Repair/Renovation of toilet block, aluminium windows, false ceiling, flooring, fencing, gates, walls, pathways and related electrical wiring and fittings of ERP project office.

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level).

Dismantling boarding, any description, fixed in any position with screws.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Dismantling posts or struts (wood, steel, or RCC) any section, including taking out embedded portion from concrete and making good disturbed ground.

Dismantling Fencing wire mesh, any type.

Dismantling single layer Manglore pattern or similar tiles in roofing.

Dismantling battens spaced exc. 15 cm for tiles, shingles etc. of any size including tiling fillets.

Dismantling framed timber scantling in fillets, rails, posts, rafters, purlins etc under 40 sq cm in section.

M&L second class hard-wood in scantlings timber wrought framed and fixed.

S&F 2nd class hard wood battens sectional area exc. 15 & n. exc. 25 sqcm at 25 cm centre to centre.

M&L for Roof tiles, Mangalor pattern, interlocking at side joints, laid dry etc.

M&L for Weather boarding of IInd class hardwood, clean swan, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store, Bore dia of pipe 15mm.

Surface Excavation not exceeding 30 cm deep and getting out in Hard/ dense soil.

Excavation in trenches n. exe 1.5m wide and n. exe 1.5 in depth; for foundation etc . exe or for manholes etc n. exc 10 sqm on plan and n. exe 1.5m depth and getting out in :- Hard/ Dense soil.

M&L for providing cement concrete type B2 1:2:4 mix (40mm graded aggregate) in foundations, filling and mass concrete.

M&L for providing Reinforced Cement Concrete type B1 1:2:4 (20mm graded aggregate) in Foundation, including rafts, footing, foundation beams, plinth beams; bases for columns, etc basement slabs, under reamed piles and mass concrete etc complete.

M&L for providing formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar works, vertical or to batter rough finished surface of concrete flat.

M&L for providing Reinforced Cement Concrete M-30 grade (Design mix) 20mm graded aggregate in Columns, pillars, piers, posts and struts.

M&L for providing formwork to sides of pillars, posts, struts, piers, columns and stanctions for rough finished surface of concrete flat.

M&L providing precast cement concrete type C1, 1:3:6 (20mm graded aggregate) in block masonry with solid blocks, exc 10cm width and setting in cement mortar 1:6, complete

M&L for rendering 20mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including applying, neeru finish to plastering as specified.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including sand faced finish to plastering as specified.

M&L for rendering 20mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including finishing the plastered surface even and smooth without using extra cement.

M&L for screed bed or bedding layer of mortar 25mm thick for laying floor finishes in CM 1:4

M/L for Virified Ceramic Tiles 10mm thick (square/ rectangular) polished, area of each tile exc 0.36 sqm but n exc 0.42 sqm, in floors etc in light shade, set jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for Non-skid coloured cermaic tiles 7mm to 8mm thick (joint free) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match. (Make- Johnson, Rak, Kajaria).

M/L for joint free colouerd Glazed Ceramic tiles in vertical suraces 350 x 250mm x 7mm / 450 x 350 x 7mm/ 450 x 300x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for Chequered cement concrete tiles with white cement and pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.

M&L for 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, door frames, window-cill, cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite. Type - Telephone black, ruby red or equivalent

M&L providing precast cement concrete type B1, 1:2:4 (20mm graded aggregate) in window or door cills, lintels, bresummers, steps, kerbing etc and similar articles etc. set in cement mortar 1:6.

M&L for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S&F Mild steel of grade Fe-410-W for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, staining bolts etc including provision of binding wire.

Supplying only chain link MS galvanised fencing, mesh size 75mmx75mm and dia of wire 10 gauge.

S&F framed worked such as grills, gratings etc with ends of bars shouldered and/or rivetted, or forged into spikes, framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; frameworks of water tanks and similar work conforming to be Fe 290. Gde-E-165.

M&L MS Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St - 240.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tappinf screws as specified. Make: JSW, Tata, Essar.

S&F Anodised Aluminium snap grid frame work for false ceiling all as specified, size of grid 605x605 mm.

M&L for Non asbestos fibre cement plain building boards 6mm thick, fixed or laid or inserted to timber/ GI/ aluminium frame work with screws in ceiling flat or sloping. Make: Charminar, Swastic, Birla.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type covered with laminated sheet with lipping/ frame to match on both faces.

S&F Aluminium anodised barrel tower bolt of extruded section, length of bolt 200mm.

S&F for mild steel butt hinges, heavy weight, cold rolled. Size of hinges 125mm.

S&F Aluminium handle, cast type anodised, size of handle = 150mm

M/L Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed bolt=375mm.

M&L for 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5sqm in each pane.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) fixed in trap etc complete.

S&F PVC flushing cistern valveless, syphonic action type, low level, white with inlet, ball and valve float and handle including brackets and connection to pipe and fixing lever if any for 10 liter capacity.

S&F viterous china wash hand basin flat back size 630mm x450mm with brackets and pedastal but exculding taps, waste chain and plug and porocelain stopper

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe).

S & F CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified, for outer dia of pipe 32mm .

S & F CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified, for outer dia of pipe 20mm .

S & F CPVC brass elbow 3/4 x 1/2, for outer dia of pipe 20mm .

S & F CPVC male brass threaded adaptor (MTA/ MBTA), for outer dia of pipe 20mm

S & F CPVC female brass threaded adaptor (FTA/ FBTA), for outer dia of pipe 20mm .

S & F PP- R Gate valve (brass inserted as per requirement at site, outer dia of pipe 20mm.

S&F low density polyethylene (LDPE) pipes or pressure rating 6 kgs/sq.cm fixed complete to walls, ceiling or in floors etc. bore of tube 32 mm.

S&F chromium plated fancy type Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipes or brass ferrule and fixed, bore dia of pipe 15mm.

S&F fancy type Pillar taps cast copper alloy chromium plated screwed down high pr. with or without lettered 'hot' & 'cold' with long screw shank and fly nuts, screwed for pipe and fixed in repair, bore dia of pipe 15mm.

S&F chromium plated fancy type stop valves cast copper alloy, screwed down high pr. with crutch or butterfly handle screw both ends for iron pipes or for unions and fixed in repairs bore dia of pipe 15mm.

S&F waste fittings brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed loose of pipe 32mm.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, bore of pipe 110mm.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, bore of pipe 75mm.

S&F PVC bends without access door bore of pipe 75mm.

S&F PVC bends without access door bore of pipe 110mm.

S&F PVC single Tee with access door bore of pipe 110mm.

S&F PVC (SWR) floor trap with grating including jointing to waste pipe with solvent cement diameter of outlet = 75mm.

M&L for providing concrete bed to drain pipes including forming cradles in cement concrete 1:3:6: type C2 (40mm graded aggregate) Bore of pipe 150 mm.

M&L for Reinforced concrete drain pipe (for sewer and drains) of class NP2 laid and jointed complete with collors, including testing drains as specified by filling the pipes with waater to a head of 1.5m at the highest point including tempararily fixing of bends, etc as required. Bore of pipe 150 mm

S&F Powder coated Anodised Aluminium frame for doors, window, ventilaors and partitions with one or more rebates including joining cleat for fixing etc all as specified.

S&F Powder coated Anodised Aluminium window and ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos), suitable handle (1 Nos) complete all as specified.

M&L for 4.80mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5sqm in each pane.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each and refixing in same opening after resecuring or easing and adjusting for height.

M&L for preparing plastered or unplastered new surfaces and applying two coats of oil emulsion distemper on ceiling over one coat of alkali resistant primer.

M&L for finishing walls with Acrylic smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/ 10 Sqm over and including priming coat of exterior primer applied @2.20 kg/ 10 Sqm)

M&L for preparing old painted surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint on wood or wood based surfaces.

M&L for preparation of new or previously untreated steel or iron surfaces of any description, not otherwise mentioned over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

M&L Point wiring in PVC casing & Capping for one light point / one fan point /Bell point controlled by one switch with PVC insulated stranded copper conductor (FR class 2) wire 1.5 sq. mm size including material and labour. (Make of wire - Polycab, Finolex, KEI, RR Kable & PVC Casing & Capping - Modi, Dimond, Pressfit, Polycab only.)

Supply and fixing of modular switch, 1 way, 6A, 1 module. Make- Legrand-Allzy / Anchor- Roma / L&T-Englaze / Havells-Crabtree only.

Supply and fixing of modular metal / Plastic /PVC Heavy duty flush box, 6 module.

Supply and fixing of modular metal / Plastic/ PVC Heavy duty flush box, 3 module.

Supply and fixing of modular white cover plate with frame , 6 module. Make- Legrand-Allzy / Anchor- Roma / L&T-Englaze / Havells-Crabtree only.

Supply and fixing of modular white cover plate with frame , 3 module. Make- Legrand-Allzy/ Anchor- Roma / L&T-Englaze/ Havells-Crabtree only.

Supply and fixing of modular metal / Plastic/ PVC Heavy duty flush box, 2 module.

Supply and fixing of modular white cover plate with frame , 2 module. Make- Legrand-Allzy / Anchor- Roma / L&T-Englaze / Havells-Crabtree only.

Supply and fixing of modular metal / Plastic/ PVC Heavy duty flush box, 1 module.

Supply and fixing of modular white cover plate with frame , 1 module. Make- Legrand-Allzy / Anchor- Roma / L&T-Englaze / Havells-Crabtree only.

Supply and fixing of Celling rose with plate/board, 3 point,, PVC/Polycarbonate, Isolated body. Make- Legrand-Allzy / Anchor- Roma / L&T-Englaze / Havells-Crabtree only.

Supply and fixing of Lamp holder, angular/ batten, PVC/ Polycarbonate type with plate/ board suitable for batten fittings , PVC/ Polycarbonate, Isolated body. Make- Legrand-Allzy/ Anchor- Roma/ L&T-Englaze/ Havells-Crabtree only.

Supply & Fixing of exhaust fan, steel body AC single phase, 230 Volt of size 300mm sweep with blades and frame and louvers, prewired up to connection of make Automberg, Orient, Crompton, Havells , Usha, Almonard only.

Supply and fixing LED luminaire (Panel light) 600mmx600mm, 35/36 watt, 220 Volt, AC recessed type with high efficiency PMMA diffuser soft glare free light complete driver, hollder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. make- Crompton, Sysca, Wipro, Orient only.

Wiring for circuit/sub main wiring along with earth wire with 2X4 Sq. mm + 1X4 sq. mm earth wire sizes of FR PVC insulated stranded copper conductor, single core cable in surface/recessed as required in PVC Casing & Capping including material and labour. Make of wire- Polycab/Finolex/KEI/RR Kable only. make of Casing capping - Modi, Pressfit, Polycab only

Supply and fixing of sheet metal encloser, double door, triple pole and neutral, 415 v, 4 way three-phase DB Make - Legrand/ Indoasian/ Schneider/ ABB/ L&T only.

Supply and fixing of sheet metal encloser, single door MCB DB 240 v, single phase phase, 8-way, for 8 MCB SP, with neutral link, Make - Legrand /Indoasian /Schneider /ABB /L&T only.

Supply and fixing of RCBOs Earth leakage, Overload & Short- Circuit Protection 30 mA, Double pole, 40 Amp. 240V, complete with connection testing and commissioning. Make - Legrand/ Indo asian/ schneider/ ABB/ L&T only.

Supply and fixing of MCB, C-Type, 10kA, Single Pole (MCB SP), 240V, 6A,-32A complete with connection testing and commissioning. Make - Legrand/ Indo asian/ schneider/ ABB/ L&T only.

Supply and fixing of TP (Triple pole ) MCB, C-Type, 10kA, , 415V, 25-63 Miniature Circuit Breaker complete with connection testing and commissioning. Make - Legrand/ Indo asian/ schneider/ ABB/ L&T only.

Supply and fixing of TPN (triple pole with neutral) MCB, C-Type, 10kA, , 415V, 40-100A Miniature Circuit Breaker complete with connection testing and commissioning. Make - Legrand/ Indo asian/ schneider/ ABB/ L&T only.

M&L Steel tubular ploes complete with cast iron base plate, final tapper plug, bolts, nuts and screws as specified type 410 SP-22 minimum 8.5 Mters long including clamps and coat of oil paint with primer.

S&F two way Marshal box / Street light cable connector box, with clamps and 6A C Class SPMCB, suitable for outdoor use (IP 65) and required provision for minimum 2 Nos. 4 core cables connection including gland and prewired. Make- Sintex/ Electra/ American only.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross section area 10 Sq mm 4 core. Make Polycab, KEI, Havels only.

Supply and laying insulated, armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross section area 4 Sq mm 2 core. Make Polycab, KEI, Havels only.

Supply and laying of galvanised steel tubes, medium grade size 40 mm, include for one plain socket to each length of pipe. Make:- Tata, JSPL only.

Supply and fixing LED Street light fittings 60 watt 230v AC outdoor type with high pressure dia cast aluminium hosing and heat resistant complete with driver , lamp pipe, bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. make- Crompton, Sysca, Wipro, Orient, Bajaj only.

Supply and fixing LED Bolard fittings fittings 10-20 watt 230v AC outdoor type with complete with driver , lamp, pipe, bracket, nut bolts Aluminium body corrosion resistant, minimum hight of the fitting 600 mm complete with IP 65/66 protection. including cement concrete foundation up to one feet depth and 6 inch over the ground complete. make- Havells, Jainsons lights, Crompton, Sysca, Wipro, Orient, Bajaj only.

Excavation in trenches n. exe 1.5m wide and n. exe 1.5 in depth; for foundation etc . exe or for manholes etc n. exc 10 sqm on plan and n. exe 1.5m depth and getting out in :- Hard/ Dense soil.

Excavation in trenches n. exe 1.5m wide and n. exe 1.5 in depth; for foundation etc . exe or for manholes etc n. exc 10 sqm on plan and n. exe 1.5m depth and getting out in :- Soft/ Disintegrated rock.

Excavation in trenches n. exe 1.5m wide and n. exe 1.5 in depth; for foundation etc . exe or for manholes etc n. exc 10 sqm on plan and n. exe 1.5m depth and getting out in :- Hard rock.

Excavation in trenches n. exe 1.5m wide and n. exe 1.5 in depth; for foundation etc . exe or for manholes etc n. exc 10 sqm on plan and n. exe 1.5m depth and getting out in :- Hard rock.

M&L Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:6.

M&L Rendering 10mm thick on fair faces of brickwork or concrete surface in cement plaster 1:4.

Supply and fixing of galvanized tubes medium grade 15mm bore with all fittings laid in to in trenches.

Providing of earthing complete with galvanised steel earth electrode of size 60cmX 60cm X 6mm thick buried directly in ground ( earth pit depth not less than 2.25mtr below normal ground level)with top edge of the earth plate not less than 1.5mtr below the normal level connected to Galvanized Iron (GI) earth strip 25x4 mm by means of nuts bolts washers, check nuts etc.of GI / s.steel all as shown on electrical plate No.3 connected to earthing test point all as specified or indicated including testing on completion. including charcoal & Salt and all other materials.

Supply and fixing Cast iron work grade FG 150 unmachined , in brackets ,gully traps, grating railings , frames ,manhole covers , fire and soot doors, dampers, stop valve boxes, gate stops, part of ranges balusters and similar articles including material and labour . Article n exc 5 Kg each.

Supply and fixing of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit or pipe or fixed to poles or any other indicated situation for loop earthing etc. as required, 25X4 mm galvanised iron strip.

M/S Hrushikesh A. Patil

Ambaji Corporation