster with 4 way connector fixed to pole/wall with MS clamp 25 x 5mm and nut bolts including following :- (a) MCB SP 6 Amp 10 KA 240 Volt with aluminium lugs -01 No

S& F digital timer switch box made out of 3 mm thick CRCA sheet powder coated degree of protection IP 54suitable for 3 phase 415 V AC supply for street light feeder programmable 1 minute with backup of 6 years,28 memory location weekly programe with one changeover total 28 programe DIN type daily/weekly with 32 Amps rating contractor with controller MCB triple pole 40 Amps inside of appropriate size with locking arrangement complete including mounting/grouting on angle iron frame or fixed to LT pole with MS clamps 40X5mm FI nuts bolts and washers and painting with two coats of synthetic enamelled paintover one coat of red oxide Zink crome primer on clamps complete all as specified and directed.

Supply, transporting, errecting in truely vertical position , steel tubular swaged pole 9.0 Mtrs long , type 410-SP-31 complete with cast iron base plate, pole cap, finial taper plug, bolts, nuts washers and hooks for earthwire duly ISI marked as per IS :2713 including necessary earthwork and excavation PCC foundation in PCC 1:4:8 type D2 using 40mm graded stone aggregate and PCC 1:3:6 type C2 using 40mm stone aggregate as in plinth block,disposal of surplus soil to a distance not exceeding 50m painting two coats of Al paint over one coat of red oxide primer including 05 nos band/strips with different color (250mm wide each) synthetic enamel paint ( two coat over a coat of red oxide primer) at a distance 250mm from plinth block,marking poles number with black synthetic enamel paint including tarring one coat on steel surface embeded in concrete complete all as specified and directed. Note :- Earthtwork (excavation, returning filling, Removal of soil , PCC 1:4:8 and PCC 1:3:6 will be measured and paid seperately

M&L for replacement light grade GI bracket made out of 32 mm dia light grade pipe 1.2 mtr long bend to shape as directed fixed to steel tubular pole with two number MS clamp made out of 40x5 mm flat iron duly painted with two coats of synthetic enamelled paint over one coat of red oxide Zink crome primer with and including nuts, bolts etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggrigate) as in coping of poles above ground level including necessary form work, complete all as specified .

Material and labour for cement concrete 1:3:6 (40mm graded aggregate ) type C-2 for foundation of poles including necessary form work. All as specified and directed.

M&L for PCC/ road cutting for laying of pipe/cable exceeding 500 Sqcm & not exc 1000 sqcm in cross sectional area and making good with PCC 1:2:4 type B-1 using 20mm graded stone aggragate, complete all as specified and directed.

Supply and fixing LED wall light 5 watt complete all as specified and directed by Engr- in-charge.

Supply & Fixing Decorative and functional double arm pole with a length of 4 mtr.coated with grey shade.Pole is manufactured from G.I pipes and casting, Base plate is of M.S with thickeness of 10mm, Suitable for POST TOP LUMINAIRE,with Aesthetically designed Bell Pendant 45 Watt / 60 watt made up of spun aluminium housing,Clear Polycarbonate diffuser provided for pleasant light output. Grey epoxy powder coated finish for better Aesthetics.This traditional Bell pendant can be used in both contemporary and historical settings.Including all necessary earth work, cement concrete foundation,nut bolt, etc,for fixing of pole alongwith spke / nails for monkey menace including MCB for suitable size and all accessories required at site complete all as specified and directed at site.

Supply & Fixing Decorative and functional sigle arm pole with a length of 4 mtr.coated with grey shade.Pole is manufactured from G.I pipes and casting, Base plate is of M.S with thickeness of 10mm, Suitable for POST TOP LUMINAIRE 60 watt made up of spun aluminium housing,Clear Polycarbonate diffuser provided for pleasant light output. Grey epoxy powder coated finish for better Aesthetics. POST TOP LUMINAIRE 60 watt .Including all necessary earth work, cement concrete foundation,nut bolt, etc,for fixing of pole alongwith spke / nails for monkey menace including MCB for suitable size and all accessories required at site complete all as specified and directed at site.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.