Providing passanger high roof shed at pugalur -Noyyal road near Roundana at Pugalur Municipality

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Footing & Grade Beam

Column

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supplying and fixing in position of Name board by using the M.S square pipe of size 35x35mm alround the name board and intermediate vertical pipe is same as above. 18 guage M.S sheet is fixing on the top of M.S pipe and the Aluminium beeding is fixing alround the name board and vinuyl sticker lettering,Lighting is fixing on the name board etc., complete. The rate shall be inclusive of cost material,loading & un loading, Transportation charge and any other I.C etc., complete as directed by the departmental officers etc., complete complying with standard specification.

Supplying and fixing 3-seater powder-coated mild steel waiting chair made of perforated steel seat and backrest, with individual armrests and tubular steel leg supports, complete in all respects. The chair shall be made of perforated CR steel sheet (minimum thickness 1.2 mm) for seat and back portions, welded to a common MS rectangular beam frame, with all components powder-coated to a minimum 50 microns thickness in approved colour. Each leg shall be fabricated from MS tubular section with end supports and rubber shoes. Including cost of all materials, labour, transport, loading, unloading, welding, powder coating, polishing, and fixing in position as directed by the departmental officers.

Wiring with 2x4 sq.mm PVC insulated SC unsheathed FRLS copper cable conductor cable of 1100V grade insulatable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box for 15A 3 pin non-interlocking CS plug with painting of suitable colour with continuous earth wire connection by 4 sq.mm copper wire for open power plug point. SD-13.

Wiring with 2x1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil). SD-17.

Supplyand Delivery of 90W Street light fittings with Dimmable Driver and 5 pin NEMA Socket including cost and conveyance of all materials and alllabour charges etc complete with rate of life of lamps - 50000 burings hours, warrenty-1 year,Lumens/watts-120, Colour Temperature- Above 5000K. (As per CMA Approved Street Light Rate S.No.11)

Supply, Delivery and Fixing of 4' 18W Crystal Glass LED Tube Light Fitting. Ref. SOR 2025-2026 Page no.165 item no. M-1211

Supply, Delivery and Fixing of AC Ceiling Fan Complete 1400 mm (56") Sweep with 300 mm Down Rod (without Regulator). Ref. SOR 2025–2026Page no.171 item no. M-1334.

Supplying and run of 4 x 10 sq.mm (84/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains etc., complete as per standard specifications

MODERN ENGINEERING WORKS (BID ID -1540497)