Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.3 LAccepted-AOC KUMMAMKULAM HOUSE KADAVANTHRA KOCHI 682 020 | ERNAKULAM | KERALA | 682020 | L1 | Accepted-AOC BEING L1 AND REASONABLE | |
| 2 | L2₹41.0 L+₹6.8 L (19.7%)Rejected-Finance ATRIA APARTMENTS 6TH FLOOR A 6 OPPOSITE GURUDWARA PERUMANOOR POST KOCHI 682015 | KOCHI | ERNAKULAM | KERALA | 682015 | L2 | Rejected-Finance Documents found correct | |
| 3 | L3₹45.4 L+₹11.2 L (32.6%)Rejected-Finance CHATHANATTU HOUSE XXIII 362B 1 AYYANKALI ROAD EDAKOCHI KOCHI 682 010 | KOCHI | ERNAKULAM | KERALA | 682010 | L3 | Rejected-Finance Documents found correct |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(NW)KOCHI
GARRISON ENGINEER (NW) MILITARY ENGINEER SERVICES NAVAL BASE POST -682 004
AS PER BOQ AND TENDER DOCUMENT
2024_MES_663892_1
8353_GE_NW
Open Tender
Civil Works
Item Rate
365 days
KOCHI
AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
GE(NW)KOCHI
₹99,800
Yes
14 Dec 2024
4 Jul 2024
6 Sept 2024
4 Jul 2024
4 Sept 2024
19 Jul 2024
4 Jul 2024 - 24 Jul 2024
Amount
Notes:- 1. Contractor should deploy data entry operator to print the complaint slip from complaint cell daily at 8.30 AM to 5:30 PM with necessary stationary required and also take printout of job cards. 2. All complaints to be rectified in time. The Delay in rectification of complaint more than the specified time in the following condition, penality will be levied @ Rs.500.00 Per complaint as follows. (a) Item No 1 to 6, 38 to 64 complaint should be rectified within 24 hours (b) all other complaint should be rectified in 07 days except major complaints (c) all Major complaint should be rectified in 28 days. “No complaint should be pending more than 28 days” . (d) In case of any urgent / Emergency nature of work, plumber/carpenter/mason shall available 24 hours x 7 days and nothing extra shall be admissible on this account. 3. The complaints shall be communicated to the contractor/rep of contractor/ site engineer / site supervisor through Online compliant management portal/website, SMS, Telephonic calls, Letter / Register or other suitable mean of communication at any time. 4. All complaints related to Sanitary fittings / plumbing fittings/ Builders hardware, materials to be purchased as per approved make and kept in store and in case of complaint immediately to be attended. 5. The quoted rates includes the scaffolding/staging upto 10 floor height and shaft portion etc. 6. The quoted rates include all the safety equipment's to be used like glouses, safety belts, helmets, mask, safety goggles etc 7. The type of complaint will be decided by Engr-in-Charge. If contractor is not agreeing to the decision of Engr-in-charge the same shall be referred to the Accepting officer whose decision shall be final, binding and conclusive.
Attending day to day complaints related to water supply & plumbing work such as leakage of bib cock,/pillar cock/ stop cock / angle valve of any description, replacing the washers, cleaning of air lock in the pipe complete all as specified and directed. Note:- (a) The cost of material such as threads, washers, lead etc shall be included in the quoted rate. (b) Rectification of leakage by replacing tap washers, tightening the handle/knob/nuts/screws, tightening loosely fitted tap, replacement of thread seal tape/cotton thread, removing any blockage from tap or PVC connection pipe, tightening PVC connection pipe etc will be treated as minor / petty repairs. (c) Tap washers, washers for PVC connection pipe, nut/screw, thread seal tape/cotton thread, shellac, solvent cement etc shall be treated as minor items which shall be provided by the contractor as required with out extra cost. Quoted rate shall be deemed to be inclusive of same.
M&L for Repairs to low/high level flushing cistern including replacing the syphon, washers, handles, float valves, stopping leakage of Down pipe by applying m-seal, providing flush tank cover if missing and other related works of to make the flushing cistern functional complete all as specified and directed. Note:- (a) The cost of material such as threads, washers, lead etc shall be included in the quoted rate. (b) Rectification of leakage by correcting siphon washers, replacing washers of PVC connection, tightening the handle/knob/nuts/screws, tightening or replaced loosely fitted float or ball, removing, cleaning and re-fixing of siphon, replacement of thread seal tape/cotton thread, removing any blockage from inlet/out let mouth or from PVC connection pipe, tightening PVC connection pipe, fixing of flush pipe and cone, handle, brackets etc will be treated as minor / petty repairs. (c) Washers for PVC connection pipe, nut/screw, thread seal tape/cotton thread, shellac, solvent cement, M seal etc shall be treated as mirror items which shall be provided by the contractor as required with out extra cost. Quoted rate shall be deemed to be inclusive of same.
Attending day to day complaints and carrying out Petty/minor repairs to joinery and builders hardware's, such as easing/adjusting of shutters of any type or size, re-fixing of wire mesh, cub board shutters/shelves, easing/adjusting/re-fixing of hinges, tower bolts, handles, stoppers, sliding bolts / locks, magic eye, hook and eyes, hasp and staples, etc, of any type and size, and ensuring proper and trouble free functioning, including providing and replacing minor items complete all as specified and directed. Note:- (a) Easing/adjusting of shutters and builders hardware's, tightening the handle/knob/nuts/screws, oiling/greasing of builders hardware's etc will be treated as minor / petty repairs. (b) Screws, nails, adhesives etc shall be treated as mirror items which shall be provided by the contractor as required with out extra cost. Quoted rate shall be deemed to be inclusive of same.
M&L repairs to plaster in wall/floor or ceiling using CM 1:4 incl preparing the patch surface by cutting out to nearest regular shape, removing loose particles, and cleaning the surface, applying neat cement slurry as required,including finishing the patch even and smooth without using extra cement and to match with existing surface , patches area n exc 2.00 Sqm each patch and removal of rubbish off the premises complete all as specified and as directed. Note:- (a) Necessary scafolding, Curing for specified period and leaving the site neat and clean shall be deemed to be included in quoted rate
M&L in repair cutting out floor and removing damaged floor/nahani trap, providing and fixing new floor trap/Nahani trap including making good floor to match existing flooring including joining trap to pipe line, sealing any voids, using CM 1:3 including water proofing compound, cement concrete 1:2:4,cleaning the pipes etc complete all as specified and directed.
M&L Petty repair of concealed flushing cistern by replacing existing float valve and discharge valve including minor adjustments and servicing of complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.
M&L Glazed ceramic tiles in vertical surface area exc 0.06 sqm but not exc 0.36 Sqm such as skirting or dado laid over and incl cement mortar backing coat set and jointed with neat cement slurry and pointed in white or coloured cement to match including backing coat in CM 1:4, 10mm thick complete all as specified and directed.
M&L Non skid jointless ceramic tile of area exc 0.18 sqm but not exc 0.36 Sqm in floor over and incl cement screed 15 mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L Non skid jointless ceramic tile of size exc 0.09 sqm but not exc 0.36 Sqm as in skirting over and including cement backing coat 10mm thick in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L vitrified tiles of size not exc 0.36 Sqm in floors with approved Pattern over and including cement screed 15 mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L Vitrified tiles of size not exc 0.36 Sqm as in skirting over and including cement backing coat 10mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M & L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set in neat cement slurry with grey cement and pigments laid over and including 20 mm thick screed bed in CM 1;6 and including taking down old tiles complete all as specified and directed.
Demolition of stone slabs/tiles of any description or thickness laid and bedded in any mortar complete all as specified and directed.
M&L 18 to 20mm thick granite stone slab (Jet black ) over and including cement screed 15mm thick in CM 1:4 over RCC/any type of Slab complete all as specified and directed .
M&L Machine cut kota stone slab flooring 20-25mm thick over and cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for machine cut pre polished Kota stone slab 20-25 mm thick (single piece) as in risers to steps, skirting/dado, pillars, window cills and the like, laid over and including 10mm thick rendering in cement mortar 1:3, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.
M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded crushed stone aggregate) as in plinth protection /hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed.
Demolition of brick / block / stone / works boulders masonry built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed
M&L pre cast cement concrete block masonry 1;3;6 Type C1 with solid blocks exec 10 cm in width and setting in CM 1:6 complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water any description, etc complete all as specified and directed. Note for Item no 24 to 32: - The work to be executed in any location/floor (multi-storey buildings) including in shaft portion, Quoted rates includes scaffolding / staging and work in foul condition etc
M&L for rendering 10mm thick mixed with liquid water proofing compound on fair faces of brick work or concrete surfaces, on brick work or concrete wall surfaces in 1:6 cement mortar, finished even & smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick mixed with liquid water proofing compound on fair faces of brick work or concrete surfaces 1:4 cement motor, finished the surfaces even and fair without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid separately.
M&L for rendering 5mm thick in CM 1:3 mixed with liquid water proofing compound on fair faces of concrete surfaces on ceiling finished even &smooth without using extra cement complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer with 1.5mm thick wall putty complete all as specified and as directed.
M&L for preparation of newly plastered wall surfaces and application of two coats of cement based paint over a coat of primer all as specified and directed
M&L for preparation of newly plastered ceiling surfaces and application of three coats of white wash all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
M&L MS Framed work confirming to Fe 410 -W (Gde- E- 250) quality- A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and directed.
S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of anti corrosive paint over a coat of Epoxy primer complete all as specified and directed.
S&F in repair 32 mm dia PVC waste pipe of length minimum 1.2 meter with cup head for Wash Hand Basin complete all as specified and directed.
S&F in repairs stainless steel sink with draining board made out of 1.0mm thick sheet for kitchen with plug , washers waste pipe , cast iron cantilever brackets connecting union over all size 915X460mm with bowl size 410X330X160mm complete all as specified and directed.
S&F in repair 15mm bore Pillar taps, in repair cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make :- Prayag Cat No. 6402 or equivalent manufacturers mentioned in list of manufacturers
S&F in repairs CP tubular towel rail 20mm dia , 500mm long complete all as specified and as directed. Make :- Prayag Cat No BA-30 B161 or equivalent manufacturers mentioned in list of manufacturers
S&F in repair for CP towel ring round with flange complete all as specified and directed. Make :- Prayag Cat No BA-31 or equivalent manufacturers mentioned in list of manufacturers
S&F in repair 100mm to150mm dia SS grating doom with or without hole for waste pipe complete all as specified and directed.
S&F peg set of 6 pin, hooks & rail of stainless steel and fixed with screws complete all as specified and directed.
S&F in repairs Stainless steel Soap dish fixed with screws complete all as specified. Make : Prayag Cat No BA-45 or equivalent manufacturers mentioned in list of manufacturers
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 6cm wide with chromium plated bracket guard and railing 50cm long incl aluminium alloy bracket and guard rail. Make:- Prayag Cat No BEA-47 or equivalent manufacturers mentioned in list of manufacturers
S&F in repair corner shelf with 5.5 mm thick sheet glass and SS railing of approved quality fixed with brass screw complete all as specified and directed Make : Prayag Cat No BEA-46 or equivalent manufacturers mentioned in list of manufacturers
S&F in repair Vitreous china wash down water closet pan (EWC), any colour, pedestal pattern fixed complete all as specified and directed.
S&F in repair Waste fittings, brass, chromium plated 40mm dia for sinks, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed waste coupling for sink complete all as specified and directed.
S&F in repairs white glazed vitreous china WHB flat back size 550x400 mm including CI bracket incl PVC waste pipe 40mm bore 90cm long with cup, spring type and 32mm brass chromium plated waste fitting, complete all as specified and directed .
S&F in repairs Plastic seat and cover, any colour closed pattern with flat bottom & cover and mild steel chromium plated or aluminium hinges, etc including fixing bolts complete all as specified and directed .
S&F in repair vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with integral foot rest including connection to trap, and flushing pipe, anti-syphonage pipe, etc and including cement concrete bedding complete all as specified and directed .
S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, 10 ltr capacity any colour, with inlet ball valve, float and handle including brackets and all connections, ISI marked complete all as specified and directed .
S&F in repairs PVC connection 15mm bore 45cm long with complete all as specified and directed .
S&F in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with PTMT Urinal spreader, grating and Union for discharge pipe complete all as specified and directed . (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S&F in repairs Chinaware partition for urinal of size 310x700mm complete all as specified and directed.
S&F in repair vitreous china table top WHB,, size 640 x 400 x 120mm excluding taps, waste, chain and plug and porcelain stopper complete all as specified and directed
S&F in repair brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed .
S&F in repair vitreous china wash down water closet pan single piece (pedestal pattern) size 365 x 655 x 760mm UF soft close seat cover fixing accessories set and accessories set cistern fittings and S trap 220mm complete all as specified and directed.
S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed .
Taking down chowkats n.exc 1.5Sqm with shutters (without taking off shutters from the frames) complete all as specified and directed .
Taking down chowkats with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed .
Taking down shutters of any description n.exc 1 Sqm each complete all as specified and directed .
Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed .
M&L 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed .
M&L 2nd class HW 30mm thick Plain framed, panelled factory made shutters (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed .
M&L 2nd class HW 30mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (B); supplied and fitted to chowkats complete all as specified and directed .
S&F 30mm thick Flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .
M&L 18-19 mm thick pre laminated particle board exterior grade one side with decorative choice lamination & other side balancing white lamination fixed with nails and screws for Cupboard including taking down of existing board.
S&F in repair Continuous ( Piano) hinges width of flap 30 mm complete all as specified and directed .
S &F in repair stainless steel self closing type hinges for kitchen cabinet of approved quality all as specified and directed.
M&L Antitermite post construction treatment at all points of contact of wood work by chemical emulsion @0.5litre/ hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed .
M&L preparation of new wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed .
S&F in repair two legged aluminium floor door stopper with rubber shoe 140mm long complete all as specified and directed.
S&F in repair MS helical door spring 300mm long including roller and roller plate complete all as specified and directed.
M&L for hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed .
S&F 4mm thick Sheet glass one side frosted, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed .
S&F 4mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed .
S&F 4mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed .
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless , steel cover, governing picot made of brass other parts made of mild steel heavy duty complete all as specified and directed .
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed .
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick with particle board core (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed .
M&L for adjusting, easing and carrying out minor repairs to aluminium doors/windows of any size, pattern and with two/three shutters & and ensuring proper functioning of the windows including changing of pivot, repairs to lock, handle, rubber beadings etc complete all as specified and directed .
S&F aluminium powder coated door shutter with frames of size - 40x45x1.8 mm incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, suitable handle, tower bolt, SS butt hinges, mortice lock 4 lever with 65 mm latch size including aluminium anodized door frame of size 60x 40 x1.8 mm thick fixed to wall with necessary screws and plug complete all as specified and directed . Note:- The quoted rate shall include the cost of one No. hydraulic door closer per shutter & 5 mm thick tinted glass /4mm thick ACP sheet to be fitted in shutters )
S&F in repairs, 16-18mm MDF DWR Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including beading /matching laminates to exposed edges of board complete all as specified and directed.
S&F Aluminium powder coated fixed type windows including suitable nylon beading channel gasket etc complete with following specification complete all as specified and directed . :- Frame :- 60mmx40mmx1.80mm Panel :- 4mm thick ACP sheet / 5mm thick tinted/frosted glass of approved colour and design
S&F 4mm thick coloured/wooden grain aluminium composite panel cladding to PVC rainwater pipe /RCC column etc and including aluminium framing complete all as specified and directed
S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, Aluminium(Die cast) body complete all as specified and directed .
M&L PCC 1:2:4 type B-1,using 20mm graded stone aggregate for fixing hold fast including necessary form work complete all as specified and directed .
S&F MS work as in hold fast and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.
S&F 100mm stainless steel butt hinges, medium wt. complete all as specified and directed .
S&F 75mm stainless steel butt hinges, medium wt. complete all as specified and directed .
S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed .
S&F 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed .
S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed .
S&F 150mm long Aluminium handles, cast type, anodised complete all as specified and directed .
S&F in repair 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed. complete all as specified and directed .
S&F in repair 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed .
S&F in repair 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed .
S&F in repairs 125mm long Aluminium handles, cast type, anodised complete all as specified and directed .
S&F in repairs 150mm long Aluminium handles, cast type, anodised complete all as specified and directed .
S&F in repair stainless steel 4 lever Mortice lock, vertical type, size 100 mm complete all as specified and directed .
Dismantling Single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed .
Dismantling Battens for tiles, shingles etc, of any size including tilting fillets spaced n.exc 15 cm complete all as specified and directed .
Dismantling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, unframed work complete all as specified and directed .
M&L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed .
Fixing only Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed . Note: The tiles dismantled vide item No.107 shall be re-used.
M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6
M&L 2nd class HW Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 sqcm & n exc 25 sqcm
M&L 2nd class HW Clean sawn battens at 15 cm centres, exc 5 & n.exc 15 sqcm
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed .
M&L 2nd class HW Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed .
M&L Preparing the surfaces of battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) with two coats of creosote oil complete all as specified and directed .
Dismantling timber scantling 40 Sqcm and over in section unframed work in any position complete all as specified and directed .
M&L for 2nd class hard wood in scantling clean sawn fixed as in purlins, rafters, etc in roof complete all as specified and directed .
Dismantling plain or corrugated steel sheeting, any gauge, thickness incl Nainital or similar pattern roof covering complete all as specified and directed .
S&F for pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified.
S&F for pre-painted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as complete all as specified and directed .
S&F Plain aluminium sheeting 0.71mm thick, Alloy 31000H4 in ridge, hips, valley gutter, drip and straight flashings complete all as specified and directed .
M & L for continuous welding in repairs exc 2.5cm but n exc 5 cm in length Thickness of Metal to be welded not exc 6mm complete all as specified and directed .
Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for (reinforcement cut to facilitate demolition) complete all as specified and directed .
M&L RCC (1:2:4) type B-1 (Using 20mm graded crushed stone aggregate) as in slabs, shelves supported on walls, beams and columns in floor or roof including balconies, canopies, deck slabs or in Chajja/facia projection and the like complete all as specified and directed .
M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed .
M&L for use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for rough finished flat surfaces (Horizontal or sloping) complete all as specified and directed .
S&F in repair precast cement concrete type B0 1:2:4 louvres and jallies, 45mm thick (measured solid), including all moulding complete all as specified and directed
M&L preparing old treated surface of wood or wood based material of any description including filling of holes by filler (fevicol and wooden dust) exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified
M&L complete removal of old treated steel surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified
M&L preparing old treated surface of steel of any description n.exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified
M&L for water proofing for sunken slabs including all materials as per the stages described below, complete all as specified and as directed. (a) Remove all dust, oil, dirt, laitance and other containments, loose particles from concrete surface . (b) Chamfering the floor wall junctions with cement mortar 1:4 admixed with NitoBond Sabra or equivalent @ 1 litre per 50 Kg bag of cement. (c) Annular space of out let/spout pipes shall be packed and sealed using Conbextra GP2 or equivalent mixed water and filling as per manufacturers specifications. (d) Carrying out ponding for minimum of 48 hours (e) Injection grouting of all leaking spot and honey combs with cementitious pressure grouting with 40psi pump using Cebex 100 or equivalent @225 gms mixed to 50 Kg bag of cement incl joints packing using polymer modified mortar. (f) Providing and applying water proof coating using fosroc Nitoproof 600 or equivalent, over dry surfaces to achieve 1.5mm thick with 02 coats with interval period of 6 hours over the surface using spray/ squeegee/ roller/ brush. Water proofing coating shall have the elongation of 500-700% (ASTM D412-90), tear resistance of 21Kn/m (ATMD624-00) and tensile strength of >1.9 N/mm2. Termination to be done on wall extending the coating to min 300mm height above the finished floor level as per vendor recommendation. Laying 200gsm non-woven geo textile membrane over Nitoproof 600 coating with overlap sealed complete all as specified and directed . Make:- FOSROC or equivalent as approved or equivalent manufacturers mentioned in list of manufacturers
M&L 50mm thick PCC (1:2:4) type B1 (Using 20mm graded stone aggregate) for sub base of sunken portion complete all as specified and directed .
M&L for PCC type E2 1:5:10(40mm aggregate) in sunken floor of toilet/bathroom finished fair and even complete all as specified and directed .
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed .
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including frame work cover fillets etc complete all as specified.
Supply, Providing and fixing suspended false ceiling consisting of 12mm thick Gypsum seamless board suspended on GI frame work with staggered joints, GI frame work to consist GI perimeter channel 25mm x20mm of 22 gauge along perimeter of false ceiling. Channel section of 50x25mm of 22 gauge and at 300mm C/C throughout one way fixed with Screw/nut bolt and other direction 40 x 15mm x 22 gauge channel provided for interlocking with GI cleat and expansion fasteners including hangers 6mm dia G.I. fixed to roof truss, Boards are to be joined and finished so as to have a flush look which includes finishing the tapered and square edges of the gypsum board with joining compound paper tape and two coats of plastic emulsion paint over one coat of primer & one layer putty 1.5mm thick suitable for gypsum board including necessary scaffolding and shuttering complete as directed as specified and directed by Engr-in-Charge.
S&F Aluminium snap grid false ceiling on frame work of aluminium angle 25x25x2 mm, Main TEE 38x25x1.5 mm and cross TEE 25x25x1.4 mm and size of grid 605x605 mm with hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.50 mm dia, 40 mm long with and including provn of 4mm thick Non asbestos fibre cement building boards fixed to aluminium frame work with screws including preparation of new ceiling surfaces and applying one coat of white washing to new ceiling surfaces including preparation of surfaces complete all as specified as per manufacturer's instructions and all as specified and directed.
Repair to rolling shutter without taking off, any size and including greasing, oiling to all connected accessories for trouble free functioning complete all as specified and directed .
Repair to rolling shutter after taking off, any size and including greasing, oiling to all connected accessories and make functional the operate gear box and all other accessories for trouble free functioning complete all as specified and directed.
M&L Welded steel wire fabric weight n.exc 4 kg/sqm fixed to steel members complete all as specified and directed .
S&F in repairs PVC (SWR) bends any radius 75mm bore complete all as specified and directed .
S&F in repairs PVC (SWR) bends any radius 110mm bore complete all as specified and directed .
S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps of height up to 15 m, 75mm bore pipe complete all as specified and directed .
S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps of height up to 15 m, 110mm bore pipe complete all as specified and directed .
S&F 200 mm dia half round or 180 mm width rectangular PVC SWR ready made eaves gutter of pressure rating 6 Kg/cm2 of approved make including necessary fitting like bend, MS Clips etc complete all as specified and directed .
S&F 150mm dia PVC (SWR) pipe single socketed in any length with rubber joints including necessary fitting like bend, MS clips etc fixed on walls complete all as specified
S&F wooden flooring in long plank thickness not less than 12 mm and 2 way bevel complete all as specifies
M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and washing the surface with Bleaching powder solution for treatment of fungal growth and applying two top coats of exterior anti fungal acrylic emulsion paint (Apex ultima protek (Asian paint or its equivalent make) having over and including a coat of exterior water base coat and 1.5mm thick exterior putty wherever required all as specified and as per instructions of manufacturer and as directed. NOTES:- (i) The old surface must be prepared in a manner so that there should not be no impression of dent and surface shall be made even all as per manufacturers instruction before application of emulsion paint / putty/ primer. The cost of materials (like putty, base coat/topcoat of exterior paint), labour & T&P wherever required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of approved manufacturer. The contractor shall give FIVE years of performance warranty for the work executed. Guarantee certificate shall also obtained from the authorised applicator of manufacturer and submitted to GE for record.. (iii).After carrying out preparation of surface the same shall be got approved from Engineer in charge before application of exterior emulsion for each building. (iv) The cost of Scaffolding and safety measures wherever required are deemed to be included in the rates quoted by the contractor
M&L Complete removal of existing treatment on wall by washing down and rubbing and applying two coats of cement base paint over a coat of primer all as specified
M/L for Preparation of old recorated surfaces of Ceiling, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spotsetc and applying one coat of white washing on ceiling complete all as specified and as directed.
M/L Preparation of old plastered surfaces of walls including washing rubbing down and stopping of distempered and painted and applying one coat of distemper oil emulsion washable on old decorated surfaces on walls including filling of nail holes/disturbed surface by cementious wall care putty all as specified and as directed.
M&L for complete removal of old finishes surfaces of walls including washing rubbing down and stopping of distempered and painted and applying two coat of distemper oil emulsion over a coat of primer over a coat of 1.5mm thick wall care putty including filling of nail holes/disturbed surface by cementious wall care putty all as specified and as directed.
M&L for Preparation of existing treated surface and applying one coat of exterior anti fungal acrylic emulsion paint (Apex ultima protek (Asian paint or its equivalent) at any storey, including provn and removal after use, of necessary scaffolding, complete all all as specified and as directed by Engineer In Charge.
M&L preparing old treated surface of existing treatment on external surfaces of wall and applying one coat cement based paint including filling cementious exterior grade wall care putty on disturbed portion of wall as required all as specified
Destruction of growth of weed plants with roots from on the roof of bldgs and on the wall of bldgs (any height) with 2.40 oil mixed veedicides or mixed with veedol chemical solution and sprayed on and around roots and at places of possible growth of weeds and making good damaged surfaces by plastering, pointing etc complete all as specified and as directed by Engr-in-charge.
S&F complete removal of existing surface by jet washer , oil and grease of wall upto 100mm from top level of moisture content and prepration of surface and applying two coat of acrylic interior sheen emulsion bison glow or equivaletnt over a damp proofing barrier based Nano technology premium quality acrylic primer Dampstop duo over a home shield water proof putty over a undiluted two coat of penetrative cum film forming water proofing barrier system with a water proofing effect upto 4 bars negative water pressure Dampstop Advanced complete all as specified
S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed
S&F polycarbonate sheet of approved make & conforming to IS : 14443-1997 and having 2 wall 10 mm overall thickness, 50 micron UV protection layer under co-extrusion, fitted and fixed 60 mm wide aluminium channel section top and bottom members in dry glaze sandwich system, (unit wt of top and bottom members: 0.375 kg/m & 0.69 kg/m), EVDM quality rubber gaskets, anti dust tape, end closer “C” channel and 75 mm long self tapping screw being drilled through the center leg of the bottom section with nuts placed at 300 mm C/c without punchering the polycarbonate sheet, EPDM Washer 16mm dia & 3mm thick washer etc complete as per manufacturers specification and direction of GE
M/s T.P SHAJI (BID ID -3071883)
ANIE JOHN CONTRACTORS (BID ID -3069356)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .