CONSTRUCTION OF CENTRAL MEDICAL STORE AT COVERD PARTY PLOT STAGE PORTION OF EXISTING MULTILEVEL PARKING AT TP-04 (ASHVINIKUMAR-NAVAGAAM), FP-M/5 PAIKEE IN EAST ZONE-A(VARACHHA) ZONE-A, SURAT.

NAME OF WORK : CONSTRUCTION OF CENTRAL MEDICAL STORE AT COVERD PARTY PLOT STAGE PORTION OF EXISTING MULTILEVEL PARKING AT TP-04 (ASHVINIKUMAR-NAVAGAAM), FP-M/5 PAIKEE IN

EAST ZONE-A(VARACHHA) ZONE-A, SURAT.

NOTICE NO. - DMC(D)/ EZ-A/20/2025-2026

SR. NO. DESCRIPTION QTY UNIT AMOUNT

PART (A) - CIVIL WORKS

WORK UP TO PLINTH LEVEL

Excavation for foundation includ.sorting out & stacking of useful materials & disposing of the excavated stuff upto

mt. Lead & all lift, watering etc.Comp.

(A) Loose or Soft soil Executed With Mechanised Efforts / Machinaries

SMC SOR-PAGE NO 1 IT NO

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal ofthe surplus excavated soil as directed

within a lead of 50 M. For following diameter of piles.

250mm dia 0.00 Rmt 326.84

SMC SOR ITEM NO. 94, PG.NO.

Providing and filling rubbles including hand packing and filling interstices with quarry spalls behind abutments and

between returns as directed.

SMC SOR , ITEM NO. 22, PG. NO. 3 3.50 C.M. 1064.80

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg 20m.m Nominal size)&curing comp. excl.

cost of form work in :(a) foundation & Plinth

(A) Foundation 1.50 C.M. 3005.76

(C) Grade Slab 0.00 C.M. 3005.76

SMC SOR, PAGE NO 1 IT NO

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone agg. 20 mm nominal size)& curing comp.

5 Includ.cost of form work but exclu. Cost of reinforcement for reinforced concrete work in : (A) Foundation, footing,

Base of columns and Mass concrete

(C) Grade slab 0.00 C.M. 3637.34

SMC SOR, PAGE NO 09 IT NO

Providing, mixing, placing, compacting by machine vibrator, curing, testing M20 Design mix concrete as per IS

6 456:2000 (latest revision) and as per tender specification in all items including cost of form work and rendering but

excluding cost of reinforcement

(A) foundation, footing, base of columns and mass concrete 4.80 C.M. 3918.70

SMC SOR, PAGE NO 14 DESIGN MIX M20

Providing, mixing, placing, compacting by machine vibrator, curing, testing M20 Design mix concrete as per IS

7 456:2000 (latest revision) and as per tender specification in all items including cost of form work and rendering but

excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12550.27

(2) Having cross sectional area more than 0.085 sq. mt .up to 0.12 sqmt. 0.00 C.M. 11099.15

(3) Having cross sectional area more than 0.12 sq. mt. 1.60 C.M. 9153.32

SMC SOR, PAGE NO 14 DESIGN MIX M20

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 8957.39

(2) Having cros sectional area more than 0.08 sq. mt and upto 0.12 sq.mt. 0.00 C.M. 8038.38

(3) Having cross sectional area more than 0.12 sq. mt . 3.70 C.M. 6961.62

SMC SOR, PAGE NO 14 DESIGN MIX M20

(E) RCC Wall - 200 mm Thick 4.40 C.M. 8191.72

SMC SOR, PAGE NO 14 DESIGN MIX M20

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work incl. bending, binding & placing in position

Upto G.L./P.L. 1834.00 Kg. 76.21

SMC SOR, PAGE NO 1 IT NO

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in Cement

Mortar 1:6 (1- Cement : 6 -fine sand) (C) Fly Ash Bricks

SMC SOR, PAGE NO 2 IT NO 16 3.70 C.M. 4511.97

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

SMC SOR, PAGE NO 1 IT NO 10 44.50 C.M. 130.39

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete.

SMC SOR, PAGE NO 1 IT NO 11 6.90 C.M. 289.06

Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite

control treatment including labour and material consistment with ISI specification. Using Chlordene and Chiorpurfiles

12 20 EC. As per 6131_paret-II Consentration Weight one percent is recommended i.e. one litre 20 EC chemical emulsion 10.60 S.M. 82.89

with 19 liter give 1% concrentration inclusive of one litre chemical emulsion appication at the rate of 5 litre chemical /

Sqm of surface is recommended as per IS.

SMC SOR, PAGE NO 12 IT NO

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar surfaces at all floor levels consisting of

mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1 cement: 1 sand)

apply thick cement slurry and apply roller horizontal as well as vartical ( two times ) up to good quality and size of

grain in elevation as per directed by engineer incharge.

SMC SOR, PAGE NO 3 IT NO 28 MR 12.00 S.M 324.00

Providing & applying two coats of weather shield max paint (3 coats may be required in case of darker colours.) of

ICI Dulux or Apex Ultima of Asian Paint including applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc. complete and as directed by the architects and manufacturers.

Surface Preparation : surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking

paint. This can be achieved by brushing with a wire/ stiff coir brush, followed by water jetting if required. Fill up all

minor cracks and defects with white cement and sand mixture in the ratio 1:3. For application on previously painted

wall, previous coatings of paint must be thoroughly scraped off and Clean the surface thoroughly using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours. Application of putty is not

recommended. Minimum 4-6 hours duration is required between each coat of weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 MR 10.00 S.M 82.00

TOTAL COST UP TO PLINTH

WORK ABOVE PLINTH

Providing, mixing, placing, compacting by machine vibrator, curing, testing M20 Design mix concrete as per IS

15 456:2000 (latest revision) and as per tender specification in all items including cost of form work and rendering but

excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 12550.27

First Floor 0.00 C.M. 12589.87

Terrace Floor 0.00 C.M. 12629.47

(2) Having cross sectional area more than 0.085 sq. mt .up to 0.12 sqmt.

Ground Floor 0.00 C.M. 11099.15

Terrace Floor 0.00 C.M. 11138.75

At Staircabin Top 0.00 C.M. 11178.35

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 1.20 C.M. 9153.32

First Floor 1.20 C.M. 9192.92

Terrace Floor 1.20 C.M. 9232.52

At Staircabin Top 0.00 C.M. 9272.12

(SOR SMC Pg No. 14 Design Mix M20)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 C.M. 8957.39

First Floor 0.00 C.M. 8996.99

(2) Having cros sectional area more than 0.08 sq. mt and upto 0.12 sq.mt.

Ground Floor 0.00 C.M. 8038.38

First Floor 0.00 C.M. 8077.98

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 28.10 C.M. 6961.62

First Floor 2.40 C.M. 7001.22

Terrace Floor 2.40 C.M. 7040.82

(SOR SMC Pg No. 14 Design Mix M20)

SR. NO. DESCRIPTION QTY UNIT AMOUNT

(2) Slabs having more than 8 Cm & upto 10 Cm thickness. PART (A) - CIVIL WORKS

Ground Floor 0.00 C.M. 7850.27

First Floor 0.00 C.M. 7889.87

(3) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 60.30 C.M. 7268.63

First Floor 0.00 C.M. 7308.23

Terrace Floor 0.00 C.M. 7347.83

(4) Having more than 13 cm. Thickness

Ground Floor 0.00 C.M. 6690.46

First Floor 0.00 C.M. 6730.06

(SOR SMC Pg No. 14 Design Mix M20)

Ground Floor 0.90 C.M. 9381.78

First Floor 1.10 C.M. 9421.38

Terrace Floor 1.20 C.M. 9460.98

(SOR SMC Pg No. 14 Design Mix M20)

Ground Floor 5.90 C.M. 6875.78

First Floor 5.90 C.M. 6915.38

Terrace Floor 5.90 C.M. 6954.98

(SOR SMC Pg No. 14 Design Mix M20)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg. 20 m.m Nominal size)& curing comp. incl.

cost of from work in: wall caps/ copings.

(SOR SMC Pg No. 9 It No. 97) 0.40 C.M. 3982.62

Providing, mixing, placing, compacting by machine vibrator, curing, testing M20 Design mix concrete as per IS

17 456:2000 (latest revision) and as per tender specification in all items including cost of form work and rendering but

excluding cost of reinforcement

(F) Stair cases including landing etc.

Ground Floor 0.00 C.M. 7062.46

First Floor 0.00 C.M. 7102.06

(G) Vertical and horizontal fins

Ground Floor 0.00 C.M. 9275.80

First Floor 0.00 C.M. 9315.40

(SOR SMC Pg No. 14 Design Mix M20)

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work incl. bending, binding & placing in position

Ground Floor 10268.00 Kg 76.21

First Floor 845.00 Kg 77.21

Terrace Floor 1212.00 Kg 78.21

Stair Cabin Top 0.00 Kg 79.21

(SOR SMC Pg No. 2 It No. 15)

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in Cement

Mortar 1:6 (1- Cement : 6 -fine sand) (C) Fly Ash Bricks

Ground Floor 74.70 C.M. 4511.97

First Floor 81.20 C.M. 4786.95

Second Floor 68.60 C.M. 5061.92

Stair Cabin Top 24.60 C.M. 5379.24

(SOR SMC Pg No. 2 It No. 16)

Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 - coarse sand ) in foundation and plinth (C)Fly Ash Bricks

Ground Floor 0.00 S.M. 678.86

First Floor 0.00 S.M. 685.11

Second Floor 50.30 S.M. 691.37

(SOR SMC Pg No. 2 It No. 17)

Providing & Applying 15mm.th.cement plaster in single coat on brick/ concrete walls similar surfaces for

21 plastering & finished even & smooth with a floating coat of cement slurry mixed with admixture of lime or neeru in

required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and similar surfaces.

Ground Floor 660.60 S.M 237.51

First Floor 853.70 S.M 265.65

Second Floor 633.90 S.M 293.79

(SOR SMC Pg No. 3 It No. 25)

Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete walls similar surfaces for plastering

22 & finished even & smooth with a floating coat of cement slurry mixed with admixture of lime or neeru in required

proportion etc. comp. in C.M 1:3 (1 cement : 3sand)

(B) for ceilings and soffits of stairs

Ground Floor 514.70 S.M 214.60

First Floor 64.10 S.M 242.74

Second Floor 64.10 S.M 270.88

(SOR SMC Pg No. 3 It No. 24)

Providing and fixing 150 mm wide, approved quality chicken wire mesh (FRP / PVC)at junction of brick work

23 and RCC work or two dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before

applying the plaster, including curing, scaffolding all complete as directed.

Ground floor 58.80 S.M. 102.00

First Floor 45.90 S.M. 102.00

Second Floor 34.90 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124) MR

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar surfaces at all floor levels consisting of

mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1 cement: 1 sand)

apply thick cement slurry and apply roller horizontal as well as vartical ( two times ) up to good quality and size of

grain in elevation as per directed by engineer incharge.

Ground Floor 337.90 S.M 324.00

First Floor 337.90 S.M 324.00

Second Floor 337.90 S.M 324.00

Terrace Floor 84.60 S.M 324.00

(SOR SMC Pg No. 3 It No. 28) MR

25 Providing throating or plaster drip and moulding it to R.C.C. chajja etc. comp.. For all floor

Ground Floor 46.80 R.M 41.66

First Floor 46.80 R.M 41.66

Second Floor 46.80 R.M 41.66

(SOR SMC Pg No. 3 It No. 29)

26 Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For all Floor (M.R.)

Ground Floor 50.00 R.M 50.00

First Floor 50.00 R.M 50.00

Second Floor 20.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush pointing in white cement.

Ground Floor 0.00 S.M 1040.35

First Floor 459.00 S.M 1040.35

Second Floor 30.00 S.M 1040.35

(SOR SMC Pg No. 4 It No. 44)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with white cement slurry.

Ground Floor 13.80 S.M 1081.71

First Floor 13.80 S.M 1081.71

Second Floor 92.00 S.M 1081.71

(SOR SMC Pg No.4 It No. 45)

Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria, Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm (Average) base of cement mortar 1:6 (1 Cement :

29 Coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing

flooring and jointed with colour cement slurry including finished with flush pointing & cleaning the surface etc.

comp.Size 24" x 24" For Antiskid tiles

Ground Floor 0.00 S.M 1397.83

First Floor 0.00 S.M 1397.83

Second Floor 13.20 S.M 1397.83

(SOR SMC Pg No.4 It No. 43)

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-

30 cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Ground Floor 459.00 S.M 989.45

First Floor 0.00 S.M 989.45

Terrace Floor 0.00 S.M 989.45

SR. NO. DESCRIPTION QTY UNIT AMOUNT

(SOR SMC Pg No.4 It No. 32) PART (A) - CIVIL WORKS

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on

31 10mm thick cement mortar 1:3 (1- Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment

to match the shade of slab including rubbing and polishing etc. complete.

Ground Floor 0.00 S.M 1076.94

First Floor 0.00 S.M 1076.94

Terrace Floor 0.00 S.M 1076.94

(SOR SMC Pg No.4 It No. 33)

Providing and constructing sandwitch type Granite stone cooking platform 0.6 mt. wide & 0.75 mt. height,

including one end side granite stone (Double Polish) of 1.25 mt. height & front granite stone patti of 10 cm

wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with finishing smooth with

cement slurry as required and Stainless Steel sink of 0.45 mt x 0.45 mt size of approved quality and make with

required all fitings & fixitures etc. comp as per instruction given by site in charge at all floors. (Basic rate of Granite

(SOR SMC,Pg No.11, It No. 123) MR

Providing and filling in depressions of Bath and W.C. At all floor levels, after completing plumbing work of pans,

pipes,traps etc.with cinder or fly ash as directed by Engineer in charge etc. comp..

All Floor 13.20 C.M 500.00

(SMC SOR,Pg No.6, It No. 61)

Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows & clearstory windows incl. Indian

34 teak wood frames of finished size 12cm x 7cm.incl. anodized aluminum fixtures & fastenings incl. Primer coat of

approved quality & two coats of oil painting etc. For all Floor

(A) Fully Panelled 24.50 S.M 5533.68

(SOR SMC Pg No.5 It No. 53)

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP shutter with wood grain raised

panneled design finish shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the shutter

& frame is to be filed up with injected polyurethene foam done in situ along with embedded wooden pieces for

stiffening & also taking hinges & fixtures. The whole FRP frame & shutter is to be water proof weather

proof,termite proof &resistance to mild acid/alkali. Rates are to be inclusive of S.S.hinges with fastener sleeve &

alluminium fixtures & fastentings.

(A)'Same as Above But Without Frame 9.40 S.M 2019.98

(SMC SOR,Pg No.5, It No. 55)

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face water proof Ply Vennered & 1.5 mm

th.laminate shall be pasted on both side with adhesives as specified by the manufacturers. The laminate shall be as per

approved shade & texture, of make incl. Sal wood frames of finished size 12cm x 7cm.incl. S.S. Hinges with nessary

screws & Anodized aluminum fixtures & fastenings For all Floor

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 4.90 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

Providing and fixing window having extruded aluminium Powder Coated section frame main outer size 63.50 x

38.10 x1.95 mm (of Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track member size 61.85 mm x

31.75 mm x 1.20 mm (of jindal section no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

mm x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding shutters of horizontal member size 40 mm

x18 mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical member of size 40 mm x 18 mm x

mm (of jindal section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm thick

tranparent bronze colour tineted float glass with powder coated aluminium fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc. complete for window.

(A) Same as above but colour anodized 77.50 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A)

Providing and fixing window having extruded aluminium Powder Coated section frame main outer size 95 mm x

24 mm x 1.17 mm (of jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal Three track member size

mm x 31.75 mm x 1.30 mm (of jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical member of size 92 mm x

38 mm x 1.50 mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mm x 0.00 S.M 1591.87

18 mm x 1.29 mm (of jindal section no:8947 @ wt. of 0.456 kg/mt), vertical member of size 40 mm x 18 mm x

mm (of jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminium fittings & fixtures and transparent silicon sealant glass fixing to frame as per details etc.

(A) Same as above but colour anodized 0.00 S.M 1591.87

SMC SOR Alluminium Work ITEM NO.2(A)

Providing and fixing standared extruded of aluminium section of size 61 x 37.0 x0.90 mm (of Jindal section

39 no.14080, @ Wt. 0.471 Kg per mt) with Powder Coated alluminium frame with 5 mm thick transparent bronze 0.00 S.M 2336.00

colour tinted float glass as details etc. complete for fix window

A) Same as above but Colour anodized 1.60 S.M 2336.00

SMC SOR Alluminium Work ITEM NO.5A MR

Providing & laying granite slab 18mm thick in Window-Door seal Frame Etc laid on 10mm thick cement mortar

40 1:4 (1 Cement : 4 Coarse sand) with nessary adhesive material and finished with flush pointing in white or colour

cement, including rubbing & polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)

For all Floors. 94.80 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

41 Labour Charges For Edge Finished For Granite for all floors

For all Floors. 1232.10 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

Providing & fixing M.S.Grills of required pattern to wooden frames of windows etc. At all floor levels with M.S. flats at

42 required spacing & frame around square or round bars with round headed bolts & round headed bolts and nuts or by

screws incl. Priming coat of Red lead paint etc. comp.

For all Floors. 833.60 Kg. 104.20

SMC SOR, PAGE NO 14 IT NO

Painting two coat (excluding priming coat) on new steel and other metal surface with synthetic enemal paint,

burshing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters

For all Floors 41.70 S.M 65.31

SMC SOR, COLOUR IT.No. 8, Pg No.15

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary

stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners

, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as

per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners etc.)

SMC SOR, PAGE NO 11 ITEM NO 120, MR 0.00 Kg. 450.00

(1) The whole work is to be executed through specialized agency with a guarantee of 10 (Ten) years given on a prescribed

proforma duly stamped (2) The rate shall include for work at all floors & conducting water proof test as directed. (M.R.)

B) Providing and laying integral cement based water proofing treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of following operations. (a) Applying and grouting a slurry coat of neat

cement using 2.75 kg/sqm of cement admixed with proprietary water proofing compound comforming to IS:2645 over the R.C.C.

slab including cleaning the surface before tratment.(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm

size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with proprietary water proofing compound conforming

to IS:2645 ,brick bats is finally covered by jointless cement plaster 20mm th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth finished with trowel with false chequered marking of 300 mm.size.The treatment

is carried along the vertical surface of the parapet & other adjoining wall up to height of about 300 mm in a shape of quarter round

vata Incl. curing etc. Comp. With average thickness of 120 mm and minimum thickness at khurra as 65 mm.(c) The whole terrace

so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be

(c) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All

above operations to be down in order and as directed and specified by the engineer-in-charge. With average thickness of 120 mm

and minimum thickness at khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

Terrace and staircabin top 0.00 S.M 511.00

SMC SOR, PAGE NO 6 IT NO 62 B M.R.

(A) Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C.,kitchen and

the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS : 2645 in

recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound confirming to IS:2645 about 25 mm. th' in the floor of

the depression & about 18mm th' On the side walls of the depression up to the floor level, water proofing plaster about 18 mm.

th' be continued on the walls above the floor level for a height of 600 mm. with surface suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size spreading @0.008 C.M./S.M., thoroughly embedad in plaster

layer. as per specifications & instructions of Engineer in charge (Cement consumption 0.316 Bags / S.M.)

For all Floors 44.70 S.M 296.00

SMC SOR, PAGE NO 6,IT NO 62 B M.R.

SR. NO. DESCRIPTION QTY UNIT AMOUNT

PART (A) - CIVIL WORKS

Providing & Applying Surface Water Proofing treatment on existing Water proofing.

(1) Cleaning Surface Slab up to Mother slab & free from any Loose Material. Paint, Dust, Greaze or Remove all existing bituminious

Coating Completely. It is recommended to use intense wise brushing on high speed Water jet for through Cleaning.

(2) The Substrate must be checked for its Soundness using Small hammer. All Cracks at corner joint, Channels and Parapet Should

be Properly treated.

(3) Cracks/construction joints treatment: Opening the cracks/construction joints,if any, in V/U shape using electrically operated

46 cutting machine. Cleaning the surface thoroughly from dust and loose partical using wire brush and air blower. Filling the cracks if

any with polymer modified cement mortar hybrid PU Sealant depending on the width of crack/joint.

(4) Epoxy primer:The Epoxy primer must be applied on clean and dry surface by mixing base and hardner in equal proportions

with the help of strirrer and adding equal amount of water and appling on the surface at 80-100 grams per sqmt and allowed it to

dry untill tack free.

(5) Hybrrid polyurea part-A(base) and part-B(hardner) are packed in two separate containers having the correct predetermined

mixing ratio by weight.Stir individual container separately,Part-A and PArt-B very well, to get

Terrace and staircabin top 496.40 S.M 494.00

SMC SOR, ,REHAB. WORK IT NO 17 M.R.

Providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface

using white cement including rounding off junctions and extending them upto 15 cm along the wall clearing with water

and oxalic acid etc. as directed.

SMC SOR, PAGE NO 12 IT NO 131 496.40 S.M 747.29

Apply two coats of putty and two coats of primer of approved brand and manufacture on new wall surface to give an

48 even shade including thoroughly brushing the surface free from mortar dropping and other matter and sand papered

(A) for wall and similar surfaces

For all Floors 2148.20 S.M 40.59

(B) for ceilings and soffits

For all Floors 642.90 S.M 40.59

SMC SOR, COLOUR IT.No. 4, Pg No.15

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface

49 to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter

and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 2148.20 S.M 79.39

(B) for ceilings and soffits

For all Floors 642.90 S.M 79.39

SMC SOR, COLOUR IT.No. 5, Pg No.15

Providing & applying two coats of weather shield max paint (3 coats may be required in case of darker colours.)of

ICI Dulux or Apex Ultima of Asian Paint including applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc. complete and as directed by the architects and manufacturers.

Surface Preparation : surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking

paint. This can be achieved by brushing with a wire/ stiff coir brush, followed by water jetting if required. Fill up all

minor cracks and defects with white cement and sand mixture in the ratio 1:3. For application on previously painted

wall, previous coatings of paint must be thoroughly scraped off and Clean the surface thoroughly using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours. Application of putty is not

recommended. Minimum 4-6 hours duration is required between each coat of weather shield max paint

For all Floors 1098.30 S.M 82.00

SMC SOR, colour works,Pg No.16,item no.-17

Providing & laying granite slab 18mm thick in flooring, treads of steps and landing laid on bed of 20mm thick

51 cement mortar 1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished with flush pointing in white or

colour cement including rubbing and polishing complete. (Basic Rate:- Rs.1347.46/S.M.)

For all Floors. 0.00 S.M 2410.00

SMC SOR 15-16, PAGE NO 4,IT NO 39 M.R.

Providing & laying granite slab 18mm thick in skirting, risers of steps, dedo and pillars laid on 10mm thick

52 cement mortar 1:4 (1 Cement : 4 Coarse sand) and finished with flush pointing in white or colour cement including

rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

SMC SOR 15-16, PAGE NO 4,IT NO 40 M.R. 0.00 S.M 2449.00

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to shpe with hooked ends to RCC slabs

curing, layig including painting the exposed portion of loops, all as per standard design complete.

For all Floors. 40.00 Nos 129.02

SMC SOR , PAGE NO 5, IT NO

Steel work welded in built up sections, framed work including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint (A) in beams & joists channels angles, tees, flats with connection plates or angle cleats as

in main & cross beams,hip & trussed purlins connected to common raffers & the like.

For all Floors. 1.00 Qtl. 9047.86

SMC SOR ,Pg No.9,IT NO 98(A)

Providing and Fixing Hollow steel Sections Framed Work including Cutting, Hoisting, Welding & Fixing in position

Purlin, Main Chord etc. as per Engineer- in-charge.TATA / JINDAL / ASIAN Make

For all Floors. 250.00 Kg. 126.00

SMC SOR ,Pg No. ,IT NO

Providing & fixing colouron galvaniced steel, zinc / aluminium allus coated sheet 0.5 mm. thick roofing fixed with

56 gslvanised grom J or L hook bolts and bolt 8mm dia with bituman and impet washer filled with white lead etc.

Excluding the cost of purlins rafter and trusses. (Tata / Jindal or equivalent)

SMC SOR ,Pg No. ,IT NO

Providing and applying cement mortar (1:3) modified by using polymer and expanding grout additives at 25mm

thickness for repair/strengthening of various RCC elements at all floor levels, lead, lift, including breaking, chipping,

dismentling existing cover concrete and exposing existing reinforcement, applying wirebrush for making surfaces of

57 steel and concrete free from rust and other loose materials, applying rust removing chemical on existing

reinforcement, applying anti-corrosive coating on existing reinforcement, applying polymer bonding agent on existing

concrete surfaces before applying polymer modified mortar in specified thickness as directed by the Engineer-in-

SMC SOR, ,REHAB. WORK IT NO 2 M.R.

RCC Core Cutting is about making precise, circular cuts for creating holes of required diameters for Rehabilitation in

58 civil works. The core drilling rod is fitted with diamond pieces at the drilling end. The core cutting machine can be used

for both horizontal and vertical hole making purposes.

SMC SOR, ,REHAB. WORK IT NO 12 M.R.

SMC SOR, ,REHAB. WORK IT NO 13 M.R.

59 Polishing flooring after repair work done as direct by E.I.C 459.00 S.M 172.00

SMC SOR, ,REHAB. WORK IT NO 15 M.R.

Providing and filling Epoxy grout of approved or suggested brand by consultant / Engineer in charge in

4mm to 6mm thick tiles joint including spacer with cleaning of joint by vacuum or blower etc

SMC SOR, ,REHAB. WORK IT NO 15 M.R.

Providing and applying cement mortar 1:4 enriched with expanding grout additive in required proportion in cement

for repair of cracks in RCC and non-RCC members after making 25mm x 25mm groove, cleaning the surface and

applying coat of bonding, finishing smooth the repaired surfaces, providing and applying curing agent on the repaired

61 surfaces, etc. complete at all floor levels as directed by engineer-in-charge. The make and quality of expanding grout 100.00 R.M. 40.00

additives, bonding agent, curing agent, etc. shall be approved by the engineer-in-charge. The procedure for application

shall be strictly in accordance with manufacturer's detail specification, which shall be submitted before start of work

and shall be approved by the Engineer-in-charge.

Demolishing Brick work and stone masonry incl. including stacking of serviceable material and disposal of

unserviceable material with all lead and lift. (ii) In cement mortar

SMC SOR- DEMOLATION, It No.

Removing the scraping of old deteriosted plaster of any thickness form wall/R.C.C. member including strcking of

serviceable material and disposal of unserviceable material from site of work with all lead and lift.

SMC SOR- DEMOLATION, It No.

Demolition including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.

SMC SOR- DEMOLATION, It No.

Dismantling C.I. Pipes, G.S.W. Pipes and A.C.,PVC rain water pipes with fittings and clamps including stacking the

materials with all lead & lift ( For any Dia. of pipes )

SMC SOR- DEMOLATION, It No.

Dismentaling of Tiles floors laid in mortar including stacking of serviceable material and disposal of unserviceable

material with all lead and lift

SMC SOR- DEMOLATION, It No.

SR. NO. DESCRIPTION QTY UNIT AMOUNT

PART (A) - CIVIL WORKS

Dismantling Doors, Windows, Ventilators etc. (wood or steel) shutters including chowkhats, architreaves, holdfasts,

and other attachment etc. complete and stacking them within all lead and lift. (1) Not exceeding 3 sq. meters in area .

SMC SOR- DEMOLATION, It No.

Providing and fixing rebar of following diameter using chemical grout of Swanchore/Hilti/Fischer or equivalent make

including cost of all equipments, tools, material, labour, etc. Standard procedure as mentioned in manufacturer's

specifications shall be strictly followed, which shall be submitted and got approved from the authority prior to start of

work. The rate shall also include cost of drilling of hole of required diameter and depth as mentioned in manufacturer's

specification, cleaning the hole with required air blower and other necessary tools and tackles, positioning, providing

and grouting chemical, allied fixtures and fasteners, etc. but excluding the cost of reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and equipments, etc. complete as directed by the engineer-in-

SMC sor Page no10 It No.

fixing of CO2 type Fire Extinguisher of capacity 4.5 kg filled with Co2 Gas as per IS 15222 with controll discharge

69 mechanis, fitted with Hose & Horn applicable on Class B fire rating 21B confirms to IS 15683 bearing ISI mark. Co2 8.00 Nos 4200.00

cylinder as per IS

SMC SOR, PAGE NO.12,IT NO 136 (MR)

Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as per IS 4308 with necessary clamp for

erection on wall.6 Kg Capacity

SMC SOR, PAGE NO.12,IT NO 135 (MR)

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at

71 bottom duly painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand 8.00 Nos 350.00

provided or hung on wall hook.

SMC SOR, PAGE NO.12,IT NO 137 (MR)

TOTAL COST OF SUPER STRUCTURE

WATER SUPPLY AND SANITATION

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all floor levels, size 500mm x 400 mm incl.

72 mm size "P'or "S" trap for water closet squatting pan joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1

fine sand) etc. Comp.(A) Vitreous china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117*,Jaquar,HindWare

For all Floors. 1.00 Nos. 3275.00

SMC sor- Sanitary Items,Page no22,It No.

Providing and fixing Wash Down Water closet European type W.C. pan with integral P or S trap with normal closing

73 seat cover L bend ncluding jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 find sand) (A) Viterous

china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/ C0278,HindWare sleek 20011, Jaquar- CNS-WHT-

SMC sor- Sanitary Items,Page no21,It No.

Providing and fixing plastic seat and cover for wash down water closet with C.P. brass hinges and rubber buffers (B)

Plastic seat and cover.

For all Floors. 2.00 Nos 291.33

SMC sor Page no7 It No.

Providing & fixing Wash Hung basin with single hole for pillar tap , Size- 550 x 400 mm at all floor levels, with C.I. or

M.S. Brackets painted white incl. cutting holes & making good the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar SLS- WHT -6801 ,HindWare10004 2.00 Nos 2656.00

SMC sor- Sanitary Items,Page no21,It No.

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor levels, mounted on 6 mm. th. A.C.

sheet or plywood sheet & fixed to wooden plugs with C.P.brass screws and washers etc. For all Floor

All Floor 2.00 Nos 833.73

SMC sor Page no7 It No.

77 Providing & fixing C.P. brass pillar cock with copper connection, C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare Cat. No.: F650003, Jaquar FLR-5011N 2.00 Nos 1423.00

SMC sor Sanitary Items,Page no21,It No.

78 Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, Parry ware G3104A1, HindWare F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK 8.00 NO 1323.00

SMC sor Sanitary Items,Page no21,It No.

79 Providing flush cock consisting lever, cartridge sleeve & flange & concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101 , Parry ware T9824A1&T9823A1, Jaquar FLR

KN , CONCEALED BODY ALD-081,HindWare F280052 & CONCEALED STOP COCK F850105

SMC sor Sanitary Items,Page no21,It No.

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P. copper connecting pipe 450 mm long and nuts,

washer and brass flange complete, including cutting and making good the wall where required.

Make- Cera, Parry ware,HindWare

For all Floors. 3.00 Nos 1432.00

SMC sor- Sanitary Items,Page no21,It No.

Providing and fixing Towel Ring fabricated from seamless stainless steel tube 2mm thick in bath room with polished

wall flange at end of bars with heavy duty anchor fasteners & accessories

Make- Cera, Parry ware, Jaquar ,HindWare

For all Floors. 2.00 Nos 890.00

SMC sor Sanitary Items,Page no22,It No.

Providing & Fixing stainless steel recessed type Soap dish of approved make. Including providing & fixing screws,

washers, cutting & making good the walls.

Make- Cera, Parry ware, Jaquar ,HindWare

For all Floors. 2.00 Nos 793.00

SMC sor Sanitary Items,Page no21,It No.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110 mm diameter with jali of the following

83 nominal diameter of self cleaning design with C.I. scread down or hinged grating including the cost of cutting and

making good the walls.

All floor 5.00 558.36

SMC sor.Page no 8,It No.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type "B") of Prince/ Supreme/ Jain/ Astral/

84 Tulsi/ Finolex make for soil and waste discharge system at all floor levels incl. All fixtures like bends, tees, shoe etc.

jointed with resin of approved brand & manufacture etc. comp. (M.R.)

SMC sor,Page no 8 It No. 84 M.R.

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of Prince/Supreme/Jain/Astral/ Tulsi/

85 Finolex make for rain water at all floor levels incl. fixtures like bends, tees, shoe etc joined with resin of approved

brand & manufacture etc. comp. (M.R.)

SMC sor ,Page no 8, It No. 85 M.R.

86 Providing & Fixing in position PVC Cowl vent to pipes of Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.

SMC sor- Page no.8, It No.

Providing & Fixing Kathi around the vertical PVC drainage pipes for concealing with cement plaster 20 mm avg

thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as per instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 44.00 R.M 173.00

(B) 100 mm /110 mm PVC PIPE 44.00 R.M 180.00

SMC sor- Page no 8, It No. 93 MR

Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line of Prince/ Supreme/ Jain/ Astral/

Tulsi/ Finolex make including fittings make or equivalent as approved by angineer-in-charge. Pipe shall be fixed on

the wall the help of clamp at every two meter C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

SMC sor Page no 8 It No.

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/ PART (A) - CIVIL WORKS

Tulsi/Finolex make for water supply

line at all floor levels incl. fixtures like bends, tees, shoe etc joined with resin of approved brand & manufacture etc.

89 comp. Pipe shall be fixed on the wall the help of clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

SMC sor Page no 8 It No. 87 MR

Providing and fixing M.S. holder bat clamps at all floor level,of approved design to C.I. or S.C.I pipes including cost of

cutting holes and making good the wall etc. comp. (M.R)

SMC sor- Page no 8, It No.

Providing & fixing Z - clamps at all floor levels of approved design to C.I. S.C.I. or PVC pipes including the cost of

cutting holes & making good the wall etc.

(C) 150 mm to 200 mm dia 0.00 NO 98.00

SMC sor- Page no 11, It No. 121 M.R.

92 Providing & Fixing gun metal check or non return full way wheel valve at all floors levels, etc. complete.

SMC sor Page no 8,It No.

93 Providing & Fixing abonite ball cock of approved qualities directed etc. comp.

SMC sor- Page no 8,It No.

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1 of following nominal internal diameters incl.

Testing of pipes and joints etc. Comp.

SMC sor- Page no.7, It No.

SMC Storm drainage SOR 22-23, Page no1 It No.1

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)chamber & water tight C.I. cover with frame of

95 300mmx300mm size (inside) with weight includ. plastering smooth inside & outside 15mm. th' in C.M.1:3 etc. comp.

(i) Square mouth traps---(A) 100mm x 100mm Size -P type

SMC sor,Page no 7, It No. 73 2.00 Nos 1292.19

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension ,455 x 610 mm & 450 mm deep sewer trap

chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside

to exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less than 38 kg. On top etc. comp. for single pipe.

(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 1.00 No. 2904.47

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 222.71

SMC sor, Page no.7, It No.75

Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 1:5 with cement plaster 15 mm th' in

C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate

20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be not less than 38 kg. On top etc. comp.

Inside dimension,455 x 610 mm &450 mm deep for single pipe

(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 0.00 No. 2681.76

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 242.39

SMC sor - Page no7,It No.76

98 Providing and fixing C.I. manhole cover 0.60 mt. x 0.45 mt. size having weight not less than 35 kg. etc. complete.

SMC sor- Page no.8, It No. 83 1.00 NO 958.17

99 Providing and fixing G.I, Rain water spout of 50 mm dia and 30 cm Length

SMC sor- Page no 6 It No. 64 10.00 NO 101.91

Providing & fixing white vitreous china urinal of size 450 x325mm as per IS-2556 (Part-2 ) with C.I. hangers and

100 15mm dia. C.P. spreader,32mm dia CP bottle trap and pipe to wall with C.P. flange complete including cutting and

making good the walls and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-WHT 13261H ,HindWare BACK SMALL 60001 3.00 NO 2476.00

SMC SOR- Sanitary Items,Page no.21, It No.8

Providing & fixing at all floor levels,both face polished machine cut edge Marble slab for urinal partition joined with

grey/White cement slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

SMC sor- Page no7 It No. 66 MR 4.00 S.M 1050.00

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing, centering, vibrating, curing & mixed with

approved water proofing cement compound or "CEMWET"or"PIDICRETE LW"integral water proofing admixture as

water proofing agent to be mixed with 50 kg. cement bag shall be as recommended by the manufacture of the water

proofing material, concrete work for top, bottom slab & side pardi for Under ground Tank & Item incl. Necessary

102 excavation & refilling the available earth, 15 cm th' C.C 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4 outside wall,

inside R.C.C. pardi as per design, 10mm.th. water proofing cement plaster in C.M. 1:3 with smooth finishing,watering

etc.Comp.to all inner face & bottom of tank curing etc. comp. incl. Locking arrangement, outlet, inlet, overflow & wash

out pipe arrangement as necessary & C.I. Cover 0.60 x .045 weight not less then 35kg. etc. com. as per structural

drawing excluding Steel & as directed by Engineer in-charge

Under Ground water Tank 0.00 Lit 5.46

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria, Jhonson,Nitco,Somani ,Bell make at all floor levels,

103 in flooring, treads of steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3 sand) finished with flush

pointing in white cement etc.com. For all floors

Under Ground water Tank 0.00 SM 857.42

SMC SOR, Page no4, It No.

Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria, Jhonson,Nitco,Somani,Bell make at all floor levels in

104 skirting risers of steps & dado on 10 mm. th. C.M.1:3(1cement :3 sand) including necessary cement paste for fixing

and joined with white cement slurry etc. complete. For all floors

Under Ground water Tank 0.00 SM 887.64

SMC SOR, Page no4, It No.35

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work incl. bending, binding & placing in position

etc. comp. Upto G.L./P.L.

Upto G.L./P.L. 0.00 Kg. 76.21

SMC SOR- Page no1, It No.

Providing erecting and fixing double coated Sintex / Super / Reno PVC (ISI) mark water tank of required capacity each

with all necessary fittings & connection etc. complete on terrace.

SMC SOR- Page no 8, It No.

Total cost of Water supply & sanitation

(A) Total amount up to plinth

(A) Total amount up to plinth

(B) Total amount above Plinth

(B) Total amount above Plinth

(C) Total amount of water supply & sanitary

(C) Total amount of water supply & sanitary

TOTAL OF CIVIL WORK (A+B+C)

PART (B) - ELECTRICAL WORKS (PREPARED BY ZONE)

NOTE: For use of ZHFR/HRFR Copper wires in place of FRLS PVC wires add 5% in Item of Point wiring Item No 1-1-1 to 1-2-5 & 1-5-1 & 1-5-2.

Sr. Description of Work/ Item Qty Unit Rate Amount

PART 01: Internal Wiring

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular

type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm PART

& earth(A) - CIVIL

wire of 1.5WORKS

sq.mm (green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected

complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC /

wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary

Lamp holder / ceiling rose / H.D.Connector as directed.as directed.as per pipe erected with following type of

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on /

in wall / ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete 12.00 Point 745.38 ₹

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Cat-III. (ZFLR/HFFR)

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall /

ceiling with following type accessories

Cat. III (ZFLR/HFFR)

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular

type switches and following type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame

6 covered with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with 8.00 Point 603.98 ₹

necessary batten/angle holder or ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per

site situation directed by Engineer In charge. 4.00 Each 160.59 ₹

[A] For One Gang

(4) TV Co-axial Socket outlet

(5) Electronic hum Free steps EME Fan regulator

(7) Blank Plate Single

(8) Computer RJ-45 socket

(11) 6 Amps. Bell Push

(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia

9 of pipes, in approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves,

trunking of size not below 12.5 mm in height as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm ₹

11 thick duly sealed in joint & erected on wall / ceiling of following size .

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with

ignition free and flame proof confirming BS with necessary end caps Internal and external bend, flat bends, coupler, tee

12 etc..All necessary accessories and measuring of following sizes

(1) 75 mm x 50 mm trucking

(3) 50 mm x 50 mm trunking 10.00 Mtr. 188.87 ₹

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size 125.00 Mtr. 112.11 ₹

(A) with medium class Rigid PVC pipe and accessories

13 (a) 2 wire 4 sq. mm

(b) 2 wire 6 sq. mm 25.00 Mtr. 147.46 ₹

(d) 3 wire 4 sq. mm 0.00 Mtr. 142.41 ₹

(e) 3 wire 6 sq. mm 0.00 Mtr. 200.99 ₹

(h) 4 wire 6 sq. mm 25.00 Mtr. 260.58 ₹

Providing and erecting Mains with ISI marked electrolyte stranded copper conductor, Non PVC Zero Halogen free fire

retardant insulated copper conductor, insulated wire (HRFR) conforms to IS-694, erected in existing pipe with 1.5sq.

mm copper conductor of same specifications for earth continuity of following size.

[c] 2 wire 1.5 sq.mm

[d] 2 wire 2.5 sq.mm 300.00 Mtr. 71.71 ₹

[f] 2 wire 6.0 sq.mm 75.00 Mtr. 140.39 ₹

[i] 3 wire 1.5 sq.mm 0.00 Mtr. 66.66 ₹

[j] 3 wire 2.5 sq.mm 0.00 Mtr. 102.01 ₹

[k] 3 wire 4.0 sq.mm 0.00 Mtr. 140.39 ₹

[o] 4 wire 4.0 sq.mm 0.00 Mtr. 190.89 ₹

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically

for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts 10.00 Mtr. 91.91 ₹

and bolts if required.

(f) One wire 10.00 sq. mm

(g) One wire 16.00 sq. mm 10.00 Mtr. 142.41 ₹

(h) One wire 25.00 sq. mm 0.00 Mtr. 236.34 ₹

(i) One wire 35.00 sq. mm 0.00 Mtr. 300.98 ₹

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs,

& wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary

16 connections. 300.00 Mtr. 20.20 ₹

[A] Conductor Size 0.5 mm

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Supplying & erecting approved make LAN cable of following size in existing PART

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with

18 krone strips 1.00 Each 1747.30 ₹

(c) Suitable for 50 pair

Subtotal Part-01 ₹

Part-02: Light Fixtures

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

(Fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders,

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder.

(ii) 5 to 8 watts

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure

die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % 1.00 Each 220.18 ₹

22 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting

clips complete.IP20

(i) 5-9 watts,Surge-2 KV

(ii) 11-15 watts, Surge-2 KV, CAT- III 0.00 Each 427.23 ₹

(iii) 16-20 watts, Surge-2 K , CAT- III 2.00 Each 589.84 ₹

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV, CAT: III

24 (vii) from 45 to 48 watts, 24" x 24", Surge-2 KV 4.00 Each 2091.71 ₹

Subtotal Part-02 ₹

Part-03 LT Switchgear, Distribution Boards & LT Panel

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA.

and above at 415 V . having normal current rating 250A. with variable thermal & magnetic release suitable to work on

25 A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

ICS=100% of ICU only. Cat III 0.00 Each 20946.39 ₹

Supplying & erecting approved make Four Pole 415V change over switch interior for panel mounting with operating

26 mechanism A.C.23 duty confirming to IS for 1.00 Each 13353.21 ₹

Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 G.M.S. sheet, dust & vermin proof

having hinged door with rubber gasket and necessary busbar supports with COPPER busbar having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulation tape for ₹

27 phase sequence, three phase & neutral each suitable for following current capacity with necessary painting mounted

on wall or pedestal frame of required size with necessary connections.

(B) Suitable for 200 Amp. capacity 1.00 Mtr. 5731.75 ₹

(C) Suitable for 300 Amp. capacity 0.00 Mtr. 8539.55 ₹

Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and

28 having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark 24.00 Each 112.11 ₹

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having following capacity

29 (A) 6 to 32 Amp.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

(a) 6 to 32 Amp.

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket, company fabricated

31 powder coated sheet steel enclosure erected as directed with connection. 1.00 Each 660.54 ₹

[B] 15 Amp. / 5 Amp. Five pin Universal Socket- CAT III.

Supplying & erecting approved make Electronics Starter and relay for air conditioners in ABS plastic moulded housing.

Company fabricated with bakelite terminal for connection with silver coating bimetallic contact in switching device for

o/p with following features.

(1) Low Voltage Protection below 130 V

(2) High Voltage protection above 270 V

(3) Overload protection for 2-5, 4-10, 8-14, 10-16, 14-22 Amp. (inverse time chara-)

(4) Indicating LEDs for AC on LV, HV, O/L, T/D

(5) With unique feature of 3 minute of time delay

33 Plastic enclosure fitted with DIN rail suitable for incorporating One / Two nos. MCB 1.00 Each 52.52 ₹

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

(iii)8 way 1.00 Each 1152.41 ₹

(A) single phase incoming and horizontal single phase outgoing

(a) single door (IP-30) 1.00 Each 867.59 ₹

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(a) sheet steel single door

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(a) sheet steel single door

(iv)12 way 4.00 Each 3125.95 ₹

Providing and erecting approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of

quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. 4.00 Each 1969.50 ₹

35 rating erected as directed

(i) 25 Amps.DP, Cat-III

(ii) 40Amps. DP, Cat-III 2.00 Each 2235.13 ₹

(iii) 63 Amps. DP, Cat-III 1.00 Each 2654.28 ₹

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Providing and erecting metallic vitrified danger notice board as per languagePART (A) - CIVIL

suggested WORKS

by engineer incharge for

MEDIUM VOLTAGE installation to be erected as per IS-2551.

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for HIGH

VOLTAGE installation to be erected as per IS.-2551.

Providing & erecting Medium Voltage Danger Notice Board sticker as per language suggested by engineer incharge of

standard size as per IS-2551

Providing & erecting High Voltage Danger Notice Board sticker as per language suggested by engineer incharge of

standard size-as per IS

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted

with one coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated outdoor type double door

cubical panel board necessary IP-54 and above protection as per approval from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber

41 grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - 0.00 Sq. mt. 16323.62 ₹

bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with

epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following

approved manufacturers with following size.

(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory

(i) with 350mm depth

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED display, 0 to 750 AC

Volts range erected on existing panel board with all connection, wiring etc .with manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED display, external

43 CT operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing panel board with 1.00 Each 1558.43 ₹

all connection, wiring etc .with manufacturers calibration certificate.

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V on existing panel board

with necessary connections.

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete erected with

necessary connections.

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials connected to the meter

Providing and erecting following additional parts for panel mounting MCCBs

47 (A) Extended operating rotary handle with pad lock with three position trip,off,on suitable for 25A to 250 A panel 1.00 Each 873.65 ₹

mounting cat-III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA.

at 415 V. having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply

48 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. 0.00 Each 8055.76 ₹

ICS=100% of ICU only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA.

and above at 415 V . having normal current rating 250A. with variable thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

ICS=100% of ICU only

*Add 35% additional for microprocessor type of mccb in place of conventional for item no.3-4-1 to 3-4-12

Subtotal Part-03 ₹

PART 04: Earthing System

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T., OCB/ ACB/ Transformer LT

panel board, Motors etc. using proper clamp.

51 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 20.00 Kgs 794.87 ₹

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover. (A)(approved make OEM has to submit

test certificate including value of earth resistance of installation duly stamped and signed by agency and officer

52 Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be submitted by Agency.

(b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs 10.00 No. 5760.03 ₹

Back filling Compound :1 no. Bag of 25 Kg.

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive

Computer System(like Automation, SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following

size of moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with

all internal connections & complete erected in existing M.S.housing..

Subtotal Part-04 ₹

PART 05: LT Cables & Cable Termination

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for

55 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 50.00 Mtr. 126.25 ₹

(B) 4 core 6 Sq. Mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 25.00 Mtr. 490.86 ₹

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) 5.00 Mtr. 183.82 ₹

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core) 0.00 Mtr. 904.96 ₹

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

57 laid on wall with necessary clamps or in existing trench / pipe of following size of cables 15.00 Mtr. 153.52 ₹

(A) 4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid

58 on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. 100.00 Mtr. 215.13 ₹

(A) 3 core 2.5Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to

59 be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. 0.00 Mtr. 510.05 ₹

(C) 4 core 6 Sq. mm

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back

filling the same and making the surface as normal ground.

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road crossing or on floor with

61 necessary material in an approved manner and making the ground as per original. 20.00 Mtr. 263.61 ₹

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II

)with necessary connecting accessories of same material at required depth in existing trench for laying of cable.

62 below ground / road surface for enclosing cable

(A)50 mm outer dia

(C))90 mm outer dia 10.00 Mtr. 95.95 ₹

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for following size of cables.

(C) 2 to 4 core 10 Sq. mm 4.00 Each 38.38 ₹

(D) 2 to 4 core 16 Sq. mm 4.00 Each 47.47 ₹

(E) 2 to 4 core 25 Sq. mm 0.00 Each 51.51 ₹

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 8.00 Each 6.06 ₹

SR. NO. DESCRIPTION QTY UNIT AMOUNT

(B) 10 Sq.mm PART (A) - CIVIL WORKS 16.00 Each 13.13 ₹

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.

66 Supplying and erecting nuwood 12 mm thick on existing angle iron frame. 2.00 Sq. mt. 291.89 ₹

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make

of following Size. 100.00 Mtr. 104.03 ₹

(B) 3 Core x 2.5 Sq. mm.

(C) 3 Core x 4 Sq. mm 50.00 Mtr. 146.45 ₹

Supplying rubber matting of following thickness as per IS:15652/IEC

Subtotal Part-05 ₹

PART 06: Fan & Related Accessories

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark with

69 Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium blades with , canopy & 30 12.00 Each 1948.29 ₹

cms. down rod erected with earthing.(Make shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leckage and earthing.

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low

noise operation suitable for medium duty having following dia size and maximum speed in RPM 8.00 Each 2740.13 ₹

[B] 380 mm dia 900 RPM, Cat II

[D] 450 mm dia and 900 RPM. Cat.II 8.00 Each 3339.06 ₹

72 Providing suitable M.S. louver shutter of the Exhaust fan. 16.00 Each 368.65 ₹

Supplying and erecting approved make double ball bearing oscillating type Heavy duty bracket fan with Aluminium

Blades A.C. 23OV. 50cy/s wall mounted with height adjustment and rotary tilting device complete with guard, wall

bracket,mounting accessories as directed.

Subtotal Part-06 ₹

PART 07: Motor & Starters

Supplying and erecting Direct-on-line, Starter with 15A.rating contractor and with 4-14A. range, directly operated

thermal overload relay in sheet steel enclosure for 3phase 415V.50 c/s. A.C. motor up to 7.5 H.P.complete erected on

P.W. Block with necessary connection.

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase

submersible motor having

[D] For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr

75 head suitable for 50/65 mm dia delivery pipe cat III

[B] For 2 HP 3 phase open well horizontal mono block pump set suitable for 200 LPM @ 25 mtr head suitable

for 50 mm dia delivery pipe. 1.00 Each 10734.28 ₹

Supplying & erecting approved make Automatic liquid level controller 6A. with sensor testing as per instruction of

76 Engineer in charge on site complete with wiring connection with existing wires , with copper conductor from pump to 1.00 Each 2355.32 ₹

upper and lower tank.

Supplying & erecting approved make motor control cubical panel (Direct - on - line) made from 16 G. CRCA sheet

duly epoxy powder painted inside and outside with hinged doors and locking, arrangement consisting of suitable size

of ON- OFF isolator (AC - 3/23duty) main fuses, single phasing preventer, indicating lamps for R- Y - B phases,

overload relay, Automatic water level controller, Ammeter, Voltmeter each with two way selector switch incoming,

wires duly socket crimped, main contactor & overload relay, start - stop push buttons, to be erected on angle iron

frame grouted on wall as directed. The isolator, overload relay & contactors will be of L & T, Siemens or BCH make

(a) DOL up to 5.0 H.P.

Subtotal Part-07 ₹

Part-08: Cable Trays

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be

single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per

IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and

washers etc. erection with necessary support( included) as per Specification and as per instruction of engineer in

(1) 50 X 50 X 1.6 mm Thick

Providing and fixing approved make 'T' Junction for Perforated C type cable tray. Made from sheet steel. The Junction

should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max

17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing 0.00 Ea. 146.45 ₹

support as per Specification and as per instruction of engineer in charge of following size

(1) 50 X 50 X 1.6 mm Thick '

Providing and fixing approved make '90° Elbow' for Perforated C type cable tray. Made from sheet steel. The Junction

should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler

plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and 0.00 Ea. 98.98 ₹

as per instruction of engineer in charge..

(1) 50 X 50 X 1.6 mm Thick 90° Elbow

Subtotal Part-08 ₹

PART 09: Water Coolers & Purifire

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient

temp of 45˚ C. The outlet temp. of the water should drop by 15˚C within a hour, The water cooler should be comprising

81 of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, 1.00 Nos. 55893.40 ₹

thermostats, relay etc.complete with necessary inlet & outlet connection. The body of water cooler will be made from

Stainless Steel.

Supplying and erecting water filter cum purifier with ultra violate technology. (Aquaguard / waterdoc model or

equivalent symphony/ crystal/videocon model)

Subtotal Part-09 ₹

PART 10: Liasioning Work:

Charges for doing liasioning work for obtaining the necessary clearances from the Electrical inspector / competent

Authorities for the total Electrical installation, Elevator Inspection,co-ordinating with various agencies. All necessary

Working drawings, calculations, load calculaiton, test certificates, etc. as required by these authorities shall be

prepared and furnished by the EPC Vendor. Any modification/rectification as required by these authorities shall be

carried out by the EPC Vendor at free of cost. The fees required to be paid to these authorities for inspection shall be

borne by Owner on production of documentary evidences.

Subtotal Part-10 ₹

PART 11: Lift Work:

(a) General Features & Special Features of the all lift items shall be taken as below.

(b) for Handicap Lifts, Minimum 10 Passengers Lift Capacity shall be considered.same is to be informed to architect

/civil authority to keep necessary size of lift well.

(c) The lifts of 15/ 16 and above passenger capacity shall be taken for Hospital Lifts; Where in Description “ Stretcher

Lifts” shall be mentioned.

(d) The Rates of the following items are for the lift of Machine room less. For Machine room Lifts, rate for Rs. 1,50,000/-

shall be deducted in Total Cost for the Lifts from 4 to 13 Passenger Lift. Rs. 2,00,000/- shall be deducted in Total Cost

for the Lifts 15 and above passenger capacity as extra cost.

(e) Add Rs. 80,000/- for the DUPLEX control for the lifts up to 10 floors and add Rs. 10,000/- for additional each floor

above 10 floors.

(A) GENERAL DESCRIPTION OF LIFTS.

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with high efficiency shall be used.

SR. NO. DESCRIPTION QTY UNIT AMOUNT

PART (A) - CIVIL WORKS

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be provided in control panel.

[14] Mechanical over speed governor with governor calibration as per actual site parameters and submission of

calibration certificate submission, door key holes in the floor doors, fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by

the lift agency, along with the other steel structure works, foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as / if directed by

engineer in charge.

[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage Under Voltage protection

and THD eliminator in circuit for lift machine room and lift well with proper numbers of light points, with fixtures,

exhaust fan and plug points shall be provided by the agency. Only 3 phase Power Supply shall be made available by

department in lift machine room. Necessary Earthing as per Lift Act/Rules shall be arranged by Lift Agency.

[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of lift

shall be made by lift agency without any extra cost. (granite/marble fixing around all landing door openings are not in

lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary

permission from lift inspector and other authorities. [20] acrylic transparent licence/display A4 size holder in lift

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift

inspection during/after lift erection and provide report by third party authorized by concern licensing authority

[21] has toOperating

Car Panel provide third party

Buttons insurance

with upto completion

floor position of free maintenance

indicator/buttons period

must be of Auto andtype

Glow submit thevisible

clearly document

view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be provided

at appropriate height on the Rear & Side Wall Panels in Lift Car. [23] With Necessary KVA rating voltage controlled

Stabilizer suitable for your controller, drive and all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is sugested by CEICED

Department (electrical Inspector)

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category

1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial Communication mode

including Regenerative power efficient operation,on site programming facility, Anti nuisance, Pte-opening, BMS/RMS

with necessary online real time monitoring system having necessary connectivity for remote monitoring & other

suitable supporting hardware & software devices to fulfil the purpose.

2. Floor Indication LCD Display with call registration & brail mark with arrival gong and hall lantern & TFT Screen in

the car with MP3 Voice Announcer.

3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb for car and all Doors, All

landing doors must have fire rating up to 2 hours and car door must have multi-level crisscross beam door protection.

4. To & fro communication system & wiring (i.e. car , control room & guard room ) and Each elevator are equipped with

remote monitoring system.agency has to provide mobile app and user id and password for monitoring

DESCRIPTION OF LIFT :

Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features:

26 passengers . Ground plus 2 upper floors with Rated Speed of 1.0 m/sec with micro price/PLC control and 1.00 Nos. 1911966.36 ₹

(B) With General Specification attached herewith. Cat.III

Supplying & erecting approved make Lift Announcing solid state system in the Passenger/ Stretcher lifts having

AC2/ACVV/ACVF drives & automatic doors only. The system comprising following features & facilities.

(i) Announcing floor message, message to close period.(ii) Announcing ‘Emergency Message’ when lift is stuck

85 between floors due to power failure or any other reason. 1.00 Nos. 17119.50 ₹

(iii) Instrumental Music between floor announcing.(iv) Announcement in English / Hindi & Gujarati Languages..

(v) Flexible to accommodate special per-programmed message such as name of the building /office.(vi)Volume

adjustment control

Providing & erecting approved make overload non-start feature & overload warning Indicator system in the lift with

making use of sound isolated floating platform & micro switches on SI frame to get sensation of live load inside lift cage

at any given moment, with provides new fixtures of overload warning inside lift cage with new relay in the existing

control panel to activate ‘Overload Non-Start Function with carrying out additional wiring including laying of new

travelling cable, include minor civil work & without changing the existing capacity speed stops, travel & operation of

the desired lift

Subtotal Part-11 ₹

PART 12: Air Conditioner

Providing and erecting approved make split air-conditioning unit consisting of copper condensing unit with fan

motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit

and blower motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC pipes

87 suitable for ( cost includes powder coated Stand, Eco Friendly green gas charging, 15A plug top & Remote Control) 2.00 Nos. 46288.30 ₹

with necessary core cutting.

(1)For ISEER Range (KWH/KWH)(3.1 to 3.99)

(c) for 2 ton capacity

88 [a] For 1 Ton Capacity 1.00 Nos. 30713.09 ₹

SETC of Indoor(Chilling) Units, Outdoor Units, PIR Insulation Powder Coated GI Sheets, XLPE Cables & FRLS Wires

MCB / MCCB, Required LED light Fixures and modular accessories with necessary Major / Minor civil works at Cold

Cold Storage Room Size :-

(Internal dimention) : 5.736 Mtr (W) x 4.102 Mtr (L) x 3.000 Mtr (H)

Calculated Heat Load :- In the Scope of Contractor ( Consideration: Max. no. of specific usage with medicines and

ambient temperature = 50º Deg Celsius )

Required AC Units:- One Working + One Standby (100% Standby),

Temperature inside Cold Room required :- 2º C to 8º C,

Temperature Hold time :- 4 Hours in full load condition of Cold Room,

Thickness of insulation & Lamination:- Pre fabricated modular PIR (Poly Iso Cynurate) / panels min 100 mm Pre

painted powders coated on both sides with sheet thickness of 0.5 mm. GI Sheet shall be of Tata /Jindal /Ispat Only.

Floor :- min 100 mm thick PIR (Poly Iso Cynurate) panel with upper layer of 3 mm thick GI checkered plate (fixed on

ply) PIR shall be of Bakelite / Asawa Only.

Door Size and Type :- 100 mm thick PIR-Flush in type swing door - one / two numbers, adequate for comfortable

entry/exit main door width 2.5 feet.,

89 Pull Down Time:- 12 Hours Max,

Indicaters & Protection:- Outside the Cold Room : Temperature indicator, Controller & HP/LP protection & indication.

Internal lighting :- 4 nos. of 20 W LED fittings with IP 65. Fittings shall be of Philips / Schreder / Osram / Cree / Wipro

/ Bajaj / Havells Only.

Alarm(Hooter) :- Against High Temperature (settable),

Indoor unit Construction:- SS (Stailess Steel) Certificates required :-

1. Manufacturer of Indoor and Outdoor units.

2.PIR Panel Manufacturer Quality Certificate.

Vendors for Chilling Units:- Bluestar / Hitachi / Carrier / DAIKIN / Mitshubishi / Voltas / Rinac/ Sanyo / Lloyd Only.

MCB/MCCB/DB :- System shall be compatible with 415 V, 3 ph, 50 Hz Supply. MCB / MCCB / DB shall be Siemens /

MDS /L&T / MG / Indokorp / Schneider / Hager / Havells /ABB / C&S / Legrand Only.

Cable / Wire:- Work shall be including with cable from Panel /Supply to Cold room and internal wiring/cabling /

switch & accessories.

XLPE Cable :- CCI / Universal / Finolex / Incab / Torrent / Havells / Bharatcab / Gloster / Avocab / RR.

FRLS Wires:- RR / Finolex / Havells /Anchor / L & T / Polycab.

Modular Switch :- Anchor / Pointer /Crabtree / Havells.

Note :- Rate shall be included of :-

1.Every type of freight / transportation / loading / unloading / insurance / packaging / forwarding / watch and ward

2.Supply/Erection/Testing/Commissioning.

3.Any alteration in civil work.

Subtotal Part-12 ₹

PART 13: Generating Sets

SR. NO. DESCRIPTION QTY UNIT AMOUNT

PART (A) - CIVIL WORKS

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 & BS:5514

having continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled

diesel engine with multi-cylinders developing suitable BHP not less than following capacity at 1500 RPM with 10%

overload for one hour in 24 hours with standard accessories like fly wheel, lubricating oil cooler, "A" class governor,

heavy duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end exhaust manifold,

standard set of tools with adjustable spanners, screw drivers, cylinder head to cover, joint cylinder head to exhaust,

element lube oil filter, 12 / 24 volts electric starting equipment complete with standard heavy duty battery, dynamo,

cut-outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty Residential type exhaust silencer

(With DEF System) and vertical hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor mounted fuel with

level indicator and piping and drip proof alternator, self excited, self regulated, screen protected, with excitation

system, capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at

RPM, conforming to IS-4722- 1968 with voltage regulation +/- 5% of rated voltage from no load to full load. Both

the engine and alternator fitted on a common fabricated steel base plate with antivibration mounting engine and

alternator both connected to each other by flexible flange coupling and with floor/wall mounted control panel box

comprising of voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate capacity,

indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected with provided suitable

capacity armoured cable and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound

absorbing material Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of 40 Density - at least

40 mm. The resin bonded rockwool covered from inside the canopy by perforated sheet with 3/4 mm holes, sound

level not more than 75 dB at a distance of 1 mtr, as per PVCT norms.DG set should have in built fuel tank capacity of

minimum 8 hrs of continous running capacity on full load . Erection, commissioning and satisfactory testing as per

requirement with first filling of fuel (minimum up to the 80% of fuel tank capacity), oil, etc. with guarantee /

Warrantee of complete system for Two years. & with obtaining all necessary certificate from Electrical Inspector. The

Capacity and Ratings of DG sets are as below. (As per new CPCB4+ Emission norms Engine With - Turbo Charger, EGR

(Exhaust Gas Recirculation), CRS (Common Rail Fuel System), DOC (Diesel Oxidation Catalyst), SCR (Selective Catalytic

Reduction), Integrated wiring harness connected to ECU .)

(H) Continuous Rating of 50 KVA ,BHP not less than 65.8 BHP 1.00 Nos. 654382.03 ₹

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C.

diesel generating set complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for

generator contactor Neutral contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start

facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency

91 stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs.

3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head

temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.

The AMF Panel of following capacity

(A) AMF Control Panel for 50/62.5 KVA 3 phase DG Set 1.00 Nos. 97320.57 ₹

Subtotal Part-13 ₹

PART 14: ELV SYSTEM

92 SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots. Inbuilt Auto 1.00 Nos. 45398.49 ₹

attendant facility, Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / EI & VOIP program

Providing and erecting Standard Push button telephone (DTMF) Phones [[Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

Supplying & erecting push button type telephone instrument having speaker phone Caller ID & hands free dialing

94 system & 30 memories with display system Single line [[Approved by Competent Authority i.e. not Below the rank of 1.00 Nos. 565.60 ₹

Executive Engineer ]

Subtotal Part-14 ₹

TOTAL AMOUNT OF ELECTRICAL WORK ₹

TOTAL AMOUNT OF ELECTRICAL WORK ₹

PART (C) - Furniture work

SR. SOR RATE (23-

DESCRIPTION Qty. UNIT AMOUNT

Providing & fixing L- type table (Size:- 1.800m x 1.600m x 1.050m) with table top would be 38mm thick, made

out 18mm Commercial Plywood. All outer surfaces to be finished using 1mm thick laminate and bottom surface to

be finished with 1mm thick laminate as approved by architect.The vertical support of table would be 18mm

thick Commercial Plywood. The surface would be finished using 1mm thick laminate as approved by architect.

Front of the table is made using 18mm thick Commercial Plywood. It should have 2 nos. of drawer units

1 made out of 12mm thick Waterproof Commercial Plywood on all side &12 mm thick Commercial Plywood at

bottom. It should have 2 shutters made out 18mm thick Commercial Plywood. All Exterior surfaces of the table would

be finished in 1mm thick laminate & all internal surfaces would be finished with 1mm thick laminate as approved

by architect. including all necessary hardware & fittings like screw, lock, drawer channel, handle, key board

tray, cable manager etc. completed as per architect drawing & Instructed By Site Engineer. Commercial

Plywood Make- (Echotech, Century, Green), Laminate Make- (Century, Green, Royal Touch). (DWG No. ID/05)

As per SEZ TP.62, FP. R-19Reading Room 2.00 Nos 43,727.00

Storage Unit with table top would be 38mm thick, made out 18mm Commercial Plywood, central partition of

18mm. 20mm thick shutters made with 18 mm thick, back side surface of the unit is to be made with 12 mm thick , the

outer surfaces would be finished using 1mm thick laminate and all internal surfaces would be finished using

1mm thick laminate as approved by architect. Storage unit as per measurement from drawer and shutter side,

including all necessary premium quality hardware & fittings like screw,bonding material, lock, drawer

channel, handle,magnets, chain etc. completed as per architect’s drawing & Instructed By Site Engineer.

Commercial Plywood Make- (Echotech, Century, Green), Laminate Make- (Century, Green, Royal Touch). (DWG No.

As per SEZ TP.62, FP. R-19 Reading Room 2.70 SQM 27,819.00

Providing & Fixing table (size:- 2.400m x 1.200m x 0.750m) with table top 18mm thick Commercial Plywood

with 1.0mm thick lamination sheet fitting with Ghana Beading Patti. Vertical support should be made by

3 Commercial Plywood & Ghanna Beading Patti with french polish labour work with nessasary hardware etc.

completed as per site in charge instruction and as per details drawing. Commercial Plywood Make- (Echotech,

Century, Green), Laminate Make- (Century, Green, Royal Touch). (DWG No. ID/03)

As per SEZ TP.62, FP. R-19Reading Room 14.40 SQM 8,074.00

Providing of Other PVC Plastic Chair Length (47 cm), Width (51 cm), Height (89 cm) PVC Standard Brand chair as

per directed by Architect/Engineer - in - charge

As per SEZ TP.62, FP. R-19Reading Room 50.00 No 870.00

PVC Chairs Providing and fixing PVC Arm Chairs having Premium Matt Finish with soft feel texture finish,

having Size: 600 mm D * 560 mm W * 885 mm H, as per the Specified Company of HOF, Feather Light, Wipro,

Godrej, Neelkamal, Supreme etc.as per selection and complete the work satisfactorily as per instruction of architect

or Engineer-in charge

As per SEZ TP.62, FP. R-19 Reading Room 50.00 No 1500.00

Providing and fixing of soft board of size 1 x 1.8 Quartet White Frame Cork Board, Bulletin Display Board, Pin Board,

6 Lightweight Board for offices with backing of wood with complete installation and mounting with other hardwares,

waste of materials etc and complete the work satisfactorily as per instruction of architect or Engineer-in charge.

As per TP.22, FP.81 Reading Room 7.20 SM 2424.00

Providing and fixing 2-seater LINK CHAIR with moulded foam, seat in 304 stainless steel beam: cold rolled steel arm &

7 leg:304 stainless steel of brand as per architects selection,and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.

As per TP.22, FP.81 Reading Room 2.00 No 8700

METAL RACKS : Providing and fixing of storage rack of angle slotted type of size 78” x 36” x 18” with 6 shelfs(20 swg)

8 ,including all hardware,colours, channels, etc.and complete the work satisfactorily as per instruction of architect or

Engineer-in charge.

As per Approved Rate in EZ-A April-2025 32.00 No 3500.00

Providing & making wooden partition using 08 mm thick commercial plywood with 01 mm thick laminate, 3" Ö 1" size

teakwood frame, 3" Ö 0.5" molding patti, 08 mm clear glass & necessary hardware material etc., french polish finish

complete respected by drawing & engineer-in-charge.( Plywood- Saras, Kitply, Uniply, Anchor, Green, Wood Stock,

Everest, Euro or Century), (Laminate - Green Laminates, Century, New Mica make) (Size H 5'-0" x W 4'-0")

As per Approved Rate in EZ-A April-2025 5.00 Sq. ft 450.00

Proving and Fixing of 2mm TK S.S 316 grade matt finish Name Plate with cut work and fixing 3mm acrylic

on top or behind of brand Pt glass, astari etc, with all laser and cnc work and wooden finish back board

10 including all meterial, Scaffolding labour, 15mm SS Studs for mounting and other hardwares, waste of

materials etc and complete the work satifactorily as per instruction of architect of Engineer in charge. (BASIC

SIZE OF NAME PLATE 150mm X 900mm)

As per Approved Rates of Ward office TP 03 FP-

M/03 (Gotalawadi) NZ Katargaam

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Providing & fixing Powder Coated Aluminium partly glazed and partly panelled PART (A) - CIVIL

partition usingWORKS

sections of Hindalco,Zindal, Narmada, Banco or Equivalent approved make having section 63.50 mm x 38.10mm

( Frame-.758 kg/rmt & Middle section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick clear float glass of approved

11 make including all other necessary fittings and fixtures. Entire work will have to be made water proof using necessary

rubber sectioned wherever required. Gaps all round the frame to be filled with approved water proof sealent. Bottom

portion of doors both side to be covered with 12mm thick prelaminated particle board of approved make and

quality and as per design.

(A) Same as above but Colour anodized 78.300 SM 2400.00

Providing & fixing partly panel & partly glass Powder Coated Aluminium doors with aluminium section of Hindalco,

Jindal , Narmada,Banco or Equivalent approved make having Poder Coated outer frame Leg Partition section of

mm x 38.10 mm having weight 1.158 kg. / R.M. shutter section having size 83.5 mm x 44.45mm ( top & bottom:

kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing side:0.974

kg./mt.), Glazing Clip (Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass in acid frogting and

mm thick prelaminated sheet of Greenlam, Panama or archid make as approved by Engineer-in-charge including fixing

brass pivot, handle, lock etc.complete.

(A) Same as above but Colour anodized 15.000 SM 3237.00

Plain Gypsum Sheet Ceiling: Providing and fixing of Plain Gypsum Sheet Ceiling using 80 mm. x 26 mm. x 0.50 mm.

thick g. i. Ceiling Sections, 15 mm. x 45 mm. x 15 mm. x 0.90 mm. thick Intermediate Channels, 20 mm. x 28 mm. x

mm. x 0.50 mm. thick Perimeter Channels and 25 mm. x 10 mm. x 0.50 mm thick Ceiling Angles, as per IS 513 &

GSM Galvanised finish as per IS 277, including 8 mm Dia. 45 mm long, Zinc coated, CR1 grade Rawl Plugs, 27 mm x

mm x 25 mm x 1.60 mm thick Soffit Cleats, 2.64 mm Dia. High Carbon Spring Steel Wire Connecting Clip, confirming to

IS 513, 12.50 mm Th. Tapered Edge Gypsum Board Plain, conforming to IS 2095- Part 1: 2011 Certified Boards, Screw

Fixed to Ceiling Sections, using 25 mm Drywall Screws [material-carbon steel EN-ISO 7049/50, finish-case hardened

Grey Phosphating] at 230 mm c/c on Ceiling Sections & 150 mm at Periphery of Ceiling. Square and tapered Edges of

the boards shall be jointed and finished so as to have a flush look, including filling and finishing with Jointing

Compound, conforming to ASTM C475, & Joint Paper Tape etc. complete with all Material, Labour with all Lead, Lift and

Transport and complete the work satisfactorily as per instruction of Architect & Engineer-in charge, as per

"Architecture" detail.

As per Approved Rates of New ED-1 (Hospital Block) of SMIMER Campus

Grid Ceiling: Providing and fixing in True Horizontal level 600 mm. x 600 mm. false ceiling in 24 mm C.B Grid system

manufactured by GYPTECH or Eq. Brand using hot dipped galvanized steel Section, Exposed Surface with pre coated

capping, Main Tee of size 24 mm x 32 mm., having 0.30 mm Gauge at every 1200 mm Center to Center Maximum and

Rotary Stitched Cross Tee of size 24 mm x 26 mm, having 0.30 mm Gauge at every 600 mm. c/c. and Sub Cross Tee of

size 24 mm x 26 mm, having 0.30 mm Gauge at 1200 mm c/c. and wall angle of size 24 mm x 24 mm., having 0.40 mm

Gauge fixed to the periphery of the wall. The above grid is suspended with 50 x 50 x 2 m thk. Jindal or Eq. make

Aluminium Angle fix with necessary Anchor Fastner on Slab Bottom Longer Span with Accessories such as Nuts, Bolts,

Washer, Fastners etc. in both directions. Gyptech Vinyl Laminated Gypsum Panel Square Edge Ceiling tiles

manufactured by GYPTECH or Eq. Make, of size 595 mm x 595 mm x 12 mm thermal conductivity k = 0.16 W/m.K,

having Moisture Resistance & Fire Protection, having lighter, smoother and more uniform Texture shall be laid evenly.

The vinyl finish on the Gypsum panels Seals out Moisture, Bacteria, Dirt and Odors. Lay in the modulus for the flush

look incl. All Materails, Labour, Scaffolding, etc. complete as per instructions of Architect..

As per Approved Rates of New ED-1 (Hospital Block) of SMIMER Campus

TOTAL AMOUNT OF FURNITURE WORK

TOTAL AMOUNT OF FURNITURE WORK

(A) TOTAL AMOUNT OF CIVIL WORK

(A) TOTAL AMOUNT OF CIVIL WORK

(B) TOTAL AMOUNT OF ELECTRICAL WORK

(B) TOTAL AMOUNT OF ELECTRICAL WORK

(C) TOTAL AMOUNT OF FURNITURE WORK

(C) TOTAL AMOUNT OF FURNITURE WORK

Executive Engineer

East (Varachaa) Zone-A

Signature of the Contractor: Surat Municipal Corporation.