Providing to Street lights & High Mast on Sayan -Kadarma fourlane road At. Sayan Village Ta. Olpad, Dist. Surat

Providing to Street lights & High Mast on Sayan -Kadarma fourlane road At. Sayan Village

Ta. Olpad, Dist. Surat

DESCRIPTION TENDER RATE

Qnty. Unit Rate in Rate in Per Amount

1A 128 Mtrs. Providing and erecting Mains with ISI marked, 1.5KV grade 56.56 Rupees Fifty Mtr.

electrolyte multi stranded, annealed copper conductor with heat Six And Paise

resistant PVC insulated conforms to IS 694, IEC - 227 erected in Fifty Six Only

existing pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.(e) One wire

6.00 sq. mm (Make :- RR Kabel/ Polycab/ KEI/ Greatwhite/

Finolex/Havells)

1B 16 Mtrs. (g) One wire 16.00 sq. mm(Make :- RR Kabel/ Polycab/ KEI/ 142.41 Rupees One Mtr.

Greatwhite/ Finolex/Havells) Hundred Forty

2A 1104 Mtrs. Supplying and erecting Flexible PVC insulated multi strand multi 46.46 Rupees Forty Mtr.

core 1.1 kv grade ISI marked copper wires of following size to be Six And Paise

erected as directed. (e) 1.50 Sq.mm 3 core round PVC sheathed Forty Six Only

(Make :- RR Kabel/ Polycab/ KEI/ Greatwhite/

Finolex/Anchor/Havells/Apar)

2B 90 Mtrs. (k) 4.00Sq.mm 4 core round PVC sheathed (Make :- RR Kabel/ 176.75 Rupees One Mtr.

Polycab/ KEI/ Greatwhite/ Finolex/Havells) Hundred

3A 138 Nos. Supplying and erecting LED street light / Flood light fittings with 5976.17 Rupees Five Ea.

High power White LEDs wattage of 3 Watt and above assembled on Thousand Nine

single MCPCB, efficiency more than 130 lm/w and corrosion free Hundred

High pressure die cast aluminum housing with smooth finish Seventy Six

powder coated and heat sink extruded aluminium with diffuser and And Paise

Polycarbonate optics/ lenses, with toughened glass with company Seventeen Only

mark/name engraved or embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line supply

with over-voltage protection. (iii) Above 60 to 90 watts Cat-lll

(Make :- Havell's/ Philips/Crompton/ Jaquar/Luker/ Pyrotech)

3B 30 Nos. (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light 10818.11 Rupees Ten Ea.

must have 440VAC line supply with over-voltage protection. (vii) Thousand Eight

above 200 to 250 watts cat-III (Make :- Havell's/ Philips/Crompton/ Hundred

Jaquar/Luker/ Pyrotech) Eighteen And

4 1850 Mtr. Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable 140.39 Rupees One Mtr.

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on Hundred Forty

wall with necessary clamps or in existing trench / pipe of following And Paise

size of cables (C) 4 core 10 Sq. mm (Make :- RR Kabel/ Polycab/ Thirty Nine

KEI/ Greatwhite/ Finolex/Havells/Apar) Only

5 800 Mtr. Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 220.18 Rupees Two Mtr.

multistrand Aluminium conductor for 1.1 KV. to be laid on wall Hundred

with necessary clamps or in existing trench / pipe of following size Twenty And

of cables (B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) (Make Paise Eighteen

:- RR Kabel/ Polycab/ KEI/ Greatwhite/ Finolex/Havells/Apar) Only

6 6 Nos. Providing and, fixing heavy duty flange type brass double 75.75 Rupees Seventy Ea.

compression type cable gland with rubber ring for PVC insulated Five And Paise

armoured cable complete with out going tails, insulating tape etc for Seventy Five

following size of cables.(B) 3 & 1/2 core 35/50 Sq. mm Only

7 6 Nos. Solder less crimping type Aluminium lugs conforming to IS suitable 15.15 Rupees Fifteen Ea.

for cable of following size evenly crimped with high pressure tool & And Paise

connected to switchgear terminals with brass/cadmium plated nut Fifteen Only

bolts in an approved manner. (C) 16/25 Sq.mm.

7a 18 Nos. (D) 35/50 Sq.mm. 20.20 Rupees Twenty Ea.

