Lawn Tennis Court

Removal of Exsisting Acylic: Verification of exsisting slopes and creating standard slope as per the requirement. (if required additional WMM will be supplied to maintain the slope). "Cleaning of WMM base (by air blower or Wire Brushing) before starting Asphalting Layers)

Providing and applying Primer Coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at 2 the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 MORD (for use on Wet mix macadam & WBM) etc., complete as per S.S. and as per directions of the departmental authorities. (Low porosity)

Providing and applying Tack Coat with bitumen emulsion using emulsion pressure 3 distributor at the rate of 0.20 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per Tech. specification No 503 MORTH.

Providing and laying Bituminous Macadam with 100-120 ΤΡΗ / 40-60 TPH hot mix plant producing an average output of 75 tonnes/37.50 t per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, 4 laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction as per Tech, specification No. 504 MORTH etc., complete in all respects for finished item of work as per directions of the departmental authorities

Providing and laying Semi Dense Bituminous Concrete with 100-120 TPH batch type hot mix plant producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent 5 of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 508 complete in all respects

Acrylic 8 Layer: Supply and installation of ITF certified 8 layers acrylic system with thickness is 3 to 3.5 mm. The flooring should be certified by International Tennis Federation (ITF) and should have application as first layer of Resurfacer having consumption ratio of 0.035 kg/sqft, Filling and smoothing asphalt or concrete surfaces in preparation for tennis court system. And also fills the surface chips, voids and conceals repairs while providing a smooth surface for color coating. Then 2 layers of Dense cushion layer second and third layer of consumption ratio 0.035 kg/sft.then 3 fine cushion layers -fourth, fifth and sixth of consumption ratio-0.035kg/sft. 2 layer of color coat- seventh and eighth layer (colour coat for the finished surface to protect from UV. It should have consumption ratio of 0.025 kg/sft). On top of these 8 layers, the line marking should be done with Overline paint (It should have consumption ratio of 4 kg/court). The acrylic resurfacer must have silica sand infill to be embedded into it with consumption ratio of 0.065 kg/sqft.It should have the Technical data of Consistency - Thick liquid, Court Pace Rating -39 Medium, COR-0.81, COF-0.61, Ecology- VOC free, made of water based, Solvent -free & recycled material, Durability- Resilient Base (Recotable Surface), Impact resistance-2.0mm, Heat Ageing- Zero Detoriation, Artificial Weathering- QC Passed, Surface Grip- Adheres, UV - UV resistant, Colour- Avialable in various different colors, Density- Approx

Providing and fixing Tennis Pole fixed model, Made of 80mm x 80mm MS pipe with 7 special internal ratchet system for tightening of rope, the ratchet enables perfect tension control of the net, Epoxy painted, Approx 30 Kgs each pair, with branded Garware Net, colour Black for net with Green for Tennis Post

Providing and constructing Tennis Practice Wall of required height 10ft, Length 70ft and width of 6 inches, comprising RCC/reinforced masonry construction with suitable foundation, smooth impact-resistant sports surface finish, exterior-grade coating and tennis practice line markings, complete with reinforcement, plastering, finishing, painting and all necessary works as per approved drawings and specifications.

Supply and installtion of the chainlink mesh of 50mm*50mm*2.5mm at the enterance gate along with 50mm*50mm pipes

Exisiting drain repair and installation of the open sorcer drain with a width of 6inches ineer to inner and preparing the drain required slope

Providing and fixing UV-stabilized HDPE/PE sports mesh cloth/netting of suitable GSM and mesh size, designed for outdoor sports applications, including necessary GI/SS fixing accessories, clamps, ropes, eyelets and tensioning arrangements. The mesh shall be weather-resistant, UV-resistant, durable and securely fixed to the supporting structure, complete in all respects as per approved drawings and specifications.

Supply and installation of a professional-grade Tennis Chair Umpire Chair suitable for outdoor tennis courts and tournament use. The chair shall be manufactured from heavy-duty, corrosion-resistant aluminium alloy sections, suitably reinforced for stability and long service life. The complete structure shall be weatherproof and finished with UV-resistant polyester powder coating suitable for outdoor exposure. The chair shall have an elevated umpire seat at approximately 2.10 m above finished court level, in line with commonly used ITF tournament chair dimensions. ITF guidance recommends a chair height between 1.83 m and 2.44 m.

Supply and installation of manual tennis court scoreboard, suitable for outdoor tennis court use, comprising a weather-resistant aluminium/PVC or equivalent rigid frame with high-visibility manual flip/rotating number cards for displaying Player/Team 13 Names, Games and Sets. The scoreboard shall be designed for clear visibility from both sides of the court and shall be suitable for fence or tennis-post mounting.Approximate size: 600 mm (W) x 800 mm (H), or equivalent approved size. Commercial manual models are available around this dimension

Supply and installation of heavy-duty outdoor tennis player chair with ergonomic seat, backrest and armrests, fabricated from corrosion-resistant aluminium alloy with UV-resistant powder-coated finish, non-marking rubber feet, complete with all fittings and accessories.

Supply and transportation of......... LED Flood light Luminaire made of pressure diecast aluminum housing with powder coated, having protective toughened glass, supply Input voltage 120-270 V AC, P.F > 0.90, high power LEDs, with a System Efficacy >=120 lumens/watt and junction temperature < 70°C, with ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-5), IK05, driver surge protection 4KV, In-house additional surge protection ≥ 10KV with wide/narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%.. CCT: 3000K-5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.