Loading
Loading…
Loading…
Tender ID
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.4 LAccepted-AOC | 1 | Accepted-AOC Agreement executed on 23/02/2026 | |
| 2 | 2₹3.6 L+₹23,722.42 (7.00%)Rejected-AOC JARATHA CORNER LAKSHAM VEEDU COLONY ROAD | THENI | TAMIL NADU | 625203 | 2 | Rejected-AOC Higher rate and hence not admitted |
| Sl No | Description | Qty | Unit | A I Viswanathan L1 | RadhaKrishnan V K L2 |
|---|---|---|---|---|---|
| 1.00maintenance | |||||
| 1.00 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 2.09 | cum | 7,713.54 ₹16,105.87 Lowest | 8,253.49 ₹17,233.29 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 522.88 | kg | 194.27 ₹1,01,579.31 Lowest | 207.87 ₹1,08,690.44 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 392.16 | kg | 187.05 ₹73,353.15 Lowest | 200.14 ₹78,486.5 |
| 1.00 | OD406442/2025-2026:Providing and fixing precolated galvanised iron profile sheet (size,shape,and pitch of corrugation as approved by Engineer in charge )0.35mm(+0.05%) total coated thickness with zinc coating 120grams per sqmas per IS 277 in 240mpasteel grade 5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.The sheet should have a protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer in charge .The sheet shall be fixed using self drilling self tapping screws of size (5.5x55mm)with EPDM seal,complete upto any pitch in horizontal /vertical or curved surfaces,excluding the cost of purlins raftersand trussesd and including cuttingti size and shape wherever required(Modified data 51.20) | 130.72 | sqm | 621.1 ₹81,189.57 Lowest | 664.58 ₹86,873.23 |
| 1.00 | OD407191/2025-2026:Providing and fixing on Eave face UPVC Half cut Rain water gutters pipes (150mm 4kg/cm2) with all necessary fittings, with clamps at 1M intervel (12.41.2 modified) | 22 | metre | 508.76 ₹11,192.72 Lowest | 544.37 ₹11,976.14 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 33.5 | metre | 565.05 ₹18,929.18 Lowest | 604.6 ₹20,254.1 |
| 1.01 | OD398266/2025-2026:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement with ntesting of joints including cost of specials etc as per direction of Engineer in charge. | 20 | metre | 205.53 ₹4,110.6 Lowest | 219.92 ₹4,398.4 |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.11 | cum | 9,235.97 ₹1,034.43 Lowest | 9,882.49 ₹1,106.84 |
| 1.01 | 10.25.1:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete | 244.8 | kg | 128.24 ₹31,393.15 Lowest | 137.22 ₹33,591.46 |
Tender Value
₹3.4 L
EMD Value
₹8,472
Closing Date
5 Feb 2026, 3:00 pmClosed
AE PUTHENCHIRA GP
Office of the Assistant Engineer, LID EW Section, Puthenchira Grama Panchayat
Annual Plan-99/25-26-Panchayath shopping complex maintenance-General Civil Work-puthenchira GP Ward -14
2026_LSGD_831332_2
10/2026/AE/LID EW/PCA
Open Tender
Civil Works - Buildings
Item Rate
120 days
PUTHENCHIRA GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹750
Yes
₹8,472
Yes
2 Mar 2026
28 Jan 2026
6 Feb 2026
28 Jan 2026
5 Feb 2026
28 Jan 2026
maintenance
50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD406442/2025-2026:Providing and fixing precolated galvanised iron profile sheet (size,shape,and pitch of corrugation as approved by Engineer in charge )0.35mm(+0.05%) total coated thickness with zinc coating 120grams per sqmas per IS 277 in 240mpasteel grade 5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.The sheet should have a protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer in charge .The sheet shall be fixed using self drilling self tapping screws of size (5.5x55mm)with EPDM seal,complete upto any pitch in horizontal /vertical or curved surfaces,excluding the cost of purlins raftersand trussesd and including cuttingti size and shape wherever required(Modified data 51.20)
OD407191/2025-2026:Providing and fixing on Eave face UPVC Half cut Rain water gutters pipes (150mm 4kg/cm2) with all necessary fittings, with clamps at 1M intervel (12.41.2 modified)
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
OD398266/2025-2026:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement with ntesting of joints including cost of specials etc as per direction of Engineer in charge.
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
10.25.1:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1396910.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.28 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
BOQ_1396910.xls
BOQ • 0.30 MB
PA.pdf
Tender Documents • 0.26 MB
SBDNIT.pdf
Tender Documents • 1.95 MB
FOT.pdf
Tender Documents • 0.26 MB
AF.pdf
Tender Documents • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .