Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.7 LAccepted-AOC POST MISAMARI DIST SONITPUR ASSAM 784 506 | SONITPUR | ASSAM | 784506 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹41.9 L+₹1.2 L (3.02%)Rejected-Finance 1 SADHANA SOCIETY DEV BAUG DEVBAUG BHAVNAGAR GUJARAT 364001 | BHAVNAGAR | GUJARAT | 364001 | L2 | Rejected-Finance NOT BEING LOWEST BID. | |
| 3 | L3₹42.0 L+₹1.3 L (3.08%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST BID. | |
| 4 | L4₹43.6 L+₹2.9 L (7.19%)Rejected-Finance NOT AVAILABLE | L4 | Rejected-Finance NOT BEING LOWEST BID. |
Tender Value
₹4.8 Cr
EMD Value
₹95,000
Closing Date
20 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MISAMARI
PO-Missamari Dist-Sonitpur Assam
PROVN OF CERTAIN REVENUE AND MINOR WORKS AT VARIOUS UNITS UNDER GE MISAMARI
2022_MES_557729_2
8309
Open Tender
Civil Works
Item Rate
270 days
GE MISAMARI
PLEASE REFER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
Yes
GE MISAMARI
₹95,000
Yes
16 May 2023
29 Nov 2022
22 Dec 2022
29 Nov 2022
20 Dec 2022
6 Dec 2022
Amount
Surface dressing not exceeding 15cm deep in soft/loose soil, complete all as specified as directed.
Surface excavation n. exc 30 cm deep and averaging 15 cm deep and and getting out in soft/loose soil, complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 metre wide for foundation etc or for shafts, wells cesspits, manholes etc not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft / loose soil complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soil, complete all as specified and directed.
M&L Cement concrete (1:4:8) type D2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M&L Cement concrete (1:3:6) type C2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M&L for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection , finishing cement concrete surfaces even & smooth without using extra cement.complete all as specified and directed.
M&L for 100 mm thick PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in sub base, complete all as specified and as directed.
M&L for 100 mm thick PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in paving, hardstanding, footpath, complete all as specified and as directed.
M&L for 100 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base, complete all as specified and as directed.
M&L for 75 mm thick PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in floor with spike rolling to surface or making impressions of expanded metal, whilst the concrete is green, complete all as specified and as directed.
M&L for Reinforced Cement Concrete M-25 ( using 20mm graded stone aggregate) in Foundations including Rafts, Footings, Foundation Beams; Plinth Beams; bases for Columns, etc.; Basement Slabs, Under-reamed Piles and Mass Concrete, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.
M&L for Reinforced Cement Concrete M-25 ( using 20mm graded stone aggregate) in columns, pillars, piers, post and strut, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.
M&L for Reinforced Cement Concrete M-25 ( using 20mm graded stone aggregate) as in beams, cantilevers, Chajjas colomns, bressummers, lintels over 1.50 Metre span, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.
M&L for Reinforced Cement Concrete (Nominal Mix) 1:2:4 type B1 ( using 20mm graded aggregate) in slab supported on wall, beams, roof beam, etc, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.
M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.
M&L for TMT Bars 5mm dia and over upto and including 10mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.
Use and waste Form work for foundation footing , bases of columns &plinth beams similar work vertical or batter, complete all as specified and as directed.
Use and waste Form work for side of pillars, posts, columns & similar works vertical or batter, complete all as specified and as directed.
Use and waste Form work to side & soffits of floor or roof beams lintels & similar works, complete all as specified and as directed.
M&L Pre-cast Reinforced Cement Concrete (1:2:4) type B1 ( using 20mm graded aggregate) providing, in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts,boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar 1:4 complete with joints to match complete all as specified and directed.
M&L for burnt brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.
M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m radius in half brick wall built in CM 1:4, complete all as specified and directed.
M&L for Damp proof course of 40 mm thick to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) mixed with WPC, complete all as specified and directed. Note : WPC shall be measured & paid separately.
M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth.
M&L rendering 15mm thick on fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth, complete all as specified and directed.
M&L for 20mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement, complete all as specified and directed. Note : Water Proofing Compound shall be measured and paid separately under relevant item.
Supply only integral Water Proofing Compound
M&L for sand filling under floors spread, levelled, watered and well rammed in layers n.exc 25 cm thick, complete all as specified and as directed.
M&L for broken stone or boulders of hardcore of gauge n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surfac,complete all as specified and as directed.
M&L for Pre-polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20mm thick screed bed in CM 1:6, complete all as specified and as directed.
M&L for Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.
M&L for glazed ceramic coloured tiles, glossy finished of size 450x350x7mm thick as in vertical surfaces such as skirting/dados and riser of stems., over and including including 10 mm thick rendering/backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles, complete all as specified and as directed.
M&L for Glazed ceramic tiles in floors 200x 200x 7 mm thick over and including 15 mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.
S&F Factory made Solid PVC Door Frame of size 50x47 mm made out of 5.0 mm thick wood grain printed PVC sheet reinforced with Mild Steel Square Tube and edges will be painted to match with printed sheet and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.
S&F Factory made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Square Tube for Top and Bottom Rails, mild steel Frame shall be covered with heat moulded plain colour PVC 'C' Channel having PVC Sheet Strip 20 mm wide stuck inside with Solvent Cement for Styles and plain colour PVC Sheet for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail, Bottom Rail Panelling of plain colour PVC Sheet to be fitted in mild steel Frame welded/sealed to the Styles and Rails with suitable Sheet Beading and jointed together with Solvent Cement and fixing in the Frame at Site as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.
S&F Solid pvc Door Frame of size 100mmx45 mm made out of 5mm wood grain colour PVC Sheet reinforced with MS Square etc, complete all as specified and as directed.
Supplying and fixing in frame at site, factory made solid panel pvc moulded door shutter 28 to 30 mm thick (style) with 2,4,or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed.
S&F for PVC ventilators frame work with multiple chamber hollow PVC section comprising of DWUF 405(40x46mm)(3 mm pin headed glass using extruded PVC section having dia of 0.9x14.5mm EDPM gasket, complete all as specified and directed.
S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheetng 0.50mm thick of an colour having tensile strengthof 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S & F of pre-painted colour galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.
S&F for roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam tee, angle, channel or flat sections) including clits etc confoRming to Fe-410-0 or Fe-310-0, complete all as specified and as directed.
S&F for rolled mild steel Fe-410-W (Gde E-250 quality A) for framed work as in doors or gates of angle or other section with gusset plates, rail, braces etc complete, drilled for fixing of steel sheeting or other covering, Doors etc to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings also fastening & fixing, complete all as specified and as directed.
M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and as directed.
S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender, complete all as specified and directed.
M&L for 4m thick Non Asbestos designed Cement E board incl two coats of distempering in one side as approved by GE of size fixed in ceiling, complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.
S&F aluminium alloy 200mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed, complete all as specified and directed.
S&F 100mm MS butt hinges medium weight, complete all as specified and directed.
S&F for 150mm aluminium anodised handle cast type, complete all as specified and directed.
S&F 15 mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor, complete all as specified and directed.
S&F 20 mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor, complete all as specified and directed.
S&F 25mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor, complete all as specified and directed.
S&F 25 mm Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed, complete all as specified and directed.
S&F 15mm bore angular stop cock with flange screwed down high pressure with crutch or butter fly handdle screwed both end for iron pipe complete .Make :Code-CON -059KN of Jaquar.
S&F for 15mm bore bib cock with wall flange copper alloy screwed down high pressure with crutch or butter fly handdle screwed both end for iron pipe, complete all as specified and directed. Make : Code No. CON-041KN of Jaquar
S&F PVC connection pipe 600mm long with brass coupling in both ends screwed down for iron pipe, complete all as specified and directed.
S&F of viterious china wash down water couple closet size 760x635x300 mm tap distance S-220 mm.incl cistern and seat cover, complete all as specified and directed. Make : Code No. FNS-WHT-0921BS of Jaquar
S&F for 15 mm bore Pillar Tap fancy Type chromium plated, screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed. Make : Code No. OPP-1500PM of Jaquar.
S&F for cromimum plated helth faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long Easy Flex tube in chrome finish, complete all as specified and directed. Make : Code No. ALD-573 of Jaquar.
S&F chromium plated tubular towel rail,15 mm dia D type 60 cm long between flanges, complete all as specified and directed. Make : Code No. AKP-35711P of Jaquar.
S&F CP towel ring squre, complete all as specified and directed. Make : Code No. CAN-1121N of Jaquar.
S&F soap dish holder fixed to plugs with chromium plated brass screws, complete all as specified and directed. Make : code-ACN-1131N of Jaquar.
S&F for Corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard & railing 45 cm long, complete all as specified and directed. Make : Code No. ACN-1173 of Jaquar.
S&F CP toilet paper roll holder with flap incl all necessary fittings, complete all as specified and directed. Make : Code-ACN-1151N of Jaquar.
S&F vitreous china wash basin white, table top size 510x350x115mm excluding taps , waste ,but including barkets, complete all as specified and directed. Make : Cat No FLS-WHT-0575 of Jaquar.
S&F 32 mm bore CP waste coupling ( half or full threaded), complete all as specified and directed. Make : Code-ALD-705 of Jaquar.
S&F for Urinal with size of Urinal 630x375x315 mm fixed in position, complete all as specified and directed. Make : Code URS-WHT-0702N of Jaquar.
S&F for urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (miniumum weight 60 gms), complete all as specified and directed.
S&F for 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle/push flush type brackets etc complete all as specified and as directed.
S&F for vitreous china squatting Orissa pattern Water closet, size 630x450 mm white, with 'P' or 'S' Trap, integral foot rests etc. complete including making good to floor, complete all as specified and as directed.
S&F for 15mm bore piller tap fancy type castcopper alloy with capstin head CP screwed down high pressure with or without littered 'H' or 'C' with long screwed shank and fly nuts screwed for iron pipe etc, complete all as specified and as directed.
S&F for Vitreous china wash hand basin, white, (flat back or angle back) of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, complete all as specified and as directed.
S&F 32mm bore dia Waste coupling of PTMT (half or full threaded) minimum weight 45 gms, complete all as specified and as directed.
S&F for Vitreous china urinals, bowl typeflat back size 465 x 355x 265 mm white minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, complete all as specified and as directed.
S&F 100mm dia PTMT grating, complete all as specified and as directed.
S&F 75 mm thick PVC (SWR pipes single socketed in any length with rubber ring joints laid in trenches or floors, complete all as specified and as directed.
M&L 100 mm bore for cast iron Nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls, complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) Vent Cowl, complete all as specified and as directed.
M&L for Granite of any type 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 20 mm thick screed bed 1:6 CM in floors, complete all as specified and as directed.
M&L for Hoisting & fixing 500 litres Rotational moulded polythylene water stroage tanks (cylindrical vertical with closed top) hoisted & fixed in position all position all as specified in SSR part -I incl all necessary fittings, complete all as specified and as directed.
S&F for 20 mm dia ball valves, PTMT high pressure of epoxy coated Aluminium rod and high density plastic ball (200 gms) complete, screwed for iron pipes or brasas ferrule and fixed, complete all as specified and as directed.
Supplying, laying and testing of 150 mm internal dia of double wall corrugaed (DWC) high density polythylene pipe (HDPE) and stiffness classes 8 (SN-8) with ISI marked (With CML No ) with and including all fittings & jointing materials for connection of inspection chamber/WC to first manhole of the sewage line, complete all as specified and directed.
Cutting into existing manholes of 150 mm dia for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, complete all as specified and as directed.
M&L for preparation of new plastered surface and applying three coat of white wash on wall, complete all as specified and as directed.
M&L for preparation of new plastered surface and applying two coats of cement base paint over a coat of primer on wall , complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
M&L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including Concealed Rigid PVC Conduit, medium grade, ISI marked of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22 mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLSH) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.
All as per item No 92 here in before but for one Ceiling fan / Exhaust Fan point controlled by one, one way switch and regulator, complete all as specified and directed.
All as per item No 92 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant Low smoke (FRLSH) PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly, complete all as specified and directed.
M&L for Point wiring with 1.5 Sq mm copper conductor single core FRLSH PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC Concealed conduit and its accessories of suitable size, high grade ISI marked in walls /roof and PVC boxes of suitable size including fixing/grouting sunken/ surface as per site requirement for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLSH PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for One light point controlled by one, one way switch 5 Amps, complete all as specified and directed.
All as per item No 95 here in before but One ceiling fan / exhaust fan point controlled by one , one way switch and regulator, complete all as specified and directed.
All as per item No 95 here in before but One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board, complete all as specified and directed.
All as per item No 95 above but with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board, complete all as specified and directed.
S&F Modular Switch (White) single pole, one way 6 amps, 230 volts, 1 module, complete all as specified and directed.
S&F Modular Switch (White) single pole , one way 16 amps,, 1 module 230 volts, complete all as specified and directed.
S&F Socket,(White) 6A - 2/3 pin combined 2 module, 230 volts, complete all as specified and directed.
S&F Socket (White) 6A/16A - 2/3 pin combined 2 module, 230 volts, complete all as specified and directed.
S&F Modular Base plate (White) 3 Module, complete all as specified and as directed.
S&F Modular Base plate (White) 8 Module, complete all as specified and as directed.
S&F GI Modular Box 3 Module, complete all as specified and as directed.
S&F GI Modular Box 8 Module, complete all as specified and as directed.
S&F Recess mounted Environmental friendly ,asthetically designed ,high performance, round shape back lit downlighter 12W in ABS housing PC Opal with high brightness SMD LED as Light source,suitable for Armstrong /Grid ceiling , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including suitable LED Driver, complete all as specified and directed. Make : Model No. GLOW (GLOWDLR12WLED830S) of HAVELLS or equivalent in CROMPTON/Surya.
S&F Decorative mirror light luminaire made out of metal/synthetic ,colour warm white,with 7W LED having Driver and frame, complete as per sample incl removal of old unsv fitting, complete all as specified and directed.
S&F sheet metal enclosure MCB DB SPN 8 way IP 54 Protection also with cement spill protector 200 Amps rated bus bar 240 volts double door with magnitic locking system, complete all as specified and directed. Make : Model 811825 of Indo Asian or equivalent in Legrand/ L&T.
S&F MCB Double Pole 25 Amps 240/415 Volt, confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed. Make : Indo Asian/L&T/ Legrand.
S&F switch piano single pole flush type 5 amps, 230 volts, complete all as specified and directed.
S&F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm, complete all as specified and directed.
S&F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/squareblocks, complete all as specified and directed.
S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified and directed. Make : Cat No: LHLDEUEBML8Z010of Havells or equivalent in CG/Polycab.
S & F Switch socket combination flush type multipurpose 2/3 pin 5 Amps two in one , 230 volts, complete all as specified and directed.
S&F sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unsv sheet metal enclosure complete all as specified and directed. Make : Model No. DBTPE004DD of L&T or equivalent in Schneider/Indo asian/Legrand
S&F MCB TPN 415 volts suitable for fixing in MCB DB of capacity 63 amps, complete all as specified and directed. Make : Model No. BB40630C of L&T or equivalent in Schneider/Indo asian/Legrand
S&F pre-wired double door MCB DB made out of 18 SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar , 4 way double door openable,complete all as specified and directed.
S&F MCB Double Pole 20 Amps 240/415 Volt, confirms to IS/IEC 60898 Braeking Capacity of 10 kA, C-curve, complete all as specified and directed. Make :Cat No: BB20320B of L&T or equivalent in Schinder/ Legrand.
S&F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Braeking Capacity of 10 kA, C-curve, complete all as specified and directed. Make : Model No. BB10060B of L&T oe equivalent in Schinder/ Legrand.
S&F wall mounted LED 18 watts, 4 feet, of colour temperature 2700 K (warm white), Batten slim type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements and connection from ceiling rose to fitting, complete all as specified and as directed.
S&F wall mounted LED 18 watts ,Batten type T 8 light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including Ultra bright LED polycarbonate (T8) tube (Single side connection) 4' x 18 watts with G13 lamp holder complete all as specified and directed. Make : Model No. REGALBATTENT8UPTO1X18WDSBSWH For Batten Fitting and Model No. PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight of Havells, or equivalent in CG/Polycab.
S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape, complete all as specified and directed. Make : Model No. ENDURAPEARLSL25WLED757SASYTOPCMP of Havells or equivalent in CG/Polycab.
Supply & Laying LT UG XLPE cable of size 2 core x 10 sq mm laid in trenches/ floors/ on wall/ service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal/ cable gland as per site requirement including connecting to the main switches/ cut outs MCB/ MCCB with necessary lugs after cutting to required length of cable, complete all as specified and directed.
Supply & Laying LT UG XLPE cable of size 4 core x 16 sq mm laid in trenches/ floors/ on wall/ service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal/ cable gland as per site requirement including connecting to the main switches/ cut outs MCB/ MCCB with necessary lugs after cutting to required length of cable, complete all as specified and directed.
Supply and laying well burnt Bricks , locally available best quality (sub class "B" bricks) laid in trenches perpandicular to U/G cable for cable protection , complete all as specified and directed.
Supply , spread and filling approved sand in cable trenches for cushioning of LT UG cable , complete all as specified and directed. NOTE : Punned thickness only will be measured and paid.
S&F heavy duty exhaust fan 300 mm sweep MS Body, 3 wing 1400 rpm, single phase 240volts copper wounds complete with all accessories as louvers shutters etc incl making connection through 3 core PVC copper wire run through flexible pipe. Single phase type, complete all as specified and directed. Make : Orient/Equivalent /USHA/ Havells.
S&F polycabonate blade exhaust fan 250 mm sweep 5 blade,50W, 1300 RPM single phase complete with all accessories incl making connection through 3 core PVC copper wire run through flexible pipe. Single phase type, complete all as specified and directed. Make : Model No. BRISK AIR NEO of Crompton or equivalent in USHA/Havells.
S&Ffor vertical water heater geyser storage type, suitable for working on single phase 240 Volt AC supply Cap 25 Ltr, 5 star, 2KW complete with connection pipes (2 Nos) and Steel Nuts and Bolt ( 2 Nos), complete all as specified and directed. Make : Jaquar/Havells/USHA
Supply & lay for GI tubing, 40 mm dia bore, light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc, complete all as specified and directed .
Supply & lay for GI tubing, 50 mm dia bore, light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc, complete all as specified and directed .
M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc,and CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion. NOTES : The unit rate includes for protection pipe and GI strip dia from top of earth plate up to 5.00 metre above ground level.
S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 50 mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and directed.
S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 32mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and directed.
S&F PP-R Gate Valves (Brass Insert) 32mm Outer dia and fixed including taking down of existing unserviceable One, complete all specified and directed.
S&F PP-R Gate Valves (Brass Insert) 50 mm Outer dia and fixed including taking down of existing unserviceable One, complete all specified and directed.
Cutting of existing CI/DI pipe laid 80 mm dia for inserting Tees for new connection of 80 mm x 63 mm dia, complete all as specified and directed.
M&L for connection pieces for inserting 50 mm PPR pipe into 80 mm distribution mains, complete all as specified and directed.
M&L for connection pieces for inserting 63 mm PPR pipe into 80 mm distribution mains, complete all as specified and directed.
Making connection of PP-R distribution branch with PP-R main of 63 mm size by providing and fixing tee of 50 mm x 32 mm including cutting and making fusion joint etc,complete all as specified and directed.
M/S Krishna Construction Co.
MS Awash Ghosh and Brothers
MOHAMMAD NABI HUSSAIN
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .