STBR/SOPD-G/Tezpur-02/02 Improvement/ Construction of (1) Tiger Hill Link Road (Hari Har Dham Path) (Length 320.00m) (2) Ketengatika Road (Length 650.00m)(3)Sukleswar Nagar Road and Bye Lane 1, 2, 3 and 6 under Mukhya Mantrir Nagariya Pakipath Nir

1) Construction of Tiger Hill Link Road (Hari Har Dham Path) Clearing and grubbing road land including uprooting wild vegetation, grass,bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. (i) By Manual Means (a) In area of non thorny jungle

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site,spreading,grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1 (I) Private Land

Granular Sub Base with well Graded material. Table :- 400.1) :- Construction of Granular Sub Base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (ii) Grading II material.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreadingin uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber,applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading-3 asper Technical Specification Clause 405. (A) By Manual Means (Grade-III)

Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per technical specification clause 1504 complete including carriage.. a)Including Edge block/ Edge restraints

Providing and fixing of semi reflective cautionery, mandatory and informatory sign board as per IRC made of 1.5mm thock MS sheet duly stove white colour in front and gray colour on back with red reflective border of 65mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for rRural Roads of required shade and colour supported and welded on 47mmx47mm x 12 SWG sheet tube firmly fixed to the ground by mean of propereltty designed foundation with M-15 grade cement concrete 450x450x600mm, 600 mm below ground level as per approved drawing Cluse 1701.2.2 600mm equilateral Triangle

Providing and fixing of semi reflective cautionery, mandatory and informatory sign board as per IRC made of 1.5mm thock MS sheet duly stove white colour in front and gray colour on back with red reflective border of 65mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for rRural Roads of required shade and colour supported and welded on 47mmx47mm x 12 SWG sheet tube firmly fixed to the ground by mean of propereltty designed foundation with M-15 grade cement concrete 450x450x600mm, 600 mm below ground level as per approved drawing Cluse 1701.2.2 800mm x 600mm rectangular

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Painting two coats including prime coat with epoxy paint of approved brand on concrete/ steel surfaces after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701

Excavation for Structures (Earth workin excavation of foundation of structures as per drawing and technical specification, including settingout, construction of shoring and bracing, removal of stumps and other deleterious matter,dressing of sides and bottom and back filling with approved material.