Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.8 LAccepted-AOC 9 SHUBHASH BHAWAN RAJENDAR MARG MOUNT ABU 307 501 | MOUNT ABU | SIROHI | RAJASTHAN | 307501 | L1 | Accepted-AOC ACCEPTED BEING LOWEST QUOTED | |
| 2 | L2₹31.1 L+₹1.0 L (3.32%)Rejected-AOC | L2 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED | |
| 3 | L3₹31.8 L+₹1.7 L (5.76%)Rejected-AOC | L3 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
Tender Value
Refer Docs
EMD Value
₹58,000
Closing Date
5 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY GANDHINAGAR
GE GANDHINAGAR PO BSF CAMPUS GANDHINAGAR 382045
SPL REPAIR TO BLDG NO P 228 AND PROVN OF TWO SANITARY BLOCKS AT MIL STN GANDHINAGAR
2022_MES_541709_2
GE(A)/GNR/TOKEN/44 of 2022-23
Open Tender
Civil Works
Item Rate
90 days
MIL STN GANDHINAGAR
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
Yes
GE ARMY GANDHINAGAR
₹58,000
Yes
29 Oct 2022
17 Aug 2022
7 Sept 2022
17 Aug 2022
5 Sept 2022
24 Aug 2022
Amount
Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil complete all as specified and directed.
Excavation over area not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil.
Excavation over area exc 1.50 mtr but not exceeding 3.0 mtr depth for foundation, etc., and getting out in soft/ loose soil.
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil complete all as specified and directed.
Returning filling in foundation including spreading, watring and well ramming in layer n.exc 25cm each in loose/soft soil complete all as specified and directed.
Spreading and levelling under floor layers not exceeding 25 cm thick and well ramming including watering as required complete all as specified and directed.
M&L of sand cushioning for interlocking paver block complete all as directed
Removing excavated material exc 250m and depositing where directed at a level n exc 500 m above the starting point in soil complete all as specified and directed.
Removing rubbish to a distance exc. 1.5 Km but not exc. 5.0 Km out side MD land complete all as specified and directed.
M&L for loose filling with broken bats aggregates of gauge 40 to 80 mm in soakage pits, soakage wells
M&L, Hardcore of broken stone of gauge n exc 63mm deposited, spreaded & levelled in layers n exc 15cm thick including watering and ramming etc complete.
Supply only, liquid water proofing compound mixed as per manufacturer instructon mixed in cement concreter or cement mortar complete all as specified and directed.
M&L PCC 1:4:8 type D-2 (40mm graded aggregate) in foundation, sub base, filling and mass concrete.
M&L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in surface channel and drains, etc.
M&L Cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping , hold fast block etc complete all as specified and directed.
M&L precast curve stone of cement concrete type C-1 (1:3:6) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar (1:4) complete
M& L providing precast cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in landing / cover slab etc setting in CM 1:6
M&L RCC 1:2:4 (using 20 mm graded granite stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the like.
M&L design mix RCC M-25 grade concrete in foundation including raft,footing foundations beem ,plinth beams base for coloumn etc complete all as specified and directed.
M&L design mix RCC M-25 (using 20 mm graded granite stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the like.
M&L design mix RCC M-25 in lintel beams/lintels, roof beams over 1.50 mtr spancomplete all as specified and directed.
M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
M&L Brickwork, with old size subclass ‘B’ bricks in one brick thick honey comb work, built in CM (1:4) complete all as specified and directed
M&L for fly ash Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for fly ash Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
Cutting chases, for water tubing or concealed , etc, and making good to facings where required and plastering in cement mortar (1:4) cutting not exceeding 10cm girth in brick walls.
Taking down steel window/ventilator including grills of any description, n. exc 1.5 Sqm each complete all as specified and directed.
S&F, powder coated Aluminium windows/ ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- sheet glass, wire cloth, shall be measured and paid seperately.
M&L for cutting holes into or through brick walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4, type B-l as required, superficial area not exceeding 150 sq. cm including necessary scaffolding, if required complete all as specified and directed.
M&L 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
Rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and directed.
Form work to sides of concrete foundations footing bases of coloumn raft and raft beams sides and soffits of plinth beams and similar works vertical or to batter complete all as specified and directed.
