Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.1 LAccepted-AOC | L1 | Accepted-AOC L1, being lowest. | |
| 2 | L2₹39.6 L+₹1.3 L (3.32%)Rejected-Finance RH NO 06 KARMA KSHETRA HOUSING SOCIETY SECTOR 29 PRADHIKARAN RAVET POST DEHU ROAD 412 101 | NA | NA | 412101 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹48.4 L+₹10.0 L (26.2%)Rejected-Finance 0001D ATM HOUSE AIR FORCE NEENA THAPA GORAKHPUR UTTAR PRADESH 273008 UDYAM UP 32 0054752 | GORAKHPUR | UTTAR PRADESH | 273008 | L3 | Rejected-Finance Not being lowest | |
| 4 | Rejected-Technical 24 25 MANGAL ARCADE TELCO ROAD OPP HOTEL DOUBLE TREE MOHAN NAGAR CHINCHWAD PUNE 411019 | PUNE | MAHARASHTRA | 411019 | - | Rejected-Technical Rejected |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
3 Sept 2024, 6:00 pmClosed
GE DEHU ROAD
GE DEHU ROAD, PUNE
MAINTENANCE AND REPAIR OF LOW TENSION OVERHEAD LINE AND UNDER GROUND CA-BLE REPAIR AND MAINTENANCE OF EXTERNAL PANELS ,FEEDER PILLAR BOX AND ALLIED WORKS IN WEST AREA UNDER GE DEHU ROAD
2024_MES_662685_1
8883
Open Tender
Civil Works
Item Rate
270 days
GE DEHU ROAD
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE DEHU ROAD
₹96,000
Yes
29 Nov 2024
28 Jun 2024
6 Sept 2024
28 Jun 2024
3 Sept 2024
12 Jul 2024
Amount
Taking down unserviceable any type of pole and Supply & erect in repair in position steel tubular pole swagged type as per IS 2713 complete with MS base plate finial tapper plug cap bolt, nut, screws etc all as specified for swaged pole of type 410 SP 31 , 09 mtrs long incl painting with two coats of aluminium paint over a coat of red oxide paint all as directed including removing existing pole.( Note :- Excavation and earth work and PCC in foundation shall be measured and paid separately) Make : Electrosteel/ Indian Pole/ Singh Profiles/ Kalki tubes & Poles
Taking down unserviceable any type of pole, supply & errection in repair in position steel tubular pole swagged type as per IS 2713 complete with MS base plate finial tapper plug cap bolt, nut, screws etc all as specified for swaged pole of type 410 SP 55 , 11 mtrs long incl painting with two coats of aluminium paint over a coat of red oxide paint all as directed including removing existing pole.( Note :- Excavation and earth work and PCC in foundation shall be measured and paid separately) Make : Electrosteel/ Indian Pole/ Singh Profiles/ Kalki tubes & Poles
M&L for earthing complete with galvanized steel pipe electrode,40mmbore,medium grade,2.5 Mtrers length,buried directly and preferably vertically in ground with top edge not less than 1.25 meters below ground leavle cinnected with earthing lead of 4mm dia galvanised iron or steel wire all as shwn in Plate no-2 to the earthing test point all as specified and indicated including testing on completion.
Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead using galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion
Taking out LT Cable of any size(10 sqmm 2/4 core to 240 sqmm 3.5 core) for reuse or under Schedule of credit to contractor. Note:- Excavation is not included in quoted rate and will be measured & paid separately.
Supply ,laying ,commossionong,testing in repair UG cable 70 Sq mm x 3.5 core ,XLPE insulated screened PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with stranded aluminum conducter all as directed- Make :- Gloster/ Polycab/Vishal.
All as per item-6 here in before but size of cable 10 Sqmm x 2 Core all as directed.
All as per item no-6 here in before but size of cable 10 Sqmm x 4 Core all as directed.
All as per item no-6 here in before but size of cable 16 Sqmm x 2 Core all as directed.
All as per item no-6 here in before but size of cable 16 Sqmm x 4 Core all as directed.
All as per item no-6 here in before but size of cable 25 Sqmm x 4 Core all as directed.
All as per item no-6 here in before but size of cable 50 Sq mm x 3.5 core all as directed.
All as per item no-6 here in before but size of cable 95 sqmm X 3.5 core all as directed.
All as per item no-6 here in before but size of cable 120 sqmm X 3.5 core all as directed.
All as per item no-6 here in before but size of cable 240 sqmm X 3.5 core all as directed.
Relaying of LT Cable of any size as obtained from item no-5 as per site requirment and making connections as specified and directed. Note:- Excavation is not included in quoted rate and will be measured & paid separately.
Supply and laying GI tubing 50 mm dia light grade for cable protection all as directed..
Supply and laying GI tubing 80 mm dia light grade for cable protection all as directed.
Dismantling and taking down MS cross arms, bracing supports, clamps, back plates, hooks etc fabricated from structural steel section from dismantled/existing LT poles of any type or description complete all as specified and directed.
Fixing only MS cross arms, bracing supports, clamps, back plates, hooks etc fabricated from structural steel section from dismantled/existing LT poles of any type or description complete all as specified and directed.
M&L cross arms, bracing supports, clamps, back plates, hooks etc fabricated from structural steel section (MS channel, angle sections, flat, round or square bars ) for reqd sizes and shape including bolts nuts & washers welding bending cutting cold or hot drilling holes for inserting in any shape or size as indicated or directed complete incl painting ( one red oxide primer coat two coats of aluminium paint ) complete.
Supply and fix GI strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground all as directed.
Dismentling / Taking down old Aluminium conductor steel rainforced any type and size.
Supply, stringing, streaching and binding in replacement with insulator, ACSR conductor (Weasel /ferret/Mink) on HT/LT Poles including providing of necessary jumpers, connecting all existing incoming and out going connections etc all as specified & directed.
Re-Fixing/re-stringing Aluminium conductor steel rainforced of any type and size on existing steel tubular / PCC poles including winding, jumpering with alkathine pipe etc complete all as specified and as directed.
Dismantling and taking down insulators of any size from dismantled/existing LT poles of any type or description complete all as specified and directed.
M & L for LT insulator, PIN type 1100 volts as per IS 1445, grade of size 100mm height, 65mm dia, porcelain, vitreous, white or brown including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut including taking down existing unserviceable insulator all as directed. Make;- Elpro or equivalent.
Fixing only LT insulator, PIN type, 1100 volts grade of size 100mm height, 65mm dia, porcelain, vitreous, white or brown including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut including taking down existing unserviceable insulator all as directed. Make;- Elpro or equivalent.
Excavation in trenches Soft / loose soil not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed.
Excavation in trenches for errection of poles etc.,n. exc 1.5m wide, exc 1.5m and n. exc 3.0m in depth and getting out in soft / loose soil complete all as specified and directed.
Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed.
Demolition of PCC coping , base , etc any type any location all as directed.
M&L for provision of PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
M & L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth, platforms, pole coping etc., all as specified and as directed.
M & L for plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in plinth, platforms, pole coping etc., all as specified and as directed.
(4) All incomming & out going cable connected through new suitable size copper gland and aluminium lugs, nut & bots etc. (5) This item not include the cost of MCCBs & MCBs, This should be measured and paid as separate item remaining all accessories are included in this cost.
Supply and fixing MCCB 250 Amp, 4 pole, 415 V,with breaking capacity 25 KA ,as per Conforms to IS-13947-2 and IEC 60947-2.Make :Belno/havells/Legrand
Supply and fixing MCCB 200 Amp, 4 pole, 415 V,with breaking capacity 25 KA ,as per Conforms to IS-13947-2 and IEC 60947-2.Make :Belno/havells/Legrand
Supply and fixing MCCB 160 Amp, 4 pole, 415 V,with breaking capacity 16 KA ,as per Conforms to IS-13947-2 and IEC 60947-2.Make :Belno/havells/Legrand
Supply and fixing MCCB 100 Amp, 4 pole, 415 V,with breaking capacity 16 KA ,as per Conforms to IS-13947-2 and IEC 60947-2.Make :Belno/havells/Legrand
Supply and fixing MCCB 63 Amp, 4 pole, 415 V,with breaking capacity 10 . Make : Belno/havells/Legrand
Supply and fixing MCB 40 Amp, 2 pole, 220 V,with breaking capacity 10 KA . Make : Belno/havells/Legrand
M & L in repair HDPE DWC pipe 40 mm dia ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection all as directed. Make:-Infra/Supreme/Prince
M & L in repair HDPE DWC pipe 50 mm dia ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection all as directed. Make:-Infra/Supreme/Prince
M & L in repair HDPE DWC pipe 80 mm dia ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection all as directed. Make:-Infra/Supreme/Prince
Supply installation fabricated MS ring suitable for fixing six number flood light on top portion of MS pole.Note:- The rate including the fixing arrangement of light fitting complete all as directed.
Taking down the unserviceable light fitting any type, supply and fixing Flood light(SMD Type) 120 watt with high pressure die cast housing with IP66,surge protection light netural warm white, all as directed. make:Benlo,Havells, Philips
Supply and fix in replacement of fibre looping box with connector and MCB SP 2 to 6 Amps of size 250x200x100 mm including making connections all as specified and directed by Engineer –in –Charge.Make - United / National / Sintex
S&F in repair Smart Integrated Solar All In One with 40 Watt power Rating, MPPT Charge Controller, Tiltable LED panel,Including Lithinim battery Adjustable AIO mounting angle, Mono Crystalline Solar Panel, PIR motion Sensor, easy to install all as per directed MAKE :- Benlo Crompton,Philips
S&F in repair Smart Integrated Solar All In One with 60 Watt power Rating, MPPT Charge Controller, Tiltable LED panel,Including Lithinim battery Adjustable AIO mounting angle, Mono Crystalline Solar Panel, PIR motion Sensor, easy to install all as per directed MAKE :- Benlo Crompton,Philips
Supply & fix cable jointing kit of cable 10 to 16 sqmm, 1100V XLPE grade cable for straight through Heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable complete all as specified and directed.. Make :- M-Seal/ Densons/ Dowells
All as item no-52 here in before but size of cable 25 to 30 sqmm,3.5/4 core
All as item no-52 here in before but size of cable 70 to 95 sqmm,3.5/4 core
All as item no-52 here in before but size of cable 120 to 240 sqmm,3.5/4 core
Taking down unserviceable street light fitting and supply and fixing LED SMD Type street light fittings 60W 3000K with DPD energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with necessary Bracket 50 mmGI Pipe with extended arm ,with Clamp ,nut& Bolts complet all as directe.Make: Benlo,Havells,Philips
Taking down unserviceable street light fitting and supply and fixing LED SMD Type street light fittings 90W 3000K with DPD energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with necessary Bracket 50 mmGI Pipe with extended arm ,with Clamp ,nut& Bolts complet all as directe.Make: Benlo,Havells,Philips
Taking down unserviceable street light fitting and supply and fixing LED SMD Type street light fittings 120W 3000K with DPD energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with necessary Bracket 50 mmGI Pipe with extended arm ,with Clamp ,nut& Bolts complet all as directe.Make: Benlo,Havells,Philips
Supply only PVC insulated and unsheathed cable of size 1.5 Sqmm single core multistranded copper conductor FR cable 1100 V grade confirming to IS 694.Make :Poly cab,Plaza
Taking down unserviceable Aluminium cable lug 120/95/240 sqmm and supply with fixing the same all as directed.Make:-Dewel,M-Seal
Taking down unserviceable Aluminium cable lug 50/70 sqmm and supply with fixing the same all as directed.Make:-Dewel,M-Seal
Taking down unserviceable Aluminium cable lug 25/35 sqmm and supply with fixing the same all as directed.Make:-Dewel,M-Seal
Taking down unserviceable Aluminium cable lug 16/10 sqmm and supply with fixing the same all as directed.Make:-Dewel,M-Seal
Supply and installed outdoor main control feeder pillar box cannopy type with IP-55 protection,fabricated with 3.15 mm sheet with 40mm angle iron fram, suitable for installed arrangement 100/160 Amps MCCB as incommer,out going 63/40 MCCB/ MCB SP&N=04 Nos with copper busbar made with 30mmx6mm copper strip on distribution board having front opening with proper locking arrangement size of the panel 600mm width,650mm hight and 275 mm width, complete all as specified and directed. Note: (a) MCCB/MCB will measure in respective items of schele "A".(b) Rate included the Copper bus bar.
Shri Sai Electricals (BID ID -3079321)
Om Sai Enterprises (BID ID -3067033)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .