Construction of Anganwadi No.6 - ward 13 in Arpookara Grama Panchayath(MATERIAL SUPPLY)

Amount

Construction of Anganwadi No.6 Ward 13

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Carriage of Stone aggregate 40 mm nominal size and above

Carriage of Stone aggregate below 40 mm nominal size

Coarse sand (zone III)

Carriage of Coarse sand

Portland Cement

Carriage of Cement

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Sundries

Stone for masonry work

Carriage of Soling stone & masonry stone

Solid blocks of size 30x20x15cm

Cement

Coarse sand

Structural steel such as tees, angles, channels and R.S. joists

Steel

Red oxide Zinc chromate primer

Carriage

Adjustable span ESO+SI (2.35-3.40)

Adjustable telescopic prop 3 m (2.02-3.75m)

Stone Aggregate(single size): 10 mm nominal size

Twisted steel/deformed bars

Carriage of Steel

Fine sand (zone IV)

Fine sand (1 part badarpur sand : 2 parts jamuna sand

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Carriage and sundries

Vitrified floor tile 50x50 cm

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Pink primer (for wood)

Synthetic enamel paint in black or chocolate shade

Plastic emulsion paint

Epoxy paint

Vitreous China orrisa type w.c. pan size 580 mm

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

100 mm S.C.I. trap with vent heel

Vitreous China flat back wash basin 630x450 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Rectangular shape 453x357 mm Mirror with Plastic moulded frame

Hard board 6 mm thick

Rawl plug 50 mm (designation 10 nos)

Chromium plated Brass screws 25 mm

Brass full way valve with C.I. wheel (screwed end) 25 mm dia

Polyethylene water storage tank with cover and suitable locking arrangemnet

Brass bib-cock-15 mm dia

C.P. Brass angle valve 15 mm

PTMT - Soap Dish/Holder 138x102x75 mm

PVC pipe 25 mm outer dia. 10kgf cm2

PVC pipe 110 mm outer dia. 4kgf/cm2

PVC pipe 75 mm outer dia 4 kgf/cm2

PVC vent cowl 75 mm dia

PVC Elbow 110 mm dia

PVC bend 110 mm dia

PVC Tee 110x110x110mm dia

PVC bend 75 mm dia

PVC Reducer 110x75 mm dia

PVC Tee 75x75x75 mm dia

PVC Elbow 75 mm dia

BIJU PETER