SITC of New LED light fittings and associated Electrical Works at Vadodara Airport

SH-I, Supply of LED fittings & Fans Supply of 2’x2’ recessed mounted backlit LED troffer luminaire with system wattage ≥ 36W and system lumen efficacy ≥140 lm/W.The luminaire shall be constructed from CRCA sheet steel housing with high-quality white powder-coated finish, complete with high transmittivity opal white diffuser to ensure low glare and uniform light distribution. The fixture shall be sleek in design with a minimum depth of 35 mm.The luminaire shall have CRI ≥80, SDCM ≤5, and CCT of 5700 - 6500K. The rated life shall be L70 ≥50,000 hours.Electrical parameters shall include power factor ≥0.95, THD ≤10%, suitable for an operating voltage range of 140–270 VAC, 50 Hz, with inbuilt surge protection of minimum 4 kV.The LED driver shall be EMI/EMC compliant, isolated type, with efficiency ≥85%, and shall include protections against short circuit, open circuit, along with P2P protection up to 440V for minimum 4 hours, and low/high voltage cutoff with auto recovery feature.The fixture shall operate within a temperature range of -10°C to +45°C and shall comply with Electrical Class I protection, IP40 ingress protection, and IK03 impact rating.The thermal management shall be ensured through an efficient aluminium heat sink design, maintaining LED junction temperature below 90°C.The maximum power consumption shall not exceed the specified rating. The luminaire and driver shall be BIS compliant, and valid certificates shall be submitted. LM-79, LM-80, and TTR reports from NABL accredited laboratories shall also be provided.The luminaire and lighting performance shall comply with relevant provisions of IS 10322.The manufacturer’s name/logo shall be engraved/ embossed/ screen-printed on the luminaire housing.The luminaire shall be supplied with a minimum 5-year comprehensive warranty provided by OEM

Supply of 1’x4’ recessed mounted backlit LED troffer luminaire with system wattage ≥ 36W and system lumen efficacy ≥120 lm/W.The luminaire shall be constructed from CRCA sheet steel housing with high-quality white powder-coated finish, complete with high transmittivity opal white diffuser to ensure low glare and uniform light distribution. The fixture shall be sleek in design with a minimum depth of 35 mm.The luminaire shall have CRI ≥80, SDCM ≤5, and CCT of 5700 - 6500K. The rated life shall be L70 ≥50,000 hours.Electrical parameters shall include power factor ≥0.95, THD ≤10%, suitable for an operating voltage range of 140–270 VAC, 50 Hz, with inbuilt surge protection of minimum 4 kV.The LED driver shall be EMI/EMC compliant, isolated type, with efficiency ≥85%, and shall include protections against short circuit, open circuit, along with P2P protection up to 440V for minimum 4 hours, and low/high voltage cutoff with auto recovery feature.The fixture shall operate within a temperature range of -10°C to +45°C and shall comply with Electrical Class I protection, IP20 ingress protection, and IK03 impact rating.The thermal management shall be ensured through an efficient aluminium heat sink design, maintaining LED junction temperature below 90°C.The maximum power consumption shall not exceed the specified rating. The luminaire and driver shall be BIS compliant, and valid certificates shall be submitted. LM-79, LM-80, and TTR reports from NABL accredited laboratories shall also be provided.The luminaire and lighting performance shall comply with relevant provisions of IS 10322.The manufacturer’s name/logo shall be engraved/ embossed/ screen-printed on the luminaire housing.The luminaire shall be supplied with a minimum 5-year comprehensive OEM warranty.

Supply of LED surface mounted batten luminaire with system wattage ≥ 20W. Fixture to be made of extruded aluminium housing with high transmittivity PMMA/PC inset diffuser for low glare and uniform light distribution. System luminous efficacy ≥120 lm/W, CRI ≥80, SDCM ≤5, and CCT of 5700 - 6500K. The rated life shall be L70 ≥50,000 hours.Electrical parameters shall include power factor ≥0.95, THD ≤10%, suitable for an operating voltage range of 140–270 VAC, 50 Hz, with inbuilt surge protection of minimum 4 kV.The LED driver shall have efficiency ≥85% and shall include short circuit and open circuit protection.The fixture shall operate within a temperature range of -10°C to +45°C and shall comply with Electrical Class I protection, IP20 ingress protection, and IK04 impact rating.The thermal management shall be ensured through an efficient aluminium heat sink design, maintaining LED junction temperature below 90°C.The maximum power consumption shall not exceed the specified rating. The luminaire and driver shall be BIS compliant, and valid certificates shall be submitted. LM-79, LM-80, and TTR reports from NABL accredited laboratories shall also be provided.The luminaire and lighting performance shall comply with relevant provisions of IS 10322. The manufacturer’s name/logo shall be engraved/ embossed/ screen-printed on the luminaire housing.The luminaire shall be supplied with a minimum 5-year comprehensive warranty provided by OEM.

Supply of LED surface mounted batten luminaire with system wattage not exceeding 40W. Fixture to be made of extruded aluminium housing with high transmittivity PMMA/PC inset diffuser for low glare and uniform light distribution.The luminaire shall have minimum system lumen output of 4800 lumens with system luminous efficacy ≥120 lm/W, CRI ≥80, SDCM ≤5, and CCT of 5700 - 6500K. The rated life shall be L70 ≥50,000 hours.Electrical parameters shall include power factor ≥0.95, THD ≤10%, suitable for an operating voltage range of 140–270 VAC, 50 Hz, with inbuilt surge protection of minimum 4 kV.The LED driver shall have efficiency ≥85% and shall include short circuit and open circuit protection.The fixture shall operate within a temperature range of -10°C to +45°C and shall comply with Electrical Class I protection, IP20 ingress protection, and IK04 impact rating.The thermal management shall be ensured through an efficient aluminium heat sink design, maintaining LED junction temperature below 90°C.The maximum power consumption shall not exceed the specified rating. The luminaire and driver shall be BIS compliant, and valid certificates shall be submitted. LM-79, LM-80, and TTR reports from NABL accredited laboratories shall also be provided.The luminaire and lighting performance shall comply with relevant provisions of IS 10322.The manufacturer’s name/logo shall be engraved/ embossed/ screen-printed on the luminaire housing.The luminaire shall be supplied with a minimum 5-year comprehensive warranty provided by OEM.

Supply of non-flammable LED weatherproof batten luminaire suitable for CISF Armoury application with system wattage ≥36W and system luminous efficacy ≥135 lm/W. Luminaire shall be provided with flame-retardant and self-extinguishing housing and diffuser conforming to UL94 V-0 or equivalent standard, CRI ≥80, SDCM ≤5, CCT 6500K, rated life L70 ≥50,000 burning hours, PF ≥0.95, THD <10%, driver efficiency ≥85%, operating voltage 120–300V AC and surge protection minimum DM-4kV and CM-3kV. The luminaire shall be IP66 and IK10 rated and suitable for industrial indoor applications. Luminaire and driver shall be BIS compliant and valid LM-79, LM-80 and NABL accredited test reports shall be submitted. The luminaire shall comply with IS 10322 and The manufacturer’s name/logo shall be engraved/ embossed/ screen-printed on the luminaire housing.The luminaire shall be supplied with a minimum 5-year comprehensive warranty provided by OEM.

Supply of terminal building canopy edge light , Wattage ≥ 90W, luminous efficacy >125 lm/W, operating voltage 120–300V, rated voltage 220–240V, frequency 50 Hz, with surge arrestor more than or equal 4 kV inbuilt in driver and 10 kV external inside housing, driver efficiency >85%, CCT 5700 - 6500°K ,THD <10% as per IEC 61000‑3‑2, PF ≥0.95, IP‑66, IK‑08, CRI >70,SDCM ≤5, rated life L70 ≥50,000 burning hours, under/over‑voltage protection, short‑circuit and open‑circuit protection, EMI‑EMC compliance as per CISPR‑15,suitable for outdoor canopy edge illumination, complete with constant‑current driver and The manufacturer’s name/logo shall be engraved/ embossed/ screen-printed on the luminaire housing.Luminaire and driver shall be BIS compliant and valid certificates shall be submitted. Valid LM-79, LM-80 and NABL accredited Test & Type Test Reports (TTR) for the offered model shall be furnished. The luminaire shall comply with relevant provisions of IS 10322.The luminaire shall be supplied with a minimum 5-year comprehensive warranty provided by OEM.

Supply of round surface mounted backlit LED downlighter with system wattage not exceeding 18W and minimum system lumen output of 2250 lumens, ensuring system luminous efficacy ≥125 lm/W.The luminaire shall be constructed from pressure die cast aluminium housing in glossy white powder coated finish, complete with high transmittivity PMMA/PC inset diffuser (deep recess type) to ensure low glare and uniform light distribution. The fixture shall be sleek in design with a maximum depth not exceeding 40 mm.The luminaire shall have CRI ≥80, SDCM ≤5, and CCT of 5700 - 6500K. The rated life shall be L70 ≥50,000 hours.Electrical parameters shall include power factor ≥0.95, THD ≤10%, suitable for an operating voltage range of 140–270 VAC, with inbuilt surge protection of minimum 4 kV.The LED driver shall have efficiency ≥85% and shall include short circuit and open circuit protection, along with P2P protection up to 440V for minimum 4 hours, and low/high voltage cutoff with auto recovery feature.The fixture shall operate within a temperature range of -10°C to +45°C and shall comply with Electrical Class I protection, IP20 ingress protection, and IK03 impact resistance.The thermal management shall be ensured through an efficient aluminium heat sink design, maintaining LED junction temperature below 90°C.The maximum power consumption shall not exceed the specified rating. The luminaire and driver shall be BIS compliant, and valid certificates shall be submitted. LM-79, LM-80, and TTR reports from NABL accredited laboratories shall also be provided.The luminaire and lighting performance shall comply with relevant provisions of IS 10322.The manufacturer’s name/logo shall be engraved/embossed/screen-printed on the luminaire housing.The luminaire shall be supplied with a minimum 5-year comprehensive warranty provided by OEM.

Supply of round recessed mounted backlit LED downlighter having system wattage not exceeding 24W and minimum system lumen output of 3000 lumens, ensuring system luminous efficacy ≥125 lm/W.The luminaire shall be constructed from pressure die cast aluminium housing in glossy white powder coating finish, complete with high transmittivity PMMA/PC inset diffuser (deep recess type) to ensure low glare and uniform light distribution. The fixture shall be sleek in design with a maximum depth not exceeding 40 mm.The luminaire shall have CRI ≥80, SDCM ≤5, and CCT of 5700 - 6500K. The rated life shall be L70 ≥50,000 hours.Electrical parameters shall include power factor ≥0.95, THD ≤10%, suitable for an operating voltage range of 140–270 VAC, with inbuilt surge protection of minimum 4 kV.The LED driver shall have efficiency ≥85% and shall include short circuit and open circuit protection, along with P2P protection up to 440V for minimum 4 hours, and low/high voltage cutoff with auto recovery feature.The fixture shall operate within a temperature range of -10°C to +45°C and shall comply with Electrical Class I protection, IP20 ingress protection, and IK03 impact resistance.The thermal management shall be ensured through an efficient aluminium heat sink design, maintaining LED junction temperature below 90°C. The maximum power consumption shall not exceed the specified rating. The luminaire and driver shall be BIS compliant, and valid certificates shall be submitted. LM-79, LM-80, and TTR reports from NABL accredited laboratories shall also be provided.The luminaire and lighting performance shall comply with relevant provisions of IS 10322.The manufacturer’s name/logo shall be engraved/embossed/screen-printed on the luminaire housing.The luminaire shall be supplied with a minimum 5-year comprehensive warranty provided by OEM.

Supplying of Street light LED fixture, Wattage ≥ 70W, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-08, CRI >80 , under voltage and over voltage protection,EMIEMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 5700 - 6500 °K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required. System lumen efficacy >125 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size i/c beam shall angle be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).The manufacturer’s name/logo shall be engraved/embossed/screen-printed on the luminaire housing.The luminaire shall be supplied with a minimum 5-year comprehensive warranty provided by OEM.

Supplying of Flood Canopy Light (560 x 360mm), Wattage ≥ 70W, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50 hz, Operating temp range -10 deg to 45 deg centigrade, internal surge protection of 4 KV L,N,E as per IEC 61000-4-5,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-08, CRI >70 , under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg- 120deg as per the application and the project requirement deg., suitable tilt able fitting, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 5700 - 6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required . System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size i/c beam angle shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).The manufacturer’s name/logo shall be engraved/embossed/screen-printed on the luminaire housing.The luminaire shall be supplied with a minimum 5-year comprehensive warranty provided by OEM.