EOR of Addition/alteration/renovation of LED lights in Central Police Control Room, PHQ, IP Estate, Delhi.

Amount

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. a) Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire.

b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire.

c) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying, installation, testing & commissioning of energy efficient recessed mounted type 34W to 38W full window glare free opal diffuser LED panel luminaries of size 595mm x 595mm (nominal size) suitable for both Armstrong/POP/Geypsum Board or grid false ceiling fabricated with MS powder coated white CRCA housing including mounting with the help of chain/other suitable method, hanging from the ceiling including connections with 3 x 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. The Total system Lumen of 34W to 38W LED should be 3600 with minimum system efficacy of 100 lumen /watt colour temperature 5500K to 6500K, power factor>0.95, CRI (Ra)>75, THD <10%, with APFC driver having driver efficiency >85%, operating voltage 150-270 volts with minimum 2.5KV surge protection. The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab. The LED chip should be of Cree, Nichia, Philips Lumiled, Osram.

Supplying, installation, testing & commissioning of energy efficient surface mounted type 34W to 38W full window glare free opal diffuser LED panel luminaries of size 595mm x 595mm (nominal size) suitable for both Armstrong/POP/Geypsum Board or grid false ceiling fabricated with MS powder coated white CRCA housing including mounting with the help of chain/other suitable method, hanging from the ceiling including connections with 3 x 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. The Total system Lumen of 34W to 38W LED should be 3600 with minimum system efficacy of 100 lumen /watt colour temperature 5500K to 6500K, power factor>0.95, CRI (Ra)>75, THD <10%, with APFC driver having driver efficiency >85%, operating voltage 150-270 volts with minimum 2.5KV surge protection. The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab. The LED chip should be of Cree, Nichia, Philips Lumiled, Osram.

Supplying and installing of following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. a) 450 mm width X 50 mm depth X 2.0 mm thickness

Supplying and Replacement of following burnt out/damaged accessories on existing panel board/DB including dismantling, testing and commissioning etc as required. a) 32 Ampers TPN MCB

b) 32 Ampers DP MCB

Supplying, laying and fixing of following sizes PVC insulated and PVC sheathed armoured aluminum conductor power cable of 1.1 KV grade alongwith with 6 SWG GI wire on recess etc. as required. a) 4 X 25 sq. mm

b) 4 X 50 sq. mm

Providing and fixing of following rating and breaking capacity and pole MCCB with thermo magnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required alongwith less credit for dismantled MCCB under buy back arrangement. a) 100 Ampers, 16 KA, breaking capacity TPMCCB (Icu = 100% Ics)

b) 125 Ampers, 16 KA, breaking capacity TPMCCB (Icu = 100% Ics)

c) 250 Ampers, 25 KA, breaking capacity TPMCCB (Icu = 100% Ics)

Supplying and fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 12 way, Double door

Supplying, installation, testing & commissioning of energy efficient 1400 mm sweep size ceiling fan including wiring the down rod of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable including providing and fixing of phenolic laminated sheet cover on fan box etc as required.

Supplying, Installation, Testing and Commissioning of wall fan 400 mm sweep size, oscillating type having plastic blade complete with all accessories such as front jali and including connections etc as required.

Supplying, installation, testing & commissioning of energy efficient following capacity Split type Air Conditioner unit suitable for operation on 230 Volts, 50Hz, single phase capable of performing Cooling, Dehumidifying, Air Circulating & Filtering complete connection with upto 4 meters length refrigerant copper pipe heavy gauge 2"/8" / 3"/8" & 5/8" covered with minimum 10mm thickness insulation including 3 x 2.5 sq.mm flexible copper conductor wire wrapped in flexible pipe and also providing 25mm diameter PVC drain connection including accessories, fixing on surface with clamp to the nearest drain connection pipe complete with repairing of wall with minor civil work at site etc as required. a) Minimum 2.0 TR Capacity

Supplying and fixing of Digital display wall mounting type Servo Voltage Stabilizer of following capacity for 2 TR capacity Air-Conditioner complete etc as required. (Input 145-280 volts) (Output 195-245 volts) (a) 5 KVA

Providing & Laying of refrigerant copper piping of size 5/8” & 1/4” diameter from indoor unit to outdoor unit of split type Air Conditioner unit along with 4 core 2.5 sq.mm PVC insulated and PVC sheathed flexible copper conductor cable including 20 mm size of cotton thread ribbed PVC flexible pipe from drip tray of Air Conditioner unit to drain pipe along with necessary support complete etc as required. (Measurement to be done for quantity after 4 meters, which is included in item no -13)

Providing and fixing of 20mm diameter PVC Heavy duty pipe for sweating water dragged in the existing split type A.C. unit with clamp etc. complete as required.

Providing and fixing of heavy duty portable powder coated stand for fixing the outdoor unit on the surface of wall etc. complete as required.

Supplying, installation, testing & commissioning of following capacity Window type Air-Conditioner unit suitable for operation on 230 Volts, 50Hz, single phase capable of performing Cooling, Dehumidifying, Air Circulating & Filtering complete connection including accessories, fixing on window including wooden work (fixing plywood of appropriate size) repairing of wall/window with minor civil work at site etc as required. a) Minimum 1.5 TR Capacity

Less Credit for following old/damaged accessories after dismantling the same under buy back arrangement etc as required. i) 2 x 40 watts/1 x 40 watts/4 x 14 watts/2 x 28 watts Flourosent tubular luminaries.

ii) Panel board/ DB alongwith accessories

iii) ceiling fan/ wall fan

iv ) STAC/WTAC

M/s Rahul Associates

M/s Bhagwat Associates