Renovation of the building for Adarsh Nivashi School (Girls) at Jhagadia Ta. Jhagadia Dist. Bharuch

Name of Work :- Renovation of the building for Adarsh Nivashi School (Girls)

at Jhagadia Ta. Jhagadia Dist. Bharuch

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

1 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 1.00 No. 182.94

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift. (i) Not exceeding

2 Demolition of Brick work and stone masonry including stacking of 15.00 Sq.m. 536.09

serviceable materials and disposal of unserviceable materials with all

lead and lift. (ii) In Cement Mortar.

3 Dismentaling tiled of stone floors laid in mortar including stacking of 118.00 Sq.m. 46.77

serviceable materials and disposal of unserviceable materials with all

lead and lift..

4 Dismantling steel work including distempering and stacking the 339.00 Kg. 3.67

materials with all lead and lift.

5 Constructing drinking / Handwash Platform of 18 mm thick polished 5.00 Sq.m. 14064.28

black Granite having 0.45 m width and 0.60m height including 0.60m

support at every 0.7 m c/c with cementing materials / adhesive

including making necessary grooves in walls including bib tap, dedo

tiles including polyamide braided connection pipe 12mm dia., 450mm

length with all fitting inlet and outlet connection and all required fitting

accessories etc. with all labour material of approved quality including

full moulded round front edge granite strip of one side polished and

jointed with grey cement slurry including rubbing and polishing etc.

complete for all floors.

6 Providing and fixing double leaf cupboard shutters fabricated from MS 113.00 Sq.m. 1753.36

angle 25 x 25 x 3 mm as perimeter frame and 1.00 mm thick mild steel

sheet welded on both sides as face panel including necessary

stiffeners where required, complete with 6 nos. steel hinges, 1 no.

cupboard type mortice lock set, 2 nos. tower bolts, 2 nos. handles and

all necessary screws and hardware. All steel surfaces to be cleaned,

applied with one coat of red oxide zinc chrome primer and two coats of

synthetic enamel paint of approved shade including cost of materials,

labour, welding, grinding, fitting in position, finishing and all incidental

charges, complete as per drawings and direction of Engineer in

7 Providing laying and jointing in true line and level I.S.I. mark 25mm dia. 30.00 Rmt. 91.84

U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials

8 Providing laying and jointing in true line and level I.S.I. mark 15mm dia. 30.00 Rmt. 72.65

U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials

9 Providing and fixing pillar tap, capstan head, screw down high pressure 20.00 No. 308.73

with screws, shanks and back nuts. (i) 15mm dia. as directed by

Engineer in charge.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

10 Removing dry or oil bound distemper by a washing and scraping and 81.00 Sq.m. 12.58

sand papering the wall surface smooth including necessary repairs to

scratches complete.

11 Applying two coats of putty & two coats of primer of approved brand 81.00 Sq.m. 40.59

and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

12 Wall painting two coats with plastic emulsion paint of approved brand 59.00 Sq.m. 78.90

and manufacture on undecorated surfaces to give an even shade

including thoroughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth.

13 Wall painting two coats with plastic emulsion paint of approved brand 22.00 Sq.m. 84.16

and manufacture on undecorated ceiling surfaces to give an even

shade including thoroughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

14 Providing and laying coloured glazed tiles of the size 300mm x 200mm 14.00 Sq.m. 1417.36

x 8 mm / 300mm x 450mm x 8mm thick in skirting, risers of steps and

dedo on 10 mm thick cement plaster 1:3 (1 cement : 3 coarse sand)

jointed with white cement slurry.

15 Providing and laying 24" x 24" vitrified 8 mm thick tile flooring over 20 89.00 Sq.m. 1397.83

mm (average) base of cement mortar 1:6 (1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color cement

slurry including finished with flush pointing & cleaning the surface etc.

complete for anti skid.

16 Providing and laying polished kota stone slab flooring over 20mm 22.00 Sq.m. 976.72

(average) thick base of cement mortar 1:6 (1-cement : 6 coarse sand)

or L.M. 1.1.5 (1-Lime putty : 1.5 - coarse sand) laid over and jointed

with grey cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm thick.

17 Providing and laying Vitrified tiles 8 to 10 mm thick, in skirting risers of 8.00 Sq.m. 1538.85

steps and dedo on 10mm thick cement plaster 1:3 (1 cement :

coarse sand) and jointed with white cement slurry.

18 Removing, Repairing and Refixing old existing wooden door shutter 90.00 Sq.m. 928.19

including repairing the shutter / frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures like

3 hinges, 1 stoppers 20cm, 1 Aldrop 24cm, 2 handle 10cm, 1 Tadi

cm etc. applying primer coat + painting one coat of wood as directed by

engineer in charge etc. complete.

19 Providing and fixing mirror polished 18 mm thick Green Marble stone 35.00 Sq.m. 2903.75

with full round edge and polished of approved quality in cladding on sill

and around the doors / windows / ventilation with 12 mm thick cement

plaster C.M. (1:4) and fixing with cement slurry & adhesive including

moulding of exposed edges as directed by engineering in charge etc.

20 Providing and fixing 35 mm thick shutters for Doors, windows and 14.00 Sq.m. 5338.30

clerestory windows including Indian teak wood frames 10 cm x 7 cm.

size including black enameled iron oxidized fixtures and fastening

including primer coat of approved quality and two coats of oil painting

etc. complete. (ii) Fully Paneled.

21 Providing and laying brick work using common burnt clay building 15.00 Cum. 4051.78

conventional type bricks having crushing strength not less than

Kg./Sq.cm. in foundation and plinth in cement mortar 1:5 (1 cement :

fine sand) including the cost of all materials and labour charges etc.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

22 Providing 20 mm. thick sand faced cement plaster on wall up to height 148.00 Sq.m. 329.29

10 meters above ground level consisting of 12mm thick backing coat of

C.M. 1:3 (1 cement : 3 sand) and 8 mm thick finishing coat of C.M. 1:1

(1 cement : 1 sand) etc. complete.

23 Finishing wall with weather proof exterior emulsion paint on wall 148.00 Sq.m. 114.53

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials etc. complete.

24 Providing and fixing of Ridge flashing for roof panel shall be made out 66.00 Sq.m. 858.67

of 0.5 mm thick pre coated GI sheet. The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per IS:277:1992, 5-7

microns epoxy primer on both side of the sheet and polyester top coat

15-18 micron. The PPGI Sheet shall have plastic protective guard film

of minimum 25 microns to avoid scratches during transportation. The

ridge shall be fixed to the steel members by pop rivet or self drilling /

self stitching fastners @ maximum 450 mm c/c along length of capping

/ flashing etc complete.

25 Providing and fixing Safety grills of required pattern for windows / door 7029.00 Kg. 106.05

using necessary M.S. angle / M.S. pipe, M.S. flats and other structural

steel at required spacing including cutting, welding and fabrication etc.

including one coat of primer of approved quality and two coats of oil

painting as per detail drawing etc. complete.

26 Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall 9.00 Sq.m. 1441.90

roofing sheet fixed with hilti screw and rubber silicon sealer and

alluminium strip of size 50 x 3 mm etc. complete as directed by

Engineer in charge.

27 Steel work, welded in built up sections framed work including cutting, 270.00 Kg. 90.48

hoisting, fixing in position and applying a priming coat of read lead

paint. (A) In beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and cross beams. Hip and

jack rafters, purlins connected to common rafters and the like.

28 Clearing and grubbing road land including uprooting rank vegetation 8.00 Hect. 80243.80

grass bushes, shrubs, sapling and trees girth up to 300 mm removal of

stumps of trees cut earlier and disposal of unserviceable materials (A)

By manual means in area of light jungle.

29 Excavation for foundation upto 1.50 mt depth including sorting out and 2007.00 Cum. 117.08

stacking of useful materials and disposing the excavated stuff for all

lead and lift for all sorts of soil.

30 Providing and laying cement concrete work 1:2:4 (1- Cement : 2- 72.00 Cum. 3481.28

Coarse sand : 4- graded stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork and reinforcement for

reinforced concrete work in foundations, footings, base or columns and

31 Providing and laying controlled cement concrete M-250 and curing 370.00 Cum. 4805.58

complete including cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Foundations, footings

and mass concrete.

32 Providing and laying controlled cement concrete M-250 and curing 61.00 Cum. 5646.91

complete including cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Plinth and Ground

33 Providing ISI mark T.M.T. Fe-500D bar reinforcement for RCC work 55380.00 Kg. 76.21

including bending and placing in position complete up to all floor level.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

34 Providing & laying 300mm thick pucca rubble pitching in cement mortar 5280.00 Sq.m. 847.36

1:5 proportion with the surface pointed with cement mortar of 1:3

proportion including curing etc. complete for all lead and lifts for Canal

on / off condition & difficulty in transportation.

35 Providing and laying with G.S. wire mesh with standard size of mesh 5280.00 Sq.m. 328.25

and guage to carries the tension of rubble and fixing the mesh with

proper portion and anti corrosion materials or coating the same all

respect to fixing completed.

36 Providing and laying with Geo Fabric filter (GWF-50-300 category) over 5280.00 Sq.m. 70.33

the excavated surface as per specification including stitching with

overlap to design profile as per directed in tidal range etc. complete.

Rs. One Crore Fifty Seven Lakhs, Fifty Eight Thousand Four Hundred Sixty One and Eighty One Paisa

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a

change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of

original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as directed

and to be approved from the Engineer in charge.

6. Credit for dismantalled materials of amount of Rs. 13510.15 must be recovered from 1st R.A. bill of

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

City (R & B) Sub Division, Bharuch (R & B) Division, Bharuch (R & B) Division,

Bharuch Bharuch Bharuch