8 2 Sq.M Providing & erecting weather proof, dust & vermin proof, floor 11466.53 Rupees Eleven Sq.

tr mounted front operated outdoor type double door cubical panel Thousand Four Mtr

board necessary IP-54 and above protection as per approval from Hundred Sixty

engineer incharge made from 14 SWG thick CRC M.S. sheet for Six And Paise

outer body & doors, 16 SWG thick CRC M.S.sheet for internal Fifty Three

partitions with necessary accesories , supporting angles/ flats Only

channel including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire /

copper-aluminium strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted with

epoxy powder coating. (The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper Aluminium strips,

meters, Fuses etc. The dimension shall be measured excluding base

beams) The panel shall be supplied with following approved

9 4 Nos. Supplying & erecting IP 55 grade following size section pillar 3595.60 Rupees Three Ea.

fabricated from joint less M.S. Sheet with angle iron legs made from Thousand Five

jointless M.S. Angle with cable clamps to be buried in ground to Hundred Ninety

have appropriate erection to work uniform until erected with cement Five And Paise

concrete foundation and 45 cm high bricks work finishing with Sixty Only

plaster etc. hinged double door internally supported on both side,

with internal and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded

and other with nut and bolt for erecting Bakelite sheet. Painting the

Section Pillar inside and out side with three tank powder coated

paint. section pillar roof should be without joint with water leakage

proof & tested as per IP 55 test & followed by IS 2147 of 1962 (B)

75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS Sheet

with angle iron legs 45 cm long made from 35 X 35 X 5 mm thick

10 4 Nos. Supplying and erecting HYLAM sheet on existing angle iron 1156.45 Rupees One Sq.

frame.for following thickness (C) 6mm Thousand One Mtr

Forty Five Only

11 2 Rn. Supplying and erecting triple pole & neutral 440V / 500V panel 1961.42 Rupees One Rn.

Mtr mounting Copper Busbars with four equal Nos. of electrolyte bus Thousand Nine Mtr

having current density not more than 1.6 Amp. / sq.mm (Rated Hundred Sixty

current / cross section area) duly wrapped with colour insulating One And Paise

tape for phase sequence of following current carrying capacity, Forty Two Only

erected with necessary bus bar supports /insulators, main cable

socket to each bar, erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

12 2 Nos. Supplying and erecting approved make panel mounting type Digital 1275.63 Rupees One Ea.

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range Thousand Two

erected on existing panel board with all connection, wiring etc .with Hundred

manufacturers calibration certificate. Seventy Five

And Paise Sixty

13 2 Nos. Supplying and erecting approved make panel mounting type Digital 1558.43 Rupees One Ea.

Ammeter having 3 digits LED display, external CT operated, Thousand Five

calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , Hundred Fifty

erected on existing panel board with all connection, wiring etc .with Eight And Paise

manufacturers calibration certificate. Forty Three

14 6 Nos. Providing & erecting L.T. Current Transformer with bar primary 274.72 Rupees Two Ea.

50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA box Hundred

duly secured with insulating materials connected to the meter Seventy Four

15 4 Nos. Supplying and erecting Ammeter / Voltmeter selector switch for 3 317.14 Rupees Three Ea.

phase AC Supply 500 V on existing panel board with necessary Hundred

connections. Seventeen And

16 155 Kg. Providing , erecting , fabricating the M.S. structure as per 77.77 Rupees Seventy Kg.

requirement on site incorporating proper size of M.S. Seven And

angles,square,round, flats, bars, channels, sections complete with Paise Seventy

cutting, welding, grinding & finishing duly painted with one coat of Seven Only

red oxide with erection on site as per direction of engineer in charge

with necessary grouting, cementing, plastering & finishing

17 6 Nos. Supplying and erecting approved make suitable panel indicator LED 43.43 Rupees Forty Ea.

type lamp, lens cover, complete erected with necessary connections. Three And

18 6 Nos. Supplying & erecting approved make Digital time switch having 3168.37 Rupees Three Ea.

lithium cell 6 years operative and operate battery backup 1 channel Thousand One

day clock with 14 memory programme, suitable to operate on 240V Hundred Sixty

+ 5%, 16A with, floating contacts Minimum switching setup time 1 Eight And Paise

minimum & LCD display. Also comprised permanent ON/OFF Thirty Seven

switching. Programming switches & housed in fire proof Only

thermoplastic enclosure & transparent cover erected as required with

necessary connection erected as directed.

19 6 Ea Supplying & erecting power contactor ,AC3 duty for time switch 2782.55 Rupees Two Ea

complete erected as per direction Cat III [D] 4 pole 440V 40 Amp. Thousand

And Paise Fifty

20 11 Nos. Providing & erecting 415V MCB Four Pole Switch for Lighting 638.32 Rupees Six Ea.

Load (B curve) having 10KA breaking capacity & confirms to IS Hundred Thirty

:8828 in existing box having following capacity (b)40 Amp. Cat.III Eight And Paise

(Make :- L&T/ABB/Siemens/C&S/Altech/Havells) Thirty Two

21 3 Nos. Providing and erecting Approved make Four pole moulded case 8055.76 Rupees Eight Ea.

circuit breaker having breaking capacity ICU of 35 KA. at 415 V. Thousand Fifty

having normal current rating 125A. with Fixed thermal & magnetic Five And Paise

release suitable to work on A.C.supply 50 c/s. with all internal Seventy Six

connections, spreader tinned copper & complete erected in existing Only

16 G.M.S. housing. ICS=100% of ICU only Cat III (Make :-

L&T/ABB/Siemens/C&S/Altech/Havells)

22 138 Nos. Providing and erecting Miniature circuit breaker single pole 0.5A to 270.68 Rupees Two Ea.

2A system and having breaking capacity 10 KA to be erected in Hundred

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III Seventy And

(Make :- L&T/ABB/Siemens/C&S/Altech/Havells) Paise Sixty

23 10 Nos. Supplying & erecting earth pit of minimum bore dia.150mm size 4591.46 Rupees Four Ea.

approved make Earthing Electrode consisting Pipe-in-Pipe Thousand Five

Technology as per IS 3043-1987 made of corrosion free hot dipped Hundred Ninety

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron One And Paise

galvanising, Inner pipe dia of 25 mm having 200-250 Micron Forty Six Only

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to 440V in

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

24 123 Kg. Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 77.77 Rupees Seventy Kg.

25 2120 Mtr. Providing & laying approved make Double walled corrugated pipes 62.62 Rupees Sixty Mtr.

(DWC) of polyethylene(conforming to IS 14930 II )with necessary Two And Paise

connecting accessories of same material at required depth in Sixty Two Only

existing trench for laying of cable. below ground / road surface for

enclosing cable (A)50 mm outer dia

26 190 Mtr. Providing & laying approved make ISI marked HDPE 6Kg / cm2 491.87 Rupees Four Mtr.

(Class-3) as per IS:4984:1995 PE-80 to be erected at road crossing Hundred Ninety

on or floor as directed for laying of cable. The pipes as following One And Paise

size of dia & weight per 6 mtr. (E) 90 mm inner Dia Eighty Seven

27 64 Nos. Supplying and erecting approved make Octagonal pole made from 11411.99 Rupees Eleven Ea.

HR sheet steel. The pole should be made as per IS. and shall be Thousand Four

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable Hundred Eleven

suspend local wind speed with integral Junction box consist of And Paise

terminal plate of min 6mm Hylam sheet, standard profile Ninety Nine

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and Only

arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer

considering site requirement. (E) 7 Mtr. Long 70 mm Top X

mm bottom dia, 3 mm thickness with 225mmX225mmX16mm base

plate, 4-M20 Bolts and 600mm long with necessary G.I. J Bolts

.Approx Pole weight 67 kg (Make :-

Transrail/Valmont/Bajaj/Jindal/Ambika)

28 54 Nos. Providing and erecting street light pole bracket comprising main B 829.21 Rupees Eight Ea.

Class GI pipe of 4.2 cm/require outside dia. complete with suitable Hundred

B Class G.I sleeve tubing of approx. 45cms.length and suitable for Twenty Nine

76.5 mm / 80mm. / require size pole top having sufficient fasteners And Paise

for fixing the brackets and having spread of 1 mtr. length with Twenty One

suitable rise as per site condition & suitable welded stiffener reducer Only

and nipple with check nut complete painted with one coat of Red

oxide / PU base primer and two coats of Aluminium / PU paint.

paint with following nos of arms. [B] Double Arm Bracket 1 Mtr

29 10 [C] Three Arm Bracket 1 Mtr 1045.35 Rupees One Ea.

30 3 Nos. Supplying, erecting, testing, commissioning approved make M.S. 184438.12 Rupees One Ea.

Polygonal High Mast Pole having following general Specification.(a) Lakh(s) Eighty

Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 & Four Thousand

Hot deep galvanized minimum 65/86 micron (as per IS 2629 /1985) Four Hundred

Lantern carriage with ring and rubber lines for erection of luminaries of Thirty Eight

suitable site.(b) Maximum telescopic section not more than four And Paise

(c) Double drum gear pipe motorized winch with 6mm dia S.S. Rod Twelve Only

(For 16 mtr and above size)

(d) Approved make L.E.D. aviation light = 1 No. Lightening arrestor =

No. with necessary wiring of 2.5 sq.mm 5 core ISI copper cable

(e) Bottom most section suitable for mounting reversible motor and

switchgears having door not more than 1400mm x 300mm with

waterproof gasket & hinges & locking arrangement.

(f) Pole structure comprises suitable size of reversible motor, cable and

necessary switchgears with control panel. (g) bottom section shall have

suitable size of thickness supports ribs foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS including testing &

commissioning of the entire structure for following size of High Mast

poles [4] High Mast 16 Mtr. TOP A/F 150 Mm, BOTTOM A/F 400 Mm,

31 2120 Mtr. Making trench in soft soil of suitable width of 90 cm deep for laying 55.55 Rupees Fifty Mtr.

cable or locating the fault all over the run and back filling the same Five And Paise

and making the surface as normal ground. Fifty Five Only

32 290 Mtr. Making trench in Hard Murrum / Tar Road of suitable width of 90 357.54 Rupees Three Mtr.

cm or required depth for laying any size of cable or locating the Hundred Fifty

fault all over the run and back filling the same and making the Seven And

surface as normal ground.(B) If additional machinery like hammer Paise Fifty Four

driller or JCB use [Add] Only

33 2 Nos. Providing and erecting Approved make Earth fault Relay suitable to 4687.41 Rupees Four Ea.

mount with inter connection suitable to following size of moulded Thousand Six

case circuit breaker having CT ratio & MCCB rating as following Hundred Eighty

along with shunt trip 220V AC. with all internal connections & Seven And

complete erected in existing M.S.housing.. (1) 15 A -100 A , CT Paise Forty One

Ratio 1/100 (Make :- L&T/ABB/Siemens/C&S/Altech/Havells) Only

34 32 Nos. Providing and erecting Pipe type earthing having 150 cms.long and 368.65 Rupees Three Ea.

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in Hundred Sixty

specially prepared earth pit complete with necessary 8 SWG earth Eight And Paise

wire. Sixty Five Only

35 32 Nos. For using salt and charcoal / coke as required for pipe type earthing. 171.70 Rupees One Ea.

36 140 Mtr. Supplying following size of Light duty “A” Class G.I . Pipe & 300.98 Rupees Three Mtr.

erecting as directed by Engineer-in-charge. (B) 50 mm dia Hundred And

37 100 Mtr. (D) 100 mm dia. 696.90 Rupees Six Mtr.

38 550 Mtr. Drilling the road without breaking the road surface (Asphalt) for 616.10 Rupees Six Mtr.

laying of cable for feeding power supply by making up to following Hundred

size of holes at both ends complete. (B) Up to 150 mm bore dia Sixteen And

I /We am / are willing to carry out the work at @________ % below_______________ ( & above/ below %)(Should be written in figures

and words) Below / Above the tender rates mentioned above amount of tender works out as under.

Estimated amount put to tender

Add: % Above Rs. Deduct: % below Rs.

Net Rs. Net Rs.

In words Rs. In words Rs.

(C) I /We here by declare that I /We have visited the site and fully requisited my self / ourselves with the local situation regarding materials labour

and other factors pertaining to work be fore submitting tender.

(D) I /we here by declare that / We have carefully studied the conditions of contracts detailed technical specification and other tender documents

of this work and agree to execute the same accordingly. .

Deputy Executive Engineer, Ex.Engineer

Electrical R & B sub-Division, Elec. (R&B) Division

(1)The rates are inclusive of all taxes, transport charges, storage Charges except GST and applicable GST Will be paid.

(2) The materials covered for wiring should be got approved from the Deputy Ex.Engr.In charge of the work.

(3) The materials and work shall have to be used and carried out as specified in technical note.

(4) All works Shall be Carried Out as per Public works Department hand book & Other Specification of the Division.or Directed.

(5) Rate are Inclusive of 1% Labour cess in Tender amount so 1% of total amount of bill will be deducated from the bill

(5) Rate are Inclusive of 1% Labour cess in Tender amount so 1% of total amount of bill will be deducated from the bill

(6) The Agency will have to Submit Certificate On Letter pad that cable used in the been used from ISI Certified cable drum as peer Note of

S.E.Electrical (R&B) Deptt.Gandhinagar's No.4211 Dtd.23.09.2008.

FOR DISMENTAL MATERIAL: 1) Dismantle Amount will Remain fix as per attached Document and will be Deduct from rate Quoted

FOR TESTING OF MATERIAL

(1) Meterial to be used in work should be got approved by in Charge E.E.

(2) Sample of Material to be Used in the Work is required to be tested at S.V.N.I.T Laboratory/or From the approved Govt. Research

Institute,which is must Sample required to be submit as per requirement of S.V.N.T. Laboratory,in case of Cable & Wire 3 Meters of Sample & for

Fluorescent Fitting 5 Nos of Ballst With 2 Nos fluorescent Lamp may be required for testing No Payment will be Made on Account of Sample

Meterial,So it is requested to tenders/agency consider cost of Sample Material Consideration While Quoting the Tender.Actule Paid by agency for

testing of Material Will be Paid by the Department.Agency is Requested to Contact S.V.N.T.Laoratory to Understand there requirement for testing

SIGNATURE OF CONTRACTOR