Repair and maintenance of Angling hut at trout fish farm Hamni Distt. Kullu (H.P.)

Amount

Repair and maintenance of Angling hut at trout fish farm Hamni Distt. Kullu (H.P.)

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains , including dressing of sides and ramming of bottoms, lift upto all depth, including getting out the excavated soil and disposal of surplus excavated soils as directed, within all lead .including river training works and carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge .Any loss to the public and private property during the course of execution and disposal of unserviceable materials shall be absolute responsibility of the contractor which shall have to be duly compensated by the contractor to full extent in all respects in all cases as per direction of the Engineer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of form for all heights Edges of slabs and breaks in floors and walls Under 20 cm wide as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (one Cement : four coarse sand : eight graded stone aggregate 40 mm (forty millimetre) nominal size as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250x16 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 250x10 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Structural steel work riveted, bolted or welded in built up sections, trusses graiting, ladder and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Removing dry or oil bound distemper ,water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade two or more coats on over the wall surface to prepare the surface even and smooth complete.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over the wall surface to prepare the surface even and smooth complete.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture over the surface to prepare the surface even and smooth complete.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture over the surface to prepare the surface even and smooth complete.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing 8 mm thick PVC atstatic venyl lining on walls plain or coloured ,carbed or mosaic / metalled finishlaid with approved adhesive , fittings on wall and over the surface to prepare the surface even and smooth complete.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete size of tile 600x600 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all leads and lift For thickness of tiles above 25 mm and up to 40 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints , and preparing the plastering surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge With cement mortar 1:4 (one cement: four coarse sand) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc External work 15 mm dia nominal bore as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and placing on terrace(at all floor levels ) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 15 mm nominal bore as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc. 110MM Dia as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floors etc. complete. 110mmx90mm as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor,gully/Nahini trap as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing PVC door bend with oval access door insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. 110mm dia as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing PVC Collars ISI marked including fixing with approved adhesive etc. complete. 110mm dia as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing 8mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

vishal thakur govt contractor (BID ID -499260)

SONU KUMAR (BID ID -499121)