Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹10.4 L
EMD Value
₹20,778
Closing Date
21 Nov 2026, 11:00 am4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE/MED
Office of the Executive Engineer Metropolitan Electrical Division Block-DF, Sector-I, 4th Floor, Jalasampad Bhawan, Salt Lake City, Kolkata -700091
Supply, installation, testing and commissioning of Public address system at Control room of Newly renovated bungalow at FF Block Sech Abasan, Salt Lake city, Kol - 700106.
2026_IWD_5084684_4
WBIW/EE/MED/e-NIT-25/2026-27
Open Tender
Electrical Work/ Equipment
Percentage
30 days
FF BLOCK SALT LAKE
Please refer Tender documents.
6 documents required · 6 mandatory
₹20,778
7 Nov 2026
7 Nov 2026
21 Nov 2026
7 Nov 2026
21 Nov 2026
7 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Gooseneck Mic pre-polarized condenser gooseneck microphone with overall length of 450mm or better, with XLR3M-type connector, shall offer radio frequency interference (RFI) shielding against intermodulation from wireless equipment or devices, cardioid microphone capsule with uniform 120° angle of acceptance (-3dB) or better, frequency response of 50 Hz to 20,000 Hz or better and sound input levels handling capability of minimum 130 dBspl or better, nominal equivalent noise level of 26 Dba or better and output shall be low impedance balanced (<100 ohms) with current consumption shall be 3 mA
( 2 Nos at Control room) | 2 | Nos | 27,978.7 | ₹55,957.4 |
| 2 | Mic Base - Wireless-Digital Wireless Tablestand compatibility with all XLR-3 gooseneck microphones; Dynamic Range: > 120 dB (A) or better; SNR: > 88 dB(A) or better; RF Sensitivity: < -90 dBm or better; THD: 0.1% or better; Frequency Response: 85 Hz to 20KHz; ; Power Consumption: 380 mA or less; Battery Operating Time: 8h or more.
( 2 Nos at Control room) | 2 | Nos | 87,498.38 | ₹1,74,996.76 |
| 3 | Wireless Reciever - Two channel receiver for Digital Wireless Microphone, The device can be operated with a single network cable; Automatic Gain Control; Automatic Frequency management; AES 256 encryption; Latency 25 ms or less, Minimum 2-port Dante, PoE, Analog Mix Output
( 1 No at Control room) | 1 | No | 1,47,029.98 | ₹1,47,029.98 |
| 4 | Wireless Charging Base- Wireless microphone charging dock station from the same make as microphone .
(1 No at Control room) | 1 | No | 36,954.14 | ₹36,954.14 |
| 5 | DSP-Quarter rack 1RU mainframe with eight userconfigured card slots, and built-in 4x4 I/O of Dante network audio. Integrated license-activated AEC. Dual core processing 40-bit floating DSP.Powered using PoE or included external power supply. Surface mount bracket included.4ch Mic/Line input with selectable mic, line, mic gain, and phantom power per input. 32-bit analog to digital converters.4ch Line output. 32-bit digital to analog converters. 2ch input + 2ch output USB audio.Software license activated AEC. 8ch of AEC @ 250ms delay / 16ch @ 100ms.
( 1 Nos at Control room) | 1 | No | 4,16,612.76 | ₹4,16,612.76 |
| 6 | Ceiling/ wall mount Speaker - Wired2-Way In-Ceiling Speaker. Should have Woofer - 6 inch, and Tweeter 0.79 inch. Should have Frequency Range: 65 Hz to 20 kHz (-10 dB) .Should have Frequency Response: 95 Hz to 15 kHz (±3 dB) .Should support Transformer Taps 7.5W/15W/30W at 70V, 100V .Should have Sensitivity: 91 dB @ 1W/1m. Should have 50 Watts program power handling. Should have 110° conical coverage. Should be UL 94V-0 flame rated. Compliance: UL 1480, UL 2043, CE, FCC
(2 Nos at Control room) | 2 | Nos | 28,039.48 | ₹56,078.96 |
| 7 | Amplifier - Class D
Should be able to output 4-channel (75W /channel) or 3-channel (75W-75W-150W) or 2-channel (150W/channel) or 1 channel up to 300 W ,Should be able to configure on Lo-Z, Hi-Z operation. Should have Frequency Response 20 Hz to 20 kHz ±0.5 dB at 1 W. Should have S/N Ratio >103 dBA, 20 Hz to 20 kHz. Should have THD+N <0.1% at 1 kHz./ Should have protection against overheating, excessive input, overloaded speaker lines. Should be Energy Star certified. Should automatically go on standby when no signal is detected. Should have 1x control/connection port to enable/disable standby mode. Compliance: UL, CE, FCC, RoHS/WEEE.
( 1 Nos at Control room) | 1 | No | 1,42,986.21 | ₹1,42,986.21 |
| 8 | Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required.
6U Rack
(1 No at Conference room) | 1 | No | 8,269.9 | ₹8,269.9 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.92 MB
Tendernotice_2.pdf
PDF • 0.44 MB
BOQ_5205981.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .