Construction of Children and adolescent Libraries at Govt. Senior Secondary School Kala Amb(1st Floor), Block Surla, Distt. Sirmour (HP).

Amount

Providing and laying cement concrete 1:8:16 (1 cement: 8 sand: 16 graded stone aggregate 20 mm nominal size) and curring complete on slab and floor excluding the cost of form work. Screed laid under floor.

Centering and shuttering including strutting, propping etc. and removal of form work for : (A) Lintels, beams, plinth beams, girders, bressumers and cantilevers including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .

Providing and laying Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, fecia ,mouldings, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. including carriage of materials upto all leads and lifts.

Providing and laying tor steel(Tata/Sail/RINL/Shyam steel make) reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .

Providing Brick work using common burnt clay building bricks in superstructure 1:6 (1cement:6sand) up to all height including carriage of material within all leads, lifts and heights. 1st class bricks.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : including carriage of materials upto all leads and lifts. (A) For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including carriage of materials upto all leads and lifts.

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including carriage of materials upto all leads and lifts.

Providing and fixing glass glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket and including aluminium beading complete as per the architectural drawings and the directions of Engineer-In_charge including cost of aluminium snap beading . glazing with glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm. including carriage of materials upto all leads and lifts.

Providing and fixing 12mm thick prelaminated Particle board board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. Pre-laminated particle board with decorative lamination on both sides including carriage of materials upto all leads and lifts.

Providing and fixing dyed Stainless steel sliding door bolt with bolts and nuts screws etc., complete: including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. (a) 300X16 mm

Providing and fixing dyed aluminium hooks and eyes dyed to required shade and colour with screws etc., complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. 150mm

Providing and fixing dyed aluminium tower bolt (barrel type) anodized transparent or dyed to required shade and colour with screws etc., complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. ( a). 200x10mm

Providing and fixing Stainless steel handles with necessary screws etc., complete: including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. ( a). 200x10mm

15mm (fifteen milimetres) thick cement plasters in single coat on rough/fair side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 micron over 5 microns primer coating to back coat of polister of 5 micron over 5 micron primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesories as required as per the direction of Engineer-in-charge.

Providing and fixing ridge or hip 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 micron over 5 microns primer coating to back coat of polister of 5 micron over 5 micron primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesories as required as per the direction of Engineer-in-charge.

Providing and fixing M.S.BP sheet 1.66mm to 2mm thick in eaves board /facia /soffits/ elling including ciutting, fixing and welding to steel roof members and applying and coat of red lead primer complete as per the instruction of engineer in charge( base members of steel work shall be measured and paid for separately

Providing and fixing plain absetos cement sheet ceiling of approved quality with butt joints and wood screws (frame work and cover fillets to be measured and paid for separatly 6 mm thick

Steel work welded in build up section, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (a)In beams joists channels, angles, tee, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purling connected to common rafters and the like.

(b) in grating framed guard bars, ladders railing, brackets and similar work.

Painting two coats(excluding priming coat) over new wood and wood based surface either enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping with white enamel paint Asian / Nerolac.

Painting two coats(excluding priming coat) over new steel and other metal surface either enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. Enamle white paint.

Applying Birla white wall care putty two coats over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of materials upto all leads and lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of materials upto all leads and lifts.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth and cement primer complete. including carriage of materials upto all leads and lifts.

Providing and fixing double charge 10mm thick anti skid water proof stain and impect resistent heavy duty and Mat Finish vetrified tiles Nitco or equivalant 800mmx800mmx10mm manufactured of required shade and colour in flooring, treads of steps and landings laid with spacers laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) and jointed with grouting of Epoxy material mixed with pigment to match the shade of tiles in all storeys, height, levels and location as required complete.including carriage of materials upto all leads and lifts.

Naveen rana (BID ID -516514)

Jakir Hussain (BID ID -516372)

Shakun Kumar Gupta (BID ID -516258)

Mukesh Kumar (BID ID -516108)