REPAIR TO CERTAIN BnR WORKS INCLUDING FLOOR, JOINERY, SANITARY, PLUMBING AND MISC. WORK IN DOMESTIC AREA OF AF STATION IZATNAGAR, BAREILLY.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.

M & L for 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles complete all as specified and directed.

M & L for glazed ceramic coloured tiles 450 mm X 300 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connection complete all as specified and directed.

S & F of 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting not exc. 10 cm in girth complete all as specified and directed.

S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part-I and hoisted, fixed in position with and including dismantling of old water tank complete all as specified and directed.

S & F of 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed.

S & F in repairs 20 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F in repairs vitreous china urinal partition, white of size 310 X 700 mm, slab terminating about 40 cm above finished floor level complete all as specified and directed.

S & F in repairs vitreous china half stall type white urinal with and including chromium plated brass spreader, providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinal to plug with and 60 cm long brass screws, pointing around urinals back in cement morter, including making connections to flushing pipe and out going pipes etc. complete all as specified and directed.

S & F in repairs vitreous china wash hand basin, white, flat back, size 550 X 400 mm excluding taps, waste, chain and plug but including 32 mm size PTMT waste coupling, brackets, cutting for and pinning in as required complete all as specified and directed.

S & F in repairs water closet vitreous china squatting pan ‘Orrisa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed.

S & F in repairs polymer white (polypropylene Delrin and ABS) low level flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, flush pipe, brass screws, handle etc complete having BIS description mark with IS: 7231 with and including 32 mm bore PVC flush pipe of suitable length complete all as specified and directed.

S & F in repairs 15 mm size bib tap standard of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.

S & F in repairs 15 mm size stop valve of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.

S & F of 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S & F of 32 or 40 mm dia PVC flush pipe of polyethylene of low or high density suitable for low level flushing cistern complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

S & F of 100 mm dia grating doom of PTMT (minimum weight 25 gram) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-1, using 20 mm graded stone aggregate as in plinth protection laid to slope of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

M & L for 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed.

S & F in repairs Chromium plated health faucet with hand shower, hanging hook & flexible cord minimum 1.00 m long, suitable for EWC including fixing to steel pipe or union complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F in repairs 15 mm size swivel shower rose of PTMT, any colour (minimum weight 40 gram) with and including 15 mm size, 195 mm long shower arm of PTMT, with bend of 45 degree with flange any colour (minimum weight 40 gram) complete all as specified and directed.

S & F in repairs shelf of PTMT (minimum weight 300 gram and minimum size 100 X 600 mm) fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

S & F in repairs 20 mm dia brass chromium plated tubular towel rail 'D' type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.

M & L for providing and fixing 12 mm thick Gypsum Board as in ceiling fixed with screws as per manufacturer’s instructions complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet complete all as specified and directed.

Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down door or window shutter of any description exc. 1.00 sqm but not exc. 2.00 sqm each complete all as specified and directed.

M & L for 2nd class hard wood (SAL) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F of flat iron bands, straps, supports, clamps, hold fasts, wall ties, hooks for hanging fans and other similar small steel article confirming to Fe-290 Grade E-165 with and including necessary nut-bolts, washers, screws etc. as required complete all as specified and directed.

M & L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneers on both faces and size of the members of shutter are as per IS-1003 (Part-I) made of kiln seasoned and chemically pressure treated 2nd class hardwood complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, gauze etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, Part-I (Specifications) complete all as specified and directed.

S & F of 300 mm long mild steel sliding door bolt, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts complete all as specified and directed.

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F of 125 mm long mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed.

S & F of 150 mm long (Length of bolt) mild steel barrel tower bolt stove enamelled black with bright bolt complete all as specified and directed.

S & F of 300 mm mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F of factory made steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay, 02 Nos. mild steel tower bolt 100 mm size with each shutter, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F of factory made steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay, 02 Nos. mild steel tower bolt 100 mm size with each shutter, without glazing bars complete all as specified and directed.

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 complete all as specified and directed.

S & F of galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing new glazing pins / spring clips complete all as specified and directed.

S & F of 4 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square exc. 0.5 sqm in each pane complete all as specified and directed.

S & F of 4 mm thick one side plain and other frosted, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square exc. 0.5 sqm in each pane complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick wood grain printed PVC sheet and edges will be painted to match with printed sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet beading of size 15 mm X 5 mm thick stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with decorative PVC beading of size 10 mm X 10 mm (900) and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F of 150 mm long anodised aluminium handle, cast type complete all as specified and directed.

S & F of 100 mm long stainless steel butt hinges, medium type complete all as specified and directed.

S & F of 140 mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S & F as in repairs 18/19 mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination and fixed with screws to timber framework complete all as specified and directed.

S & F of 30 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed.

VISHAL CONSTRUCTIONS

M/s M Aali construction co

MOHINDER SINGH AND SONS

M/S Quality Constructions

S.K.Enterprises