Loading…
Loading…
Tender ID
Tender Value
₹6.4 L
EMD Value
₹12,873
Closing Date
22 May 2026, 11:00 amClosed
E.O,R.S.M
RAJPUR SONARPUR MUNICIPALITY
The Shed for Fartabad Market near Fartabad More Ward No. - 29 under Rajpur-Sonarpur Municipality
2026_MAD_1024053_1
WBMAD/ULB/RSM/01/26-27
Open Tender
CIVIL WORKS
Percentage
60 days
RAJPUR SONARPUR MUNICIPALITY
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹12,873
15 May 2026
13 May 2026
25 May 2026
13 May 2026
22 May 2026
13 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.
a) In ground floor including roof. | 1 | cum | 447 | ₹446.55 |
| 2 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.
b) Extra rate for each addl. Floor over the rate of
ground floor. | - | cum | 497 | - |
| 3 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.
(a) Depth of excavation not exceeding 1,500 mm | 1 | cum | 119.27 | ₹119.15 |
| 4 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
(a) With earth obtained from excavation of foundation.
Pg.-1/It.-3.a | 1 | cum | 77.54 | ₹77.46 |
| 5 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.
The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in
finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.
i) For roof truss works
a) Span up to 12 Mtr
Pg.-101/It.-2A.i.a (3rd Corri. Pg.-85) | 1 | M.T | 72,316 | ₹72,243.68 |
| 6 | (b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
3.14x0.040=0.1256 M
Pg.-200/It.-1.a | - | sqm | 29 | - |
| 7 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc.including using of approved putty etc. on the surface, if necessary :
(b) On steel or other metal surface :
(iv) Two coats (with any shade except white)
Pg.-200/It.-2.b.iv | - | sqm | 79 | - |
| 8 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).
i) In Roof
a) With 0.5 mm thick sheet
It.-14, Pg.-82 | 1 | sqm | 787 | ₹786.21 |
| 9 | Supply of Unplasticized Non-Pressure Polyvinyle Chloride (PVC-U) Pipe & fittings for use in Underground drainage & sewerage system conforming to IS-15328-2003
A..iii. Single socketed 3 Meter length (SN8) with Rubber Ring type
c. 160 mm
S & P Works (3rd Corrigenda & Addenda), Pg.-1 It.-1 | - | Mtr. | 1,227 | - |
| 10 | Labour for fitting and fixing Unplasticized non pressure Poly Chloride (P.V.C- U) pipes for underground drainage and sewerage system (IS-15328:2003) including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials.)
iv. 160 mm
S & P Works (3rd Corrigenda & Addenda), Pg.-2 It.-2 | - | Mtr. | 93 | - |
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.43 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.74 MB
BOQ_2516798.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .