WORK OF LEG REPAIRING OF VARIOUS TOWERS AND REPLACEMENT OF NUT BOLTS OF LOC.NO. 98B OF 132 KV S/C GAJRAULA-GARH LINE UNDER ETD-AMROHA.

Amount

WORK OF LEG REPAIRING OF VARIOUS TOWERS & REPLACEMENT OF NUT-BOLTS OF LOC.NO. 98B OF 132 KV S/C GAJRAULA-GARH LINE UNDER ETD-AMROHA. (The M.S. Angle and nuts and bolts shall be given by the Deptt. Free of cost )

The Following works are to be carried out at 132 KV Gajraula-Garh Line Under ETD-Amroha. Digging the pit around the tower leg of the size 2x2x1M cut the copping with the help of chisel and hammer of leg upto 1.00 M depth. Clean the rusted leg with the help of emery paper/iron brush. Apply two coats of good quality red oxide primer at rusted portion. Make 12 Nos holes of 18mm dia (6 holes at bottom and 6 holes at top) of rusted portion in 90mm x 90mm x1M size angle with the help of gas cutter. Fixing additional galvanized angle with the help of nuts & bolts, also fill up mid portion by welding for strengthening the stub of tower. To build up copping of leg upto 30cm above ground level with 1:1:3 ratio cement and concrete.

Replacement of Complete rusted Nut & Bolts of following size of Loc. No. 98B of 132 KV Garh-Gajraula line by opening/cutting of old rusted Nut & bolts one by one with the help of chisel/hammer/gas cutter. 1. 16x40mm 2 16x45mm 3 16x50mm

TECHNO POWER ENGINEERS

NAVEEN AND COMPANY

RAHUL AGRAWAL