Rough finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exce 200 mm thick.
Form work to sides of lintel beams and roof beams hunching griders braessummers lintel vantilivers etc.
Rough finished flat Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide
S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.
S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.
S&F, 35 mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.
S&F, 35 mm thick 2nd class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 12 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part -I), Klin seasoned and chemically treated and complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.
Taking down old shutters of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed.
Resecuring or easing & adusting without taking down of shutters exc 1.0 Sqm and n.exc 2.0sqm and adjusting with out taking down
S&F, stainless steel butt hinges of size 100mm complete all as specified and directed.
S&F, butt hinges, medium weight, cold rolled, mild steel of size 75mm complete all as specified and directed.
S & F in repair 125 mm aluminium anodised hasp and staple complete all as specified and directed.
S&F Brass knob fancy type 35-40mm dia complete all as specified and directed.
S&F,in repair stainless steel, tubular towel rail 20mm dia, D type, 600mm long complete all as specified and directed.
Supply & fixing 100 mm long Butt hinges, extrucded aluminium alloy with brass/bronze hinge pin, anodised type B-21 , bright polished type B-11.
S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed
S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.
S&F, butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.
S&F Mild steel pressed handles,oval type stove enamelled black of size 125mm complete all as specified and directed.
S&F, Mild steel barrel tower bolts, stove enameled black with bright bolt of 200 mm complete all as specified and directed.
S&F 250 mm long mild steel sliding door bolts, enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.
S&F extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed.
S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed
S&F, single action spring hinges (ISI MarK), mild steel with steel wire spring, stove enameled black, size of spring hinge 150mm all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor of 140mm complete all as specified and directed.
S&F in repair Mild steel barrel tower bolts, stove enameled black with bright bolt of 200 mm complete all as specified and directed.
S&F in repair Mild steel pressed handles,oval type stove enamelled black of size 125mm complete all as specified and directed.
S&F in repair 250 mm long mild steel sliding door bolts, enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.
S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor of 140mm complete all as specified and directed.
S&F, in repair, single action spring hinges (ISI MarK), mild steel with steel wire spring, stove enameled black, size of spring hinge 150mm all as specified and directed.
S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F, in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F, framed work such as grills, grating etc with ends of bars shoulderd or rivetted or forcged into spikes ,framed guard bars ,barred iron doors congirming to FE 290 Gde E-165 complete all as specified.
S&F, Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending, hooking etc and binding with MS wire 0.9mm dia(annealed).
S&F, mild steel TMT bar 8mm dia ,cut to length, bent to shape reqd including cranking, bending , hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia .
S&F, mild steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L Rolled mild steel sections conforming to Gde Fe-410-0 or Fe-310-0 as in framing for cladding, glazing and the like including door frames/ chowkats, coolerstand etc fixed with angle cleats and connecting plates, etc complete all specified and directed.
Removing existing water proffing /black top treatment from parapet wall, removing material to a distance exc. 1.5 Km but not exc. 5.0 KM out side MD land complete all as specified and directed.
S&F, in repair, pre-painted galvalume aluminium zinc coating GI based plain steel sheet, 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F, 18 to 19 mm thick Block board, grade-2 quality, interior grade, commercial types in cup board shutter and fixed to frame with screw and teak wood beading all around / exposed surfaces complete all as specifies and directed.
M&L for 40 mm thick (average consolidated thickness) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate, laid in slope 1:30 on roof as in padding, finished even and fair complete all as specified and directed.
M&L for rendering 10 mm thick on on fair faces of concrete surfaces as on PCC padding in CM 1:3 mixed with liquid water proofing compound as per manufacturer instruction and finish the surface even and smooth without using extra cement for laying APP membrane at non-accessible roof (mumty) all as directed. (Note :- water proofing compound shall be measured and paid sepretally).
M&L for water proofing treatment to non accessible roof slabs by applying one coat of cold bituminous primer @ 0.30 litre/sqm and conforming to IS-3384, laying APP based polyster modified membrane reinforced non wooven polyster of 3.50 Kg/Sqm (minimum), 3mm thick with plain polythene finished and sealing all the overlap 75mm in length side and 100mm in width side of membrane by torching including applying one coat of bituminous aluminium paint over membrane all as specified and directed .
M&L for water proofing of sunken portion consisting under mentioned items :- (i) 15 mm thick plastering in C:M 1:3 with liquid WPC (WPC included) at all around and base of sunken floor with proper slope. (ii) Applying a coat of bitminous primer @ 0.30 litre/sqm and conforming to IS-3384, laying APP based polyster modified membrane reinforced non wooven polyster of 3.50 Kg/Sqm (minimum), sealed by torching including demolition and removal of old concrete and provn of new lean cement concrete 1:5:10 type E 2 using 40 mm graded stone aggregate specified complete all as specified and directed.
M&L for machine cut kota stone slab 18-20mm thick as in flooring laid over and including cement mortar screed bed of 15mm thick in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for machine cut kota stone slab 18-20 mm thick as in riser of steps, skirting, dado and pillar laid over and including rendering 10mm thick in cement mortar (1:4), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L 75 mm thick cement concrete type D2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc complete all as specified and directed.
M&L for 100 mm thick PCC 1:4:8 type D-2( 40 mm graded stone aggregate ) as in sub base of flooring complete all as specified and directed.
M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed
M&L rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry over 20mm thick cement screed bed in cm 1:6 with grey cement and pigments in floors including taking down old tile complete all as specified and directed.
M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring finished fair and even to receive floor finishes complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.
M&L for cutting uneven surfaces of concrete & cutting reinforcement from drops of fins & facias (thickness not exceeding 50mm) using necessary scaffolding and making good the disturbed portion with 5mm thick rendering in CM 1:3 finished even and smooth without using extra cement etc. complete all as specifeid and directed.
M&L for non skid coloured tiles any colour 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm each in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for non skid coloured tiles any colour 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm as in vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match tiles, such as skirting/ dado over and including rendering 10 mm thick in CM (1:4) compelete.
M&L for glazed ceramic coloured tiles any coloured / shed of size 450mm x 300mm x 6 to 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.
Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for rendering cement plaster 5mm thick in cement mortar (1:3) on fair faces of stone / concrete in ceilings, chajjas, fins facia etc.complete all as specified and directed.
M&L for rendering cement plaster 10mm thick in cement mortar (1:6) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering cement plaster 12mm thick in cement mortar (1:4) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering cement plaster 5mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered ceiling surfaces including brooming down or steel wire brushging, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.
M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying three coats of white wash.
M&L for two coats of oil bound distemper over one coat of 1mm thick wall care putty ( Make : Birla/JK White) base on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.
M&L for complete removal of existing treatment (any no of layer) of wall and applying two coats of oil bound distemper over one coat of 1mm thick wall care putty (Make : Birla/JK White) base on old treated surface including preparation of surfaces complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered wall surfaces including brooming down or steel wire brushging, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.
S&F, 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n exceeding 0.5 Sqm in each pane
S&F, 4 mm thick, black tinted glass panes fixed to aluminium windows/vents with necessary rubber gaskets complete all as specified and directed.
S&F, 3 mm thick figured sheet glass, ordinary quality and glazing not exceeding 0.5 Sqm in each pane fixed complete all as specified and directed.
M&L for preparation of old painted wooden surface of any description, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
M&L for writing letters or figures (block, roman, Italic or Indian) not exc. 30cm high with synthetic enamel paint complete all as specified and directed.
Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.
Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.
Supply and laying of 20 mm outer dia CPVC pipe SDR 11 fitting on walls /ceiling or laying in floors including connection to old GI pipe if required complete all as specified and directed.
S&F of 20 mm outer dia CPVC elbow (3/4x 1/2) with brass thread at one end for fixing of taps etc and other end plain complete all as specified.
S&F of 20mm outer dia CPVC Tee with brass thread at one end for fixing of taps etc and other end plain complete all as specified.
S&F of 20 mm outer dia CPVC adopter with female brass thread at one end for fixing of taps etc and other end plain complete all as specified.
S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.
S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.
Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed.
Supply only 15 mm bore swan neck fancy type (long body) pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe.
S & F in chromium plated Stop Valves (Angle type) fancy type 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as directed.
S&F in repair Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 20 mm bore of pipe complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floor complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floor complete all as specified and directed.
S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including MS Z clamp complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including MS Z clamp complete all as specified and directed.
S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.
S&F, 75mm bore PVC (SWR) bend, any radius complete all as specified and directed.
S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.
S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.
S&F 110mm bore PVC (SWR) Tee equal or unequal any radius with access door complete all as specified and directed.
S&F, 110mm bore PVC vent cowl complete all as specified and directed.
Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 500 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including complete, all as specified and directed.
Supply, hoisting, fixing in position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top), ISI marked,including dismantling of old PVC/AC tanks of 500 litre capacity and fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed. Note- The water tank etc shall be contractor's supply.
S&F in rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with 20mm brass float valve complete all as specified and directed by Engr-in-charge.
S&F, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight -210 Gms)
S&F, in repair, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight -210 Gms)
S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms)
S&F in PVC connection of 15 mm bore and 450 mm long with brass checknut and union etc complete
M & L for PVC (SWR) multi floor trap diameter of outlet 75 mm with grating including jointing with solvent cement.
S&F in repair vitreous China squatting pan 'Orissa pattern' size 580x440 mm, white with integral foot rest including 'P' or 'S' trap front or back inlet excluding flushing cistern and flush pipe including connection to trap and flushing pipe etc and making good to floor complete all as specified and directed.
S&F, in repair kitchen sink with drainage board made of stainless steel 1mm thick including supply and fix 32mm CP waste coupling, plug, washer, 32 mm bore and 60cm long PVC waste pipe including cantilever brackets made of mild steel angle iron 30x30x4mm and flat iron 25x3mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall and making good disturbed portion in cement mortar 1:2 or in PCC 1:2:4, type B-1 using 20mm graded stone aggregate and connecting union to pipe, over all size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F, in repair, 0.63 mm thick, heavy duty stainless steel plate rack of size 39x36x10 inch complete all as specified and directed.
M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore.
M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed as specified.
Cutting into existing manhole150 dia for connection new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B2 using 40 mm graded stone aggregate, smooth finished and reforming benching as required all as directed.
S&F, in repair, vitreous china wash basin, white, flat back of size 450mm x 300mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.
Supply only pillar taps,15mm bore long body fancy type chromium plated complete all as specified and directed.
S&F, in repair, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed.
S & F in repairs chromium plated with long shank and cup (concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as directed.
S & F in repairs chromium plated Stop Valves (Angle type) fancy type 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as directed.
S & F in repair Bib taps long body cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete.
S & F Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete.
Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed.
S&F, gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe complete for 20mm bore complete all as specified and directed.
S&F, vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest including flushing cistern and flush pipe including connection to trap and flushing pipe etc and making good to floor complete all as specified and directed.
S&F, in repair, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed.
S&F, in vitreous China counter wash basin, oval type, flat back, 560 x 410 mm size, snow white, inserted in granite slab chromium plated waste pipe of suitable length including taking down existing wash basin complete.
S&F, in repair bathroom corner self super clean (transparent) unbreakable heavy duty set of 3 pieces (7",9" & 11") (As per sample)
S&F, in repair, plastic unbreakable heavy duty wall mounted square shelf tray of 450mm with decorative railing complete all as specified and directed.
S&F, in repair 25mm dia, 1mm wall thickness stainless steel fancy type heavy duty curtain rod with decorative ball type side brackets (as per sample) fix with wooden gutties complete all as specified and directed.
S&F, in repair, PVC (SWR) floor trap, with chromium plated grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.
S&F vitreous china bowl urinal flat back, of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
S&F, in repair, Soap dish, stainless steel, standard size Soap dish, any type, fixed to plugs with chromium plated brass screws complete.
S&F, Soap dish, stainless steel, standard size Soap dish, any type, fixed to plugs with chromium plated brass screws complete.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed
Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar for 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed.
S&F, in repair, 40mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.
S&F, 40mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.
