Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.4 LAccepted-AOC 205L MODEL TOWN LUDHIANA | LUDHIANA | LUDHIANA | PUNJAB | L1 | Accepted-AOC Lowest | |
| 2 | L2₹7.8 L+₹23,287 (3.06%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹8.4 L+₹83,249 (11.0%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹8.9 L+₹1.3 L (17.2%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹9.3 L+₹1.7 L (22.6%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
30 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAMBA
GE SAMBA
WELCOME MAINT OF MD ACCN IN ZONE-I AT MIL STN SAMBA
2022_MES_521452_1
GE/SMB/T-02/2022-23
Open Tender
Civil Works
Item Rate
180 days
SAMBA
REF NIT
8 documents required · 8 mandatory
₹500
Yes
GE SAMBA
₹20,000
Yes
20 Jul 2022
2 May 2022
1 Jun 2022
2 May 2022
30 May 2022
17 May 2022
2 May 2022 - 4 May 2022
60 days
Amount
Taking down cement plaster on brick/concrete or stone walls, ceiling, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed .
Rendering 15 mm thick in CM 1:4 on walls (external surfaces) fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and fair without using extra cement, complete all as specified and directed .
Rendering 10 mm thick on concrete surfaces in CM 1:3 in ceiling and finished even and smooth without using extra cement over a setting coat 5 mm thick trowelled finish in CM 1:2 , complete all as specified and directed .
Preparation of newly plastered surfaces of walls and applying two coats of cement based paints over a coat of primer, complete all as specified and directed .
Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of white cement putty , complete all as specified and directed .
Preparation of new plastered surfaces of ceiling and applying three coats of white wash , complete all as specified and as directed.
Preparation of new plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of white cement putty , complete all as specified and as directed.
Preparation of old plastered surfaces of walls including brooming down or steel wire brushing, screpping down smoke root etc and applying one coat white wash on old decorated surfaces complete all as specified and directed.
Preparation of old plastered surfaces of ceiling including brooming down or steel wire brushing, screpping down smoke root etc and applying one coat white wash on old decorated surfaces complete all as specified and directed.
Preparation of old plastered surfaces of wall and applying one coat of cement base paint on old decorated surfaces complete all as specified and directed.
Preparation of old plastered surfaces of wall and applying two coat of cement base paint on old decorated surfaces complete all as specified and directed.
Preparation of old plastered surfaces of wall and applying one coat of oil bound distemper on old decorated surfaces complete all as specified and directed.
Preparation of old plastered surfaces of ceiling and applying two coat of oil emulsion distemper on old decorated surfaces complete all as specified and directed.
Preparation of old plastered surfaces of ceiling and applying one coat of oil emulsion distemper on old decorated surfaces complete all as specified and directed.
Complete removal of existing treatment from surfaces of walls by wire brushing and washing, rubbing down and stopping of surfaces and leveling / edging the disturbed planes/ edges including preparation of sufaces and Applying two coats of oil bound distemper over a coat of wall care putty on walls, complete all as specified and as directed.
Preparation of old painted wooden surfaces exc 10 cm in width or girth including knotting and stopping and applying two coats of synthetic enameled paint, complete all as specified and directed.
Preparation of old painted steel surfaces exc 10 cm in width or girth including knotting and stopping and applying two coats of synthetic enameled paint, complete all as specified and directed.
Complete removal of existing treatment from surfaces of walls by wire brushing and washing, rubbing down and stopping of surfaces and leveling / edging the disturbed planes/ edges including preparation of sufaces and Applying two coats of weather proof paint (Apex) over a coat of wall care putty on walls, complete all as specified and as directed.
Taking down cement plaster from chajjas or facia etc, incl. dismantling of damage conerete & repair the same with PCC 1:2:4 type B-0 (using 12.5mm crushed stone aggregate) on chajjas of any width and applying 10mm thick cement plaster in CM 1:3 mixed with water proofing compound(Water proofing compound shall be measured & paid separately) , finished even & smooth using extra cement, complete all as specified and as directed. Noe- Rate quoted shall be deemed to include for scaffolding/formwork for single/double story building of height upto 8.0 mtr and making good the disturbed surfaces.
Demolition of plain cement concrete roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and as directed.
Plain Cement concrete 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in sunken filling and mass concrete, complete all as specified and directed
Dismanting of floor hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises , complete all as specified and directed.
Cleaning of dust removal to all loose existing sunken floor any material manually and with heat tark gun to get smooth plain finished surface including removing of vegetation/plantation with no loose material on surface. Repair all joints and cracks with highly elastic bituminous cold applied putty of tarplasic having penetration after setting upto 8mm. Levelling of surface to give proper slope will be done as per site requirements with Shalipatch or euqivalent make of approved by GE cold applied.Bituminous mortar and cold emulsion cum water proofing liquid of Shalikote-T-10 or equavalent make as approved by GE, created SSD condition on surface with water. Priming the surface with Tarfelt LM or equivalent make as approved by GE mixed with portable water in the ratio of 1:1 and apply @ 400gm per Sqm (as per surface condition). Apply first coat of Tarfelt LM or equivalent make as approved by GE having alongwith 200% conforming to ASTM-C-412 & having crack bridging of 8mm conforming to ASTM-C-836 with tensile strength after 7 days 0.50mm conforming to ASTM-C-412 with no diluation water on primed surface while the surface is still tacky with consumption of 700gm /Sqm.
Lay Geotex of 45 GSM/fiber mesh simultaneously and paste it properly with overlap of 50mm. Allowed of first coat to dry for 10 to 12 hrs. Apply 2nd coat on cured first coat with consumption @ 700gm/Sqm in opposite direction of 1st coat by brush or roller. Allow it to dry for 10-12 hrs after apply 3rd coat with consumption @ 700gm/Sqm. Ensure final curing time of 36 hrs before allowing/carrying out any further work. Conduct ponding test after minimum 7 days applying 2 coats of U V Resistand Elastomeric Exterior Axcrylic weather resistant water proof coating of Shalicryl - 215 or eauivalent make as approved by GE having elongation of 300% after curing of 14 days conforming to ASTM D-6083, for U V protection of bituminous Elastomeric Acrylic emulsified liquid membrance of Tarfelt LM or equivalent make as approved by GE to give long life and prevent its deterioration from sunlight. Note : Application of water proofing treatment will be done by authorised applicator only.
25 mm thick cement concrete 1:2:4, Type B-1 (20 mm graded stone aggregate) as in sub-base of floor for tiles/Kota stone finished even & rough, complete all as specified and directed
Non skid coloured ceramic tiles (1st quality) 7 to 8mm thick(square/rectangular joint free) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, complete all as specified and directed
Non skid coloured ceramic tiles (1st quality) 7 to 8mm thick(square/rectangular joint free) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, complete all as specified and directed
Dark shade vitrified tiles (1st quality) 10 mm thick(square/rectangular joint free) , double charged, polished area of each tiles not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, complete all as specified and directed
Dark shade vitrified tiles (1st quality) 10 mm thick(square/rectangular joint free) , double charged, polished area of each tiles not exceeding 0.36 sqm as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering of mortor 10mm thick in CM 1:4 complete all as specified and directed
Glazed coloured ceramic tiles (1st quality) joint free in vertical surfaces of wall of size 450x350x7mm/350 x250 x 7mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 on brick /concrete surfaces complete all as specified and directed .
Vitreous china ,Squatting pan 'Orissa' pattern size 580x440mm white with integral foot rest including all joints and making good to the floor etc fixed in repair ,complete all as specified and directed.
Vitreous china wash down water closet pan padestal pattern white, excluding fixing bolts, flushing cistern but including flush pipe, seat and cover, fixed in repairs complete all as specified and directed.
Vitreous china WHB size 550x400mm including cutting or pinning inends of brackets or erecting incl32mm dia waste pipe complete all as specified and directed
PVC valveless, 10 ltrs, syphonic action type, dual type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, fixed in repair, complete all as specified and directed
C.P. shower rose 125 mm size for 15 mm bore pipe, fixed in repair, complete all as specified and directed
C.P. Bib taps, long shank(Fancy type) 15mm bore cast copper alloy ,screwed down,screwed for iron pipe or brass ferrule complete all as specified and directed
C.P. Stop valve (fancy type) 15mm bore,cast copper alloy screwed down,high pressure, screwed both ends for iron pipe or unions complete all as specified and directed
15mm bore Brass C P (Fancy type) wall mixer for Hot & Cold water, screwed both ends for iron pipe or for unions and fixed in repairs.complete all as specified and directed
C.P. Angle valve (fancy type) 15mm bore,cast copper alloy screwed down,high pressure, screwed both ends for iron pipe or unions complete all as specified and directed
Tubular towel rail 20 mm dia, brass chromium plated, 60cm long between flanges complete all as specified and directed
C.P. pillar tap( fency type 15mm bore)cast copper alloy with capstan head CP screwed down high pressure with or without letter and 'Hot' or 'Cold' with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed
PVC connection 15mm dia, 450mm long with brass nut complete all as specified and directed
C.P Brass grating with hole 150mm dia as per sample to be fixed with white cement complete all as specified.
Dismantling of CI or Concrete drain pipes up to 150mm dia, jointed in cement mortar and taking out from trenches,if required complete all as specified and directed .
Taking down eaves gutters and PVC rainwater / drain pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning for refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed .
PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed
PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed
PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.
PVC (SWR) 110mm bore bends any radius, complete all as specified and directed .
Taking down GI pipe 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed
G.I. pipe 15mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling or laid in floors complete all as specified and directed
G.I. pipe 15mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling or laid in floors, but except pipe complete all as specified and directed
Taking down GI pipe 20mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed
G.I. pipe 20mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling or laid in floors complete all as specified and directed
G.I. pipe 20 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling or laid in floors, but except pipe complete all as specified and directed
Cutting chases,pining in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing steps, cills, sunshades ,shelves,lintels,etc.; and cutting chases for concealed water tubing or concealed conduit,wiring,etc,and making good cutting not exceeding 10 cm girth in brick walls. complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each including cutting holes for taking out hold fasts of dismantling brick work ( holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. Note- Scrap iron for window grill and angle measured separetely)
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm but not exceeding 4 square metre each including cutting holes for taking out hold fasts of dismantling brick work ( holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed. Note- Scrap iron for window grill and angle measured separetely)
Taking down shutter of any description not exc. 1.0 sqm each and removing to store.complete all as specified and as directed.
Taking down shutter of any description exc 1.00 Sqm but not exc. 2.0 sqm each and removing to store.complete all as specified and as directed.
Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed .
Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed .
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel, sheeting or other covering, running rails and guides) and fixing complete conforming to Fe-410. Gde-E-250, complete all as specified and directed.
2nd class hard wood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed .
2nd class hard wood Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed .
Factory made solid PVC door frame of size 50x47mm made out of 5mm thick prelam PVC sheet with one or more rebate reinforced with MS square tube, fixed in opening as per specification & drawing No CEPZ/TD-378/11 sheet No 1/1, etc complete all as specified and directed.
Factory made Solid panel PVC Door Shutter, 30mm thick (style),consisting of frame made of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles & rails with suitable PVC sheet beadding and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
25mm Block boards, grade 1 quality, exterior grade, commercial type, fixed in repairs with screws/welding to timber frame/steel angle-work, complete all as specified and directed .
18/19 mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination as in cupboards, & drawers shelves etc. complete all as specified and directed .
30 mm flaps width continuous (paino) hinges, mild steel brass bright finished or electro galvinised, complete all as specified and directed.
100mm long Hasp and Staple aluminium anodised.Complete all as specified and directed.
Stainless steel wire grade SS-304 cloth 0.36mm nominal dia of wire and average width of perture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed .
Aluminium tower bolt (150 mm long), anodised barrel tower bolts of extruded section complete all as specified.
Aluminium handle 150 mm long cast type anodised, complete all as specified and directed
250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed .
Butt hinges 100 mm medium weight stainless steel complete all as specified and directed
150mm, MS ordinary door spring plate type incl roller and roller plate complete all as specified and directed .
Preparation of new wooden surfaces and applying two coats of synthetic enamal paint on wood/wood based surfaces over 10cm width or girth. complete all as specified and directed .
Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer exc.10cm width or girth. complete all as specified and directed .
2nd class hardwood plain fillets, square / rectangular / triangular in section, clean sawn, secured with nails or brads exc. 6 Sq.cm and n.exc. 13 Sq.cm in section, complete all as specifed and directed.
2rd class hardwood plain fillets, square / rectangular / triangular in section, clean sawn, secured with nails or brads exc. 13 Sq.cm and n.exc. 25 Sq.cm in section, complete all as specifed and directed.
MS (SS-304) powder coated drapery rods fixed in repair of dia 20mm with funnels, side brackets & end caps etc on each side complete all as specified and directed .
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
M/S NAGAR BUILDERS
Manminder Singh and Co
M/S RAMESHWAR ENGINEERS & BUILDERS
M/S RAJESH SHARMA & CO.
M/S BAWA TRADING CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .