D.G. Set Related Electric Work and MGPS for 58 Beds at District Hospital Paota Jodhpur

Amount

SITC of MGPS of medically grade as per BSEN-13348 with third party certification from Lloyds/TUV degreased [ie free from oil, grease and particulate matters) seamless copper pipe confirming to ASTM B88 and all copper joining done by brazing with AWSA5.8, classification BCuP-S or BS 1845 following procedure in accordance with ASTM B828 after purging with nitrogen. All pipe cutting shall be carried out with a radial pipe cutter and copper pipe fitting's shall comply with B4 alloy designation. Adequate support shall be provided while laying pipeline testing shall be done at 17 bar and after testing pipe shall be painted with two coat of enamel paint as per colour codification as per ISO 7396-Part- I 2016. All as pre approved by Engineer in Charge. For additional technical parameters of products/ work, refer Annexure "A" attached with P.W.D. Electrical B.S.R. 2021

SITC of non lubricated ball type GM Isolation Valve with adapter & PTFE Seat having quarter turn handle opening of following sizes suitable for flow capacity 1500 LPM at 4.7 bar with maximum allowable pressure of 30 bar and suitable for working temperature ranging - 20°C to L30°C.Valve should be CE approved/ CE certified. All as pre approved by Engineer in Charge. For additional technical parameters of products/ work, refer Annexure "A" attached with P.W.D. Electrical B.S.R. 2021

For 12 MM OD pipe

For 15 MM OD pipe

SITC of Gas outlet points (AR-4), (AR-7) and Vaccum (8.7 psig) for dispensing medical gases (oxygen/air/Vaccum) at point of use confirming to BSEN ISO 9170-1:2008. The gas outlet are quick connect type it should have colorc oding for different gas source and should accept only respective adapters as required. All as pre approved by Engineer in Charge. For additional technical parameters of products/ work, refer Annexure "A" attached with P.W.D. Electrical B.S.R. 2021

SITC of BPC (back pressure compensated) flow meter with humidifer made of nickel plated body double jacketed with flow gradations marked on it. Desired flow will be setteled through rotary knob. Flow range should be between 0 to 15 lpm & work should be executed as per direction of engineer in charge. All as pre approved by Engineer in Charge. For additional technical parameters of products/ work, refer Annexure "A" attached with P.W.D. Electrical B.S.R. 2021

SITC of Valve box made of CRCA sheet duly powder coated with transparent window which is installed in the MGPS for oxygen and vaccum line and should comply with ENISO5211:2001 complete with ball type valves and gauses as required for oxygen compressed air and vaccum line (three gas). All as pre approved by Engineer in Charge. For additional technical parameters of products/ work, refer Annexure "A" attached with P.W.D. Electrical B.S.R. 2021

For Three gas

SITC of microprocessor based auto alarm system (digital type) suitable for medical gas service provided with audible and visual alarm for MGPS Zoning. It should monitors the current status of oxygen/compressed air pressure in distribution pipeline of central medical supply system and trigger the alarm to alert. The system qhqUld comply BSEN ISO: 7396-1 :2007. All as pre approved by Engineer in Charge. For additional technical parameters of products/ work, refer Annexure "A" attached with P.W.D. Electrical B.S.R. 2021

For Two Gas Services

M.R. Engg. Works Pvt. Ltd

SUNRISE MEDICARE