Taking down carefully copper/aluminum point wiring (light, fan,socket or power) complete,including fixture and fitting such as as switches, ceiling roses, pendants, regulators, sockets,etc excluing light fittings etc,removing materials to store for keeping in safe custudy or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surface of walls, ceiling, floor etc to match with the existing surface complete all as specified and directed.
M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision sunken concealed terminal boxes complete all as specified and directed for the following :-
(a) One light/fan /Exhaust point controlled by one switch
(b) One multi purpose socket 5 Amps, Independent board.
(c) One multi purpose socket 5 Amps, on the same board.
(d) One bell buzzer point controlled by one push buttons independent.
M&L for wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC concealed conduit of 20mm bore fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box complete all as specified and directed.
S&F, lamp holder insulated body with back plate for battern fittings complete all as specified and directed.
S&F, in repair, switch piano, flush button single pole, one way 5 Amps complete all as specified and directed.
S&F, in repair, switch piano, flush button single pole, one way 15 Amps complete all as specified and directed.
S&F, in repair, bell push, flush type single pole, 5 Amps complete all as specified and directed.
M&L for bell electric, dingdong type AC 230 Volts, single pole complete all as specified and directed.
S&F, in repair, socket outlet multipurpose, 3 pin, 5 & 15 Amps flush type complete all as specified and directed.
S&F, in repair, socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and directed.
S&F, Ceiling rose, PVC/poly carbonate,isolated body three terminals,complete all as specified and directed.
S&F, in repair Distribution Board SPN 8 way, 240 volts, factory made powder coated, double door with neutral and earth link, suitable for fixing MCB,s complete including connecting all as specified and directed.
M&L for ceiling rose, PVC/poly carbonate, isolated body three terminals complete all as sepcified and directed.
S & F in repair MCB’s single pole, 6 to 32 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.
S & F in repair MCB’s SPN 40 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.
S&F, in repairs, LED light fitting, 1 x 20 watt 220V, AC, decorative box type with driver , holder , including LED tube light complete set flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.
M&L in replacement sub-main wiring with 2 single core 4 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in and including PVC concealed conduit and conduit assessories including drawing a run of PVC insulated, unsheathed, 650/1100Volts grade, copper conductor multi stranded 4 Sqmm size as continuous earth wire drawn through and connected to main switch/ DB and testing on completion. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length. (ii) Rates quoted shall be inclusive of cutting wall for concealing conduit and making good the same in cement mortar 1:3.
Supplying, installation, testing and commissioning, factory made, LT meter box, wall mounted board made out of CRCA sheet of 2 mm thick indoor type totally enclosed weather, dust and vermin proof with front opening hinged door and locking arrangement mounted on MS flat iron (40x6mm and 6" long) 04 No clamp welded to 40mm x 40mm x 6mm size angle iron frame alround panel panel body duly grouted on wall , 415 volts 3 phase, 4 wire AC 50 HZ having suitable aluminium bus bar for phase and the neutral insulated with PVC sleeves, space for fixing single phase KWH electric meter of suitable capacity 04 Nos, copper lugs, spacers, mounting channels, rubber gasket, locking knobs, hylam sheet pieces, PVC shrinkable sleeves, nuts and bolts, washers etc and suitable size single core copper wire connections, suitable compartments and epoxy powder spray paint with primer complete all as specified including the following accessories including taking down old u/s distribution board, taking down and refixing serviceable electric KWH meter in new panel (all as per sample):- INCOMING - (a) MCCB 415 Volt, 4 Pole, 25 KA Breaking capacity of 125 Amps - 01 No (b) R-Y-B phase LED indicating lamp - 03 Nos (c) 20A/4Amps HRC Control fuse with fuse link - 03 Nos (d) 200 Amp main Aluminium bus bar. multifunction meter with suitable CT. OUTGOING - (a) MCB, SPN, 63 Amp, 10 KA - 04 Nos (b) Space for mounting single phase energy meter-04 Nos (c) copper cable 10 sqmm wire and open terminals for all feeders Note (1) Mounting arrangement of panel included in quoted rate. (2) Qtr No to be mentioned in respective meter on acrylic plate & cost of acrylic plate to be included in quoted rate.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .