CO Fire Post Building including Site Development works at Baijanth Distt Kangra HP SH Provision of compound lighting water lifting pump

Amount

Sub Head- I (Compound Light)

SITC of LED street light luminaire in a single piece aluminium housing with reflectors & acrylic transparent cover suitable for 70 watt, minimum luminous efficacy 150 Lm/w (nominal o/p of each fitting) maintenance free system duly wired complete associated accessories suitable for operation on 230 volts, 50 Hz AC supply i/c connections etc. as reqd. (M/S Havells model ENDURACITYLINERNEOSL70WLED757PASYBOTG or equivalent similar superior make)

Supply of 4 Meters long Galvanised Octagonal pole with single arm bracket (Mayfair MF 32 or equivalent) of 1 Meter length & in built Junction box consisting bakelite sheet, 6amp SP MCB & 6 amp connector etc. for making connection with suitable size of copper wire in the box. Bottom and top diameter of the pole shall be 130mm & 60mm respectively with 3mm thickness and base plate of size 210mmX210mmX12mm and 4 nos. foundation bolts of 16mm dia X 450 mm length with nuts & washers etc. complete as required as per drawing attached. (M/s Mayfair or equivalent similar superior make)

Supply of 4 Meters long Galvanised Octagonal pole with Double arm bracket (Mayfair MF 32 or equivalent) of 1 Meter length at 90 degree & in built Junction box consisting bakelite sheet, 6amp SP MCB & 6 amp connector etc. for making connection with suitable size of copper wire in the box. Bottom and top diameter of the pole shall be 130mm & 60mm respectively with 3mm thickness and base plate of size 210mmX210mmX12mm and 4 nos. foundation bolts of 16mm dia X 450 mm length with nuts & washers etc. complete as required as per drawing attached. (M/s Mayfair or equivalent similar superior make)

Erection of the above street light pole on RCC foundation i/c making the 1:2:4 RCC foundation of size 400mm X 400mm and height of 1000mm below ground level and 300mm above ground level i/c supplying and fixing of Raft, Verticals & Ring TOR rods, making Raft of size 900mmX900mm with 1:4:8 PCC & fixing of anchor bolts, plastering the exposed surface etc. complete as required as per drawing attached.

Supplying and drawing 3 core 1 sqmm PVC insulated PVC seathed copper conductor cable with relevent IS specification for looping between Junction box to Fitting as required.

Supplying and embedding 32mm dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

Providing and fixing Energy efficient, with IP65 Protection,25 W,6500K, LEDs Post Top Lantern ,for symmetrical light distribution , with spun aluminium landscape and with high power LED ,suitable for installation on pole of Dia up to 70mm i/c connection with 1.5sqmm copper conductor FRLS PVC cable testing commissioning etc complete as required at site. (Havells CORALPT25WLED757PSYMTOPC or equivalent similar superior make)

SITC of digital Street Light Panel suitable for three phase 440 volt 50 Hz AC supply having maximum load capacity 6.0 KW consisting digital timer for 24 hours, 32 A TP Contractor & 40 Amp. Rating TPN MCB i/c internal connection complete as required at site. ( M/s Havells Model No IHXTS03060 or equivalent similar superior make.)

Sub Head- II (Pump and associate work )

SITC OF ONE No 3 HP rating Heavy Duty Regenerative Self Priming Monobloc pumping set on common base with totally enclosed fan cooled motor with capacitor start & run eliminating centrifugal switch suitable for operation on 440 Volt , Three phase, 50Hz A/C supply capable of discharging about 11700-960 LPH against the head of 9 to 45 Mts and suitable for (40x40) mm size suction and discharge line connection I/c providing suitable arrangement for priming of pump installation the same of existing cement concrete foundation testing commissioning etc as reqd at site (Make: Crompton greaves DMB30 or SS Make)

Providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, set etc including form work etc as required.

Supplying one no 40 mm size, Bronze metal ,Non Return Valve (NRV) ( Horizontal type ) including fixing the same making testing etc as reqd.

Supplying one no 40 mm size, Bronze metal ,Full way Gate Valve including fixing the same making testing etc as reqd.

Supplying one no 40 mm size, Bronze metal ,Foot Valve ( vertical type) including fixing the same making testing etc as reqd.

Pdg and fixing of 40mm medium class GI Pipes making connection using required size Elbow,Tee,sockets, union I/c supplying of above mentioned accessories cutting and threading of pipe and plumbing work etc as reqd at site

SUB HEAD-III (Supplying and Laying Cables)

Supplying and Laying Cables) Supplying of following sizes XLPE insulated PVC inner sheathed Copper/Aluminium conductor Armoured /un-Armoured cable of 650/1100V grade conforming to IS: 7098(Part 1) 1988 WITH UPTO DATE AMENDMENTS etc. as required.

3x10 sqmm Aluminium Conductor Armoured Cable

4x16 Sq.mm Aluminium Conductor Armoured Cable

2 core 1.5 Sq.mm. Cu. Condr. Armoured cable

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3 X 10 sq. mm (22mm)

4x16 Sq.mm ( 28 mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Up to 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Up to 35 sq. mm (clamped with 1mm thick saddle)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Up to 35 sq. mm

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

S/F Angle iron Frame combination of following size of angle I/c cutting, welding & painting complete as per requirement at site.

40 mm x40 mmx3mm thick angle iron frame.

25 mm x5 mm Thick Flat angle iron

Supplying and layingo f 1/4" thick electric rubber insulating mat in front of panel complete as reqd (ISI MARK)

RR ELECTRIC CO.