REPAIR MAINT OF SECURITY/ STREET LIGHTS, HIGH MAST LIGHTS AND OTHER MISC WORKS AT TECH AREA AND SALAWAS AT AF STN JODHPUR

Amount

Supply,fixing in Replacement of automatic street light timer using nature switch for automatic switching of street light based on LUX level of natural light .The sensor (nature switch ) along with suitable power contactor,MCB and support terminal should be enclosed in pole/wall mountable enclosure made of rust proof ,electric shock proof ,termite proof and FR grade SMC junction box confirming to IP 54 suitable for three phase phase of 12KW model -Swadeep -02EC12kW3P of make -Nature switch or equivalent in legrand/siemens.

Supply only LED street light 72W LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source with toughened glass having IP66 protection 230 Volt with all connected acessories required as directed by Engr-in-charge

Supply only LED street light 100W LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source with toughened glass having IP66 protection 230 Volt with all connected acessories required as directed by Engr-in-charge

Supply only LED flood light 200W LED made up of pressure die cast aluminium housing with high efficient LED as lighting source with toughened glass having IP66 protection 230 Volt with all connected acessories required as directed by Engr-in-charge

Supply only LED flood light 100W LED made up of pressure die cast aluminium housing with high efficient LED as lighting source with toughened glass having IP66 protection 230 Volt with all connected acessories required as directed by Engr-in-charge

Supply only LED flood light 150W LED made up of pressure die cast aluminium housing with high efficient LED as lighting source with toughened glass having IP66 protection 230 Volt with all connected acessories required as directed by Engr-in-charge

Supply only flood light fittings LED flame proof ,water proof 100W IP 65,in cast alluminium alloy LM6 construction with toughnened glass with stain steel chain for prevention of light to fall down with suitable wire of 1100 Volt grade three core multi stranded copper conductor all as specified and directed

Supply and fix in repair LED Aviation light-twin 8/6 watt with polycarbonate diffuser & cast aluminium housing IP 65 complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair LED Aviation light-single 8/6 watt with polycarbonate diffuser & cast aluminium housing IP 65 complete all as specified and directed by Engineer-in-Charge

S&F in repair PVC cable Junction box for street light including 6 Amp MCB SP with aluminium bus bar TPN for controlling the Street Lights complete with pole mounting type size 300x200x105mm with 02 Nos. MS clamp of MS flat iron with bolts, nuts and washer complete all fixed on poles/walls as directed by Engineer-in-Charge.

S&F in repair GI pipe bracket, made out of 40 mm dia light grade GI pipe, fabricated into shape and size as required, not less than 1.5Metre long complete with 02 Nos. MS clamp of MS flat iron 40 x 6 mm with bolts, nuts and washer complete all fixed on poles/walls as directed by Engineer-in-Charge.

S&F of XLPE insulated, armoured heavy duty electric cable laid in trench with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 Core as directed

Supply and fix in repairs, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core all as directed.

S&F in repairs, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 4 core all as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc or for laying of cables, errection of poles, struts/stays etc not exceeding 10 sqm on plan and getting out in soft / loose soil.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm in soft / loose soil.

Removing excavated materials to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point in soils.

M & L for Sand cusioning of tibba sand for XLPE cable with screened & washed sand & punning to provide a required cover.

Supply and laying unreinforced precast concrete cable cover, class LV, Type-I flat size 250mm x 150mm x 40mm complete all as specified and directed.

Supply only in repairs, 6 sqmm 2 core, LT 1100 volts grade PVC insulated and PVC sheathed,solid aluminium conductor cable, flat type, 1100 volt in service connections etc all as directed.

S&F with replacement including unservicable MCB 6 to 32 Amps SP 10 KA 'C' Series

S&F replacement including unservicable MCB 40 to 100 Amps TPN 10 KA,415 V 'C' Series

Material and labour complete removal of existing treatment and applying two coats of synthetic enamel paint on LT steel poles of street light of any description (single pole) upto 2.4m height as existing on site in strip of 0.6 m height in blue and white colour alternately as per existing pattern, including cross arm channels and balance height to be painted with two coat of aluminium paint including mentioning pole Nos reflector type on each pole complete all as specified and directed.

Attending and fault detection of day to day street / security light (LED ,MH/SODIAM Flood light fittings etc. of any make) complaints received through telephone or in person and Rectification of defects installed on Dispersal & High Mast light poles,Sun Shelter lights,Hanger light,perimeter light, watch tower light bringing down the fittings on grond or in position including cleaning of glass/ acrylic cover for clear reflection of light,jumper fixing,loose connection,GI bracket tightening, Checking the connection of Street light FRP junction Box,light allignment,replacement of flexible wire ,tightening of flood light safety chain in Hangers ,Proper insulation of cannection (VMTL Vehicle, ladder, tools ,LT tape and takes as required at site for repair/for making light fittings functional shall be provided by the contractor at his own cost and arrangement.Note : (i)Light fitting,MH CHOKE,MH bulb, ignitor,driver,SPD if required to be replaced in repair shall be measured and paid separetely under relevant item (S. No 2 to 7 & 25 to 30) of this BOQ for supply only. . (ii) contractor shall be provide / deputed sufficient number of electricians and helpers ( as directed by Engineer-in-charge) to attend the complaints and reactified the same within 24 hours of receipt of complaints. (iii) contractor manpower should attend daily to recieve complaints at complaint cell at 9.00 AM from JE E/M and report after completion of complaints and handover a complaint slip to JE E/M with user signature as a record of attending the complaints for payment purposes (iv) Contractor will depposit new material to Engineer in charge for acceptance and then material will be issued by JE E/M daily based on assesment of complaints.(v)Old retrived material shall be deposited in AGE E/M yard and will be given to contractor after completion of contract.(vi) Rate of recovery for non rectification shall be Rs 75 per complaint per day as directed by EIC

Supply only electric driver suitable for 75 watt LED street light of existing make all as specified and directed.

Supply only electric driver suitable for 100 watt LED street light of existing make all as specified and directed.

Supply only electric driver suitable for 100 watt LED light compatible with flame proof flood light fitting of existing make all as specified and directed.

Supply only electric driver suitable for 150 watt LED light of existing make all as specified and directed.

Supply only surge protection device rated 5kv for LED type light fitting of existing make all as specified and directed.

Supply only in repair of 2*2.5 Sqmm flexile unarmerd copper cable pvc sheathed for street light to PVC junction box connection in Pvc conduit as directed.

Material & labour for Attending of complaint of existing 12mtr long High Mast light of any type, any wattage & any make ,installed at various location in tech area complaints received through telephone or in person and identification of defects , bringing down the system upto a normal heigt be manual/motorized & fixing at the same position after rectify the defect including flexible wire of required size, cleaning of light Fittings for clear reflection of light, as required to make the light fitting functional (Vehicle, ladder, tools and takes as required at site for repair/for making light fittings functional shall be provided by the contractor at his own cost and arrangement). Note : - (i) Contractor shall be provide / depute sufficient number of electricians and helpers ( as directed by Engineer-in-charge) to attend the complaints and rectified/replacement of parts (ii) contractor manpower shall attend daily to receive complaints at complaint cell at 9.00 AM from JE E/M and report after completion of complaints and handover a complaint slip to JE E/M with user signature as a record of attending the complaints for payment purposes

M&L for repair of mechanism of High mast and rewinding of three phase tower motor 2 HP 440volt AC if burnt and incl. dismantling from high mast transport to workshop for rewinding with existing size of super enameled copper wire, replacing of gear, bearing bush etc for running of rope at satisfoctory level and reinstallation complete all as specified and directed.

Supply and fix in repair brass Nozzels 1/8 inch dia adjustable type for high pressure on fountain pipe line complete all as specified and directed by Engineer-in-Charge

Supply,install,testing and commissioning in repair LED fountain light, SS body (dia 5") 27 W,Red, Green blue complete all as specified and directed by Engineer-in-Charge

Supply,install,testing and commissioning in repair DOL starter, single phase for 1 HP complete all as specified and directed by Engineer-in-Charge

Supply,install,testing and commissioning in repair DOL submersible pummp controller(Standard)-3 phase for 10 HP complete all as specified and directed by Engineer-in-Charge

Supply,install,testing and commissioning in repair LED Post Top gate light,30 W, weatherproof with aluminium housing,IP 65 clear acrylic diffuser, aluminium pole-cap complete with all accessories, suitable for OD of 50 mm pipe including fixing arrangement such as pipe nuts and bolts complete all as specified and directed by Engineer-in-Charge

Supply,install,testing and commissioning in repair submersiable pump set , Single phase 240 V, AC of capacity 1.0 HP complete all as specified and directed by Engineer-in-Charge

Supply,fix and testing in repairs 3 core multistranded copper flat cables for submersible pump motor of size 6 Sqmm complete all as specified and directed by Engineer-in-Charge

Supply,install,testing and commissioning in repair LED Bollard stainless steel,8 W/10 watt, weatherproof circular stainless bollard with acrylic diffuser IP 65 complete with all accessories complete all as specified and directed by Engineer-in-Charge

LOKESH ELECTRICAL WORKS CONTRACTOR (BID ID -3217935)

Nvimal Engineers and Contractor (BID ID -3222782)