Loading
Loading…
Loading…
| Sl No | Description | Qty | Unit | Hakkeem N L1 | RASHEED L2 |
|---|---|---|---|---|---|
| 1.00Vennur DWS | |||||
| 1.00 | OD527974/2025-2026:Site Investigation Charges | 1 | no | 1,762 ₹1,762 Lowest | 1,935 ₹1,935 |
| 1.00 | OD527977/2025-2026: Digging bore well of dia 150 mm ( 6 inches) including all charges for conveying ,drilling machine ,hire charges and all labour charges etc complete 100 m drilling | 130 | metre | 546 ₹70,980 Lowest | 590 ₹76,700 |
| 1.00 | OD527978/2025-2026::Providing casing pipe 180mm dia including all charges etc compleate | 15 | metre | 592 ₹8,880 Lowest | 650 ₹9,750 |
| 1.00 | OD527975/2025-2026: Supplying 180mm well cap | 1 | no | 182 ₹182 Lowest | 200 ₹200 |
| 1.00 | OD527976/2025-2026:Yield Test Charges | 1 | no | 7,051 ₹7,051 Lowest | 7,740 ₹7,740 |
| 1.01 | OD528035/2025-2026:Engaging labour for taking out motor pump, cleaning and refixing | 20 | Day | 985 ₹19,700 Lowest | 1,000 ₹20,000 |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 19.2 | kg | 170 ₹3,264 | 167 ₹3,206.4 Lowest |
| 1.01 | OD528040/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. | 4.8 | sqm | 565 ₹2,712 | 530 ₹2,544 Lowest |
| 1.01 | OD528115/2025-2026:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 90 mm dia 10Kgf/cm2 | 230 | metre | 576 ₹1,32,480 Lowest | 580 ₹1,33,400 |
Tender Value
₹2.7 L
EMD Value
₹6,846
Closing Date
21 May 2026, 6:00 pmClosed
Assistant Engineer
Office of Assistant Engineer LID EW Section Pazhayannur
Annual Plan-Pazhayannur GP - Pazhayannur DWS maintenance (Proj. no. 347/2025-26)
2026_LSGD_850857_8
01/2026/AE/LIDEW/PZR
Open Tender
Civil Works - Water Works
Item Rate
365 days
Pazhayannur
Please refer Tender documents.
7 documents required · 7 mandatory
₹605
Yes
₹6,846
Yes
9 Jul 2026
14 May 2026
23 May 2026
14 May 2026
21 May 2026
14 May 2026
14 May 2026 - 21 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Vennur DWS | |||||
| 1.001 | OD527974/2025-2026:Site Investigation Charges | - | no | - | - |
| 1.002 | OD527977/2025-2026: Digging bore well of dia 150 mm ( 6 inches) including all charges for conveying ,drilling machine ,hire charges and all labour charges etc complete 100 m drilling | - | metre | - | - |
| 1.003 | OD527978/2025-2026::Providing casing pipe 180mm dia including all charges etc compleate | - | metre | - | - |
| 1.004 | OD527975/2025-2026: Supplying 180mm well cap | - | no | - | - |
| 1.005 | OD527976/2025-2026:Yield Test Charges | - | no | - | - |
| 1.006 | OD528035/2025-2026:Engaging labour for taking out motor pump, cleaning and refixing | - | Day | - | - |
| 1.007 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1 | kg | - | - |
| 1.008 | OD528040/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. | 1 | sqm | - | - |
| 1.009 | OD528115/2025-2026:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 90 mm dia 10Kgf/cm2 | - | metre | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1437773.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.03 MB
BOQ_1437773.xls
BOQ • 0.30 MB
sb.pdf
Tender Documents • 1.81 MB
af.pdf
Tender Documents • 0.01 MB
fot.pdf
Tender Documents • 0.01 MB
ip.pdf
Tender Documents • 0.01 MB
p.pdf
Tender Documents • 0.02 MB
ep.pdf
Tender Documents